ReviewsTerminal Screwdriver

Ogrmar 4 Way Outdoor Waterproof Junction Box IP68 External Underground Electrical Cable Line Power Cord Connector Protection Junction Boxe(M686-4P)

  • Electrical Junction Box:4 wire (4-pole) M20 connector,one input and one output,Cable Range:0.2-0.35in / 0.35-0.47in..
  • High quality: The junction box are all made of durable plastic quality PC housing, it durable for years use,IP68 high level waterproof class ,corrosion resistant, high temperature resistant, long life.The junction box can easily be installed under the ground. Gives you full protection of the cable Line..
  • Easy to install: Small volume,just a screwdriver the Electrical Junction Box can be installed wherever needed and it can used to install outdoor lighting connections, wiring is easy to operate, more convenient and safer..
  • Junction Box Dimensions: 5.44 x 4.34 x 1.4 inches . The Terminal Block Current is 24 A & Terminal Block Voltage is AC 450V ..
  • Widely Usage:This waterproof junction box is widely used in outdoor waterproof facilities, garden lights, buried lights, street lights,outdoor flood lights, and all kinds of LED billboards etc..
Check Stock

Ogrmar 2 Way Outdoor Waterproof Junction Box IP68 External Underground Electrical Cable Line Power Cord Connector Protection Junction Box (M686-2P)

  • Electrical Junction Box:2 wire (2-pole) M20 connector,one input and one output,Cable Range:0.2-0.35in / 0.35-0.47in..
  • High quality: The junction box are all made of durable plastic quality PC housing, it durable for years use,IP68 high level waterproof class ,corrosion resistant, high temperature resistant, long life.The junction box can easily be installed under the ground. Gives you full protection of the cable Line..
  • Easy to install: Small volume,just a screwdriver the Electrical Junction Box can be installed wherever needed and it can used to install outdoor lighting connections, wiring is easy to operate, more convenient and safer..
  • Junction Box Dimensions: 5.44 x 1.68 x 1.4inches . The Terminal Block Current is 24 A & Terminal Block Voltage is AC 450V..
  • Widely Usage:This waterproof junction box is widely used in outdoor waterproof facilities, garden lights, buried lights, street lights,outdoor flood lights, and all kinds of LED billboards etc..
Check Stock

risingsaplings rpi pi GPIO Breakout Board Terminal 0.1\ Block Module for Raspberry Pi 2 3 4 Zero

  • This GPIO extension board is compatible with Raspberry Pi 2 3 4 Zero..
  • Use this module to easily extend the Raspberry pi Zero project to the Internet of Things or industrial control applications..
  • All pins are marked with function names..
Check Stock

Ogrmar 3 Way Outdoor Waterproof Junction Box IP68 External Underground Electrical Cable Line Power Cord Connector Protection Junction Boxes (M686-T)

  • Electrical Junction Box:3 wire (3-pole) M25 connector,one input and one output,Cable Range:0.16-0.31in/0.31-0.47in/0.4-0.55in..
  • High quality: The junction box are all made of durable plastic quality PC housing, it durable for years use,IP68 high level waterproof class ,corrosion resistant, high temperature resistant, long life.The junction box can easily be installed under the ground. Gives you full protection of the cable Line..
  • Easy to install: Small volume,just a screwdriver the Electrical Junction Box can be installed wherever needed and it can used to install outdoor lighting connections, wiring is easy to operate, more convenient and safer..
  • Junction Box Dimensions: 5 x 3.78 x 1.4 inches . The Terminal Block Current is 24 A & Terminal Block Voltage is AC 450V..
  • Widely Usage:This waterproof junction box is widely used in outdoor waterproof facilities, garden lights, buried lights, street lights,outdoor flood lights, and all kinds of LED billboards etc..
Check Stock

Quick Yoga Training - Nintendo DS

  • ...e a faulty 279838 Dryer Heating Element Kit, if your dryer takes too long to dry, no heat or not enough heat, noisy, will not start, will not tumble..
  • ✅【EASY TO INSTALL】-- The dryer heating element 279838 is easy to install. You should prepare useful tools including: screwdriver, a pair of work gloves.Before installing 279838 Dryer heating element,disconnect the power supply to the dryer. Remove back panel of dryer. Locate heating element lower right corner. Remove wires and temp guage from old part and apply to new part. Three screws hold part in place.Install back panel..
Check Stock

risingsaplings 2pcs RPI PI GPIO Expansion Board 2.54mm / 0.1\ Terminal Breakout Board for Raspberry Pi 3 2 Pi Model B+ 4 Zero

  • This GPIO extension board is compatible with Raspberry Pi 2 3 4 Zero..
  • Use this module to easily extend the Raspberry pi Zero project to the Internet of Things or industrial control applications..
  • All pins are marked with function names..
Check Stock

FIRElood Pyrography Wood Burning Kit Professional Wood Burner Tool 30 Woodburning Pen Tips

  • ...styles of high-impedance heating wire tips can be used freely to meet the pyrography needs of beginners and professionals.They can be used to outline, draw, dot, dye, rub, and trace, to help you create rich layers and tones, and bring endless aftertaste to artistic enjoyment.
  • ACCESSORIES YOU NEED: one pen shelf, one screwdriver, wiping sponge, wood chips, one small gourd, and a user manual, which will help you to create your pyrography works. When replacing the pen tip, please use a screwdriver to tighten the screws to avoid poor contact between the pen tip and the terminal.
  • Warm Tip and GOOD CUSTOMER SERVICE: It is recommended to adjust the temperature to the highest when using, the pen tip will heat up in less than a minute, then slowly lower the temperature. This pyrography tool can help cultivate a hobby of pyrography, and can also be given to friends as a gift. If you have any questions or needs, please feel free to contact us.
Check Stock

Beaquicy 279838 W10724237 Dryer Heating Element Assembly Replacement for Whirlpool Ken-more Roper Dryer 3977393 3392519 Dryer Thermal Fuse & 3977767 Dryer Thermostat & 3387134 Cycling Thermostat

  • ...e a faulty 279838 Dryer Heating Element Kit, if your dryer takes too long to dry, no heat or not enough heat, noisy, will not start, will not tumble..
  • ✅【EASY TO INSTALL】-- The dryer heating element 279838 is easy to install. You should prepare useful tools including: screwdriver, a pair of work gloves.Before installing 279838 Dryer heating element,disconnect the power supply to the dryer. Remove back panel of dryer. Locate heating element lower right corner. Remove wires and temp guage from old part and apply to new part. Three screws hold part in place.Install back panel..
Check Stock

FIRElood Pyrography Wood Burning Kit Wood Burner Tool Dual Pen 60W Upgraded Adjustable Pyrography Machine

  • ...nsulating material, and an ergonomic design, making it comfortable to hold. The pens are designed to be used alternately. They are suitable for pyrography on gourds, wooden boards, leather, and rice paper. When replacing the pen nibs, follow the instructions to install the nib correctly and tighten the screw with a screwdriver.
  • 23 DIFFERENT PYROGRAPHY WIRE TIPS: 23 styles of high-impedance heating wire tips can be used freely to meet the pyrography needs of beginners and professionals.They can be used to outline, draw, dot, dye, rub, and trace, to help you create rich layers and tones, and bring endless aftertaste to artistic enjoyment.
  • ACCESSORIES YOU NEED: Professional wood burning kit with various accessories will help you to create your pyrography works. When replacing the pen tip, please use a screwdriver to tighten the screws to avoid poor contact between the pen tip and the terminal.
  • Warm Tip and GOOD CUSTOMER SERVICE: It is recommended to adjust the temperature to the highest when using, the pen tip will heat up in less than a minute, then slowly lower the temperature. This pyrography tool can help cultivate a hobby of pyrography, and can also be given to friends as a gift. If you have any questions or needs, please feel free to contact us.
Check Stock

JRready ST5157 Deutsch Terminal Removal Tool Kit Wire Sizes 4 8 12 14 16 and 20 Gauge & DRK-RT1 Pick Removal Tool for Deutsch Connector

  • Terminal Removal Tool:Compact, easy-to-use, and manufactured of heavy duty plastic to remove contacts without damage to the wire, insulation,....
  • DRK-RT1 Pick Removal Tool :A multi-use tool with a small hook on one end and a small screwdriver on the other.
  • Sturdy Bag:The black canvas bag protects the plastic tools well, compact size and easy to carry.
  • Product Guarantee:100% customer satisfaction is the pursuit of JRready.Any product defects and customer dissatisfaction,JRready promise to return a....
Check Stock

Yale Assure Lock SL with Z-Wave Key-Free Touchscreen Deadbolt Lock only Oil Rubbed Bronze

  • Unlock your door without keys by entering your code on the lock's backlit keypad.
  • Lock the door behind you by pressing any button or by enabling auto....
  • Lock and unlock your door from anywhere by adding the lock to a compatible Z-Wave smart home or alarm system and app (i.e. Samsung SmartThings, Ring....
  • Replaces your existing deadbolt in minutes on standard doors, 1-3/8" to 2-1/4" thick with just a screwdriver. No additional holes needed. Mounting....
  • 9V battery Terminal prevents lock out due to dead batteries. Strike Dimensions-1 1/9 x 2 3/4 inches.
  • Works with Alexa via a compatible hub. Features may vary based on Z-Wave controller. Requires compatible system for smart features.
Check Stock