ReviewsTerminal Crimping Tools

Jonard Tools TK-17 Punchdown Tool Kit for 66/110 Blocks

  • SPECIFICALLY DESIGNED: Designed to repare and connect wire onto 66-type and 110-type punchdown terminal blocks.
  • TELECOM & NETWORK TOOLS: This kit has the tools needed for maintaining telecommunications and data communications networks.
  • INCLUDES: Punchdown Tool for 66 & 110 Blocks, 6-in-1 Mulit-bit Screwdriver, Ergonomic Electrician's Scissors, Cyclops Wire Stripper, LED Flashlight, Insluated Probe Pick, and Combo Crimping Pliers all stored in a Molded Tool Pouch.
Check Stock

TEMCo 4ga-750mcm HYDRAULIC LUG CRIMPER TOOL TH0034 - Electrical Battery Terminal Cable Wire

  • ❀【HIGH PRECISION JAW DESIGN】 Crimper with high precision jaw ensure a tightly connection after crimping with strong work pressure. This tool has....
  • ❀【ROTATE CRIMP DIES】The professional cable terminal crimping tool has 6mm²/10mm²16mm²/25mm²/35mm²/50mm² (Similar to AWG....
  • ❀【EASY OPERATION】 Press the screw and rotate the dies to the size you need, then just take a strong pull of the ratcheting wire terminal crimper....
  • ❀【ERGONOMIC DESIGN】The handle of the wire crimper is long for 10 inch and wrapped with soft rubber, ergonomic lever structure design can....
  • ❀【12PCS LUGS TUBULAR RING TERMINAL CONNECTORS】The crimper set contains 12PCS ring terminal connectors, save your time and money to buy other....
Check Stock

Battery Cable wire Lug Crimping Tool for AWG 8-1/0 terminals with Cable Cutter and 20PCS Tubular Ring Terminal Connectors and 20PCS 3:1 Dual Wall Adhesive Heat Shrink Tubing

  • Crimper with high precision jaw ensure a tightly connection after crimping with strong work pressure. This tool has widely application in automatic electronics work..
  • The professional cable terminal crimping tool has 6mm²/10mm²16mm²/25mm²/35mm²/50mm² (Similar to AWG 8,6,4,2,1/0) wire size crimping, using rotating heads with a spring loaded locking pin to keep the heads in place..
  • Press the screw and rotate the dies to the size you need, then just take a strong pull of the ratcheting wire terminal crimper then produce a good crimp on cable lugs..
  • The handle of the wire crimper is long for 10 inch and wrapped with soft rubber, ergonomic lever structure design can increase friction and help you use less effort when crimping..
  • The crimper set contains 20PCS ring terminal connectors(AWG8-5/16,AWG6-5/16,AWG6-3/8,AWG4-5/16,AWG4-3/8) save your time and money to buy other connetors..
Check Stock

IWISS Weather Pack Crimper Tools for Delphi APTIV Packard Weather Pack Terminals Metri-Pack Connectors for Sealed Terminals

  • Delphi WeatherPack Crimper: IWS-1424B Metri-Pack and Weather Pack crimp tool aids in the assembly process of the Metri-Pack 150 & 280 and Weather Pack connector lines. The crimpers are designed to crimp the terminals and seals found in the Metri-Pack and Weather Pack series..
  • Stamped Terminal Crimping Tool: Crimps a wide variety of open barrel contacts, including D-subminiature in small size wire ranges. Crimps conductor and insulation portion of contacts in separate cavities..
  • Two Step Crimping: Designed to crimp the core and insulation wings in a separate motion. Tool must be closed twice to complete termination.Has three wire crimping and two seal crimping positions. Thin profile allows access to hard to reach areas..
  • Suits for: Weather-Pack, Metri-Pack 150 Sealed, Metri-Pack 150 Unsealed, Metri-Pack 280 Sealed, Metri-Pack 280 Unsealed..
  • Applications: IWS-1424B allows the automotive DIYer to install weather-tight connectors with tools that were previously only available to the professionals. Replace damaged factory-installed connectors or add accessories while maintaining full factory wire harness integrity. A must have tool for making OEM wires and pigtails..
Check Stock

Battery Cable Crimping Tool Battery End Crimper Lug Crimper Tool for 8, 6, 4, 2, 1, 1/0 AWG Heavy Duty Wire Lugs with Wire Shear Cutter, Crimping Tool 4AWG by BOOTOP PIN

  • ...ms in harsh-duty environments. Cable lugs can be found on the wiring systems of automobiles, electrical boxes, panels, generators, transformers, many durable goods, and for all electrical lugs appliances..
  • 【ROTATE CRIMP DIES,EASY OPERATION 】Compact rotation die for effortless die changing.The professional cable terminal crimping tool has 6mm²/10mm²/16mm²/25mm²/35mm²/50mm² (Similar to AWG 8,6,4,2,1/0) wire size crimping, using rotating heads with a spring loaded locking pin to keep the heads in place. Press the screw and rotate the dies to the size you need, then just take a strong pull of the ratcheting wire terminal crimper then produce a good crimp on cable lugs..
  • 【High Quality,ERGONOMIC DESIGN】Battery lug crimping tool made of high quality carbon steel which can offer long service life. Hexagonal rotating dies of Lug Crimper Tool are processed with Wire EDM Cutting, more accurate than normal casting dies. Crimper with high precision jaw ensure a tightly connection after crimping with strong work pressure. The handle of the wire crimper is ergonomic lever structure design helps you use less effort when crimping..
  • 【Cable Cutter】Heavy duty wire crimper tool comes with cable cutter made of chrome vanadium steel with induction-h....
Check Stock

IWISS IWC-1424A Crimping Tools for Deutsch DT Series Stamped & Formed Contact, Open Barrel Terminal Crimping Tool, AWG14 to AWG24 Wire Crimper

  • Open Barrel Terminal Crimper: IWC-1424A open barrel crimp tool is designed to crimp non-insulated, open barrel terminals, also known as OEM terminals. It has five crimp stations that roll the open barrel terminal tabs over the wire and insulation, crimping them to the terminal..
  • Deutsch Stamped Contact Size 16 Crimp Tool: IWC-1424A is also designed for crimping Deutsch stamped pins and sockets, Size 16, AWG14 to AWG 18. Series: DT,HD30,HDP20,DRC,HD10,DRB,DTV.AEC,STRIKE,Jiffy Splice..
  • Two Step Crimping: Crimps conductor and insulation portion of contacts in separate cavities. Tool must be closed twice to complete termination..
  • B Profile Crimps: Insulation crimps are "B" type and are produced in two cavities.: 18-14 AWG and 24-20 AWG. Conductor crimps are "B" type and are produced in three cavities: 16-14 AWG, 20-18 AWG and 24-22 AWG..
  • IWC-1424A universal “U” Barrel Crimp Tool is perfect for 24 to 14 gauge wire used with AMP, Deutsch, Delphi or any other stamped terminal. A must when servicing any motorcycle. Made from high quality carbon steel with black oxide finish for corrosion resistance and durability..
Check Stock

Olsa Tools Ratcheting Wire Crimper | Crimp Tool for Wire Connectors, Butt Connectors, Spade Connectors and Insulated Electrical Connectors | Wire Terminal Crimping Tool | Professional Terminal Crimper

  • ...ol automatically releases when the proper amount of force has been applied, ensuring every crimp is consistent..
  • ★ EASIER CRIMPING - Featuring a dual-lever design, the crimper amplifies your crimping force, easing strain on hands and ensuring an extra strong connection. Works with color-coded red, blue, and yellow terminals for 22–10 AWG wires..
  • ★ RATCHETING ACTION - The ratcheting action allows you to pause mid-crimp to get a better grip and will release automatically once the crimp is complete. It also conveniently enables you to secure a wire connector in the jaw before inserting the stripped wire into the barrel..
  • ★ ERGONOMIC HANDLES - These large, non-slip handles are designed to ensure a strong and comfortable grip. Compared to the cheap crimpers that usually come bundled with a wire terminal set, this tool is way easier on your hands, and won't leave your hands sore at the end of the day..
  • ★ OLSA TOOLS TRUST - Our deep commitment to quality is the reason why tool fanatics like you keep coming back to us for more. All hand tools from Olsa Tools are backed by a limited lifetime warranty that protects your investment against any manufacturer defects. All you need to do is get in touch with us and we’ll make it right by you, guaranteed..
Check Stock

IWISS Deutsch Closed Barrel Crimper, Stamped Contacts Crimper and Weather Pack Terminal Crimper Tool Kit w/ Extraction Tools-12pcs included

  • 「12 PCS TOOL KIT」Applicable to Automotive, Heavy Duty, Marine, RV, AG, Construction Equipment and Maintenance Industries.
  • 「IWD SERIE CRIMPERS」Upgraded internal structure ensures the stability and power equality on the pins,brings high precision to solid contacts for Deutsch DT,DTP,DTM,DTHD,HD10,HD30,HDP20,DRC,DRB serie and Amphenol AT,ATP,ATM,ATD serie connectors.
  • 「IWC-1424A OPEN BARREL CRIMPER」Five cavities perform B shape conductor for Deutsch stamped &formed contacts,and other open barrel terminals with crimping range AWG24-14.
  • 「IWC-1424B WEATHER PACK CRIMPER」Smooth polished cavities brings durable connection for Weather Pack and Metri-Pack terminals,meets assembly requirements of automotive harness industry with crimping range AWG24-14.
  • 「VARIOUS RELEASE TOOLS」5 Deutsch Terminal release tools,1 Weather Pack terminals release tool and 1 Contact and Wedgelock removal tool included.
Check Stock

CNAODUN Ferrule Crimping Tool Kit with 1200PCS Wire Ferrules Terminals AWG 23-7 Self-Adjustable Ratchet Wire Ferrule Crimper

  • ♥【What You Get】 Each ferrule crimping tools kit comes with a wire ferrule crimping tool and 1200 pcs wire crimp pin terminal connector in the most commonly used sizes..
  • ♥【Superior Quality】The pressing mouth of the wire clamp is forged by alloy steel, with strong hardness and good toughness. The handle is made of engineering plastic, which is non-slip and durable..
  • ♥【Unique design】The wire clamp features a quadrilateral crimp profile with four serrated crimp surfaces, an adjustable ratchet labor-saving linkage mechanism, an ergonomic handle design and a quick-release safety lock..
  • ♥【Wide Range of Applicable 】This product is suitable for crimping insulated and non-insulated wire ferrule, it can help you to complete wiring quickly, suitable for all kinds of equipment switches, batteries, electronic components connection, etc..
  • ♥【Professional and convenient】This line pressing tool is precise in structure and easy to operate, helping to shorten the working time of electricians, fitters and builders..
Check Stock

Fastronix Top Post Compression Battery Terminal 2 Gauge Negative

  • Top Post Negative Battery Clamp Terminal.
  • Great for Replacing Corroded Battery Ends.
  • Easy Installation with Simple Hand Tools.
Check Stock

Fastronix Top Post Battery Compression Terminal 2 Gauge Positive

  • Top Post Positive Battery Clamp Terminal.
  • Great for Replacing Corroded Battery Ends.
  • Easy Installation with Simple Hand Tools.
Check Stock