ReviewsTerminals For Circuit Board

EPLZON L1 Series 30A Circuit Breaker Manual Reset Push Button Circuit Breaker 125/250V AC 50V DC Thermal Overload Protector with Quick Connect Terminals and Waterproof Button Caps (Pack of 2 pcs)

  • ✅ Product Name: Manual Reset Push Button Switch Thermal Circuit Breaker.
  • ✅How it works: This switch can be reset after being disconnected for a period of time, and then press the reset switch again to use it again. When the load exceeds the rated current, the switch reset button will automatically cut off the circuit, thus protecting the circuit..
  • ✅Each package comes with quick connect terminals and the circuit breaker comes with a waterproof button cap. A circuit breaker with a waterproof button cap protects against bad weather. The compact design enables high-density circuit protection configurations..
  • ✅Package List: 2 * Button Type Thermal Circuit Breakers + 2 * Hex Nuts + 2 * Gaskets + 2 * Waterproof Button Caps + 4 * 6.3MM Female Spade Terminals + 4 * 6.3MM Insulation Sleeves.
  • ✅Widely used in household and commercial appliances, small generators, air compressors, automobiles, electric vehicles, power tools, extension cords, industry, transportation, ships, communications, power panels, audio-visual, medical, power supplies, etc..
Check Stock

XYGStudy for Raspberry Pi 4B/3B+/3B/2B/B+/A+ Jetson Nano High-Precision AD/DA Expansion Board Sheild Onboard ADS1256 DAC8552 ADC DAC Jumper

  • There’s no AD/DA function on the Raspberry Pi GPIO interface, this may trouble you in the Pi development. However, it won’t be a problem anymore. The High-Precision AD/DA Board allows you to add high-precision AD/DA functions to the Raspberry Pi..
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano.
  • Onboard ADS1256, 8ch 24bit high-precision ADC (4ch differential input), 30ksps sampling rate. Onboard DAC8552, 2ch 16bit high-precision DAC.
  • Onboard input interface via pinheaders, for connecting analog signal. Onboard input/output interface via screw terminals, for connecting analog/digital signal. Features AD/DA detect circuit, easy for signal demonstration.
Check Stock

ALITOVE 16.4ft 5050 Blue LED Flexible Strip Ribbon Light Black PCB DC 12V 5M 300 LEDs Waterproof IP65 for Home Garden Commercial Area Lighting, Without Power Supply

  • ...end it to right or acute angle, otherwise the circuit board and silicone coating will crack. The strip lights can be cut between every 3 LEDs along along the cutting marks to fit for your project, great for DIY..
  • 【Two different power input ends】One end has 2pin wire, you can screw it to the positive and negative terminals of 12V power supply. The other end has 5.5x2.1mm female DC connector. If your 12V power supply has 5.5x2.1mm male DC connector, just plug and work. The power supply is not included..
  • 【Indoor and Outdoor Use】The LED strip is coated with clear silicone, up to IP65 waterproof rate. It can be used to beautify both indoor and outdoor lighting scenes, such as backyard, deck, boat, living room, bedroom, kitchen, ceiling, stairs etc. 24 months free warranty. We always stand behind our products..
Check Stock

Ethernet SmoothStepper Motion Control Board with Smooth Stepper Terminal Board

  • 6 Axis Ethernet SmoothStepper Motion Control Board with Terminals control board.
  • Ethernet SmoothStepper Motion Control Board with Terminals.
Check Stock

Minn Kota Trolling Motor Power Center

  • This battery box / power center contains easy access external battery terminals that allow trolling motor leads and charger leads to be connected to the battery posts without opening the box.
  • Protects your battery (not included) on a small boat, transom application (boats that do not have battery compartments).
  • Built-in, push button battery meter with 4 LEDs displays current “state of charge”.
  • 60A resettable circuit breaker connected to top.
  • 10A resettable circuit breaker connected to two accessory ports.
  • Ring terminals on inside battery connectors.
  • Compatible with group 24 and 27 size batteries.
  • Overall dimensions: 7" x 13.5" wide x 12" tall.
Check Stock

NVX VAD11005 1100W Full Range Class D 5-Channel Car/Marine/Powersports Amplifier with Bass Remote

  • RMS POWER: 【4 ohms: 80W x 4 chan. + 350W x 1 chan.】 【2 ohms: 125W x 4 chan. + 600 x 1 chan.】 【4 ohms bridged: 250W x 2 chan.】.
  • BASS REMOTE: Variable Bass Boost 0 - +18 dB @ 45 Hz. Easily adjust with the included bass remote..
  • MARINE CERTIFIED: Our VAD line includes a conformally coated, marine grade circuit board. This allows this amplifier to be installed in nearly any application..
  • FEATURES: LED indicator lighting | 3-way protection circuitry | Heavy duty aluminum alloy heat-sink | Platinum-plated RCA level inputs | Platinum-plated screw terminals.
Check Stock

3D Printer MKS Gen-L V1.0 Controller Board MKS Integrated Mainboard Motherboard Compatible with Ramps1.4 Supports TMC2100 A4988 8825 Driver LCD2004 LCD12864 TFT28 TFT32

  • 2560 and Ramps 1.4 are integrated in the board, which avoids the problem of complicated connectors and malfunctioning. Reserve external driver signal,....
  • Use specific power chip, support 12V-24V power input, and resolve the problems of chip heating and power shortage. Use high-quality MOSFET, better....
  • Use CH340 serial port chip, more easily install the drive than 16U2. Stable and reliable filter circuit greatly reduces interference and avoids....
  • Run Marlin firmware, the configuration is completely same as Ramps 1.4, and available to directly replace the Ramps 1.4. Support Ramps 1.4,....
  • Plug the stepper drivers according to the different color terminals which decreases the probability of reverse and prevents the controller board....
Check Stock

LEFELWEL Upgrade M365 Pro Dashboard Cover Replacement Circuit Board for Original Xiaomi M365 /M365 Pro Electric Scooter Parts Accessories

  • 【Compatible with Two Models】 The newest model of Circuit Board has a screen cover design that is fit for Xiaomi Mijia M365 and Xiaomi M365 Pro electric scooter. The Circuit Board is a replacement of Xiaomi M365/M365 Pro Electric Scooter..
  • 【Upgrad Model of Circuit Board】 This is the newest model of Circuit Board with a screen cover, designed for Xiaomi Mijia M365 and Xiaomi M365 Pro electric scooter. No need to do any firmware upgrade after you replace the Circuit Board..
  • 【High Quality and Durable】 The M365 Pro dashboard is made of high quality metals and PCA materials，fully compatible with xiaomi m365 and pro scooter accessories.
  • 【Functional Appearance】 The newest model of Xiaomi M365 / M365 Pro circuit board has a cool, clear display dashboard that shows all the functionality and speeds. This product is perfect to work with the electric scooters. Economically practical with more safety and convenience..
  • 【Packing list】 1 Circuit board for M365/Pro Scooter, 1 replacement cover ,1 tool and screw,.
Check Stock

Reese Towpower 78118 Professional Wiring Adapter 7-Way Blade to 4- or 5-Way Flat LED Circuit Tester,Regular

  • VEHICLE-TO-TRAILER WIRING: Adapts any popular vehicle wiring system to your trailer, converting an OEM 7-way blade connector to a standard 4- or 5-way....
  • BUILT-IN LED TESTER: Circuit tester instantly checks electrical circuit for connectivity and displays the status using high-visibility cool blue LEDs....
  • DURABLE CONSTRUCTION: The REESE Towpower Professional Writing Adapter is built with long-lasting corrosion-resistant terminals and tin-plated....
  • ATTACHED DUST-COVER: Tethered dual-use dust cover keeps terminals clean and protected when not in use towing a trailer..
Check Stock

Alphasonik V1200.5 Venum Series 2400 Watts Max 5-Channel Car Amp with Power Plant Chip 4-Way Protection Circuitry Multi-Channel Bridgeable Class A/B Amp with Remote Bass Boost Control Knob Include

  • This listing contains: (1) V1200.5 2400 Watt 5 Channel Class A/B Amplifier (1) Remote Bass Knob with Connector cable.
  • 4 x 75W + 1 x 300W @ 4 Ohms 4 x 150W + 1 x 600W @ 2 Ohms 2 x 300W + 1 x 300W @ 4 Ohm N/A + 1 x 600 @ 2 Ohm.
  • Features: Nickel Plated Terminals Low Level Inputs Remote Bass Knob Included Mil Spec Double-Sided Glass Epoxy FR Circuit Board 4-Way Protection Circuitry: Thermal, Short Circuit, Overload and DC Offset Variable Low-Pass Crossover: 50Hz - 250Hz Variable Input Sensitivity: 200mV - 6V Phase Control: 0 - 180 Degree 45Hz Bass Boost: 0 - 12dB S/N Ratio: > 85dB THD: 0.08%.
  • Product Dimensions: 9.2" x 2.3" x 18.3" (233 x 59 x 465mm).
Check Stock

Alphasonik NA1600.2 Neuron Series 1600 Watts Max 2-Channel Car Amp with 4-Way Protection Circuitry Multi-Channel Bridgeable Class A/B Amplifier Low & High Level Inputs Remote Bass Knob Included

  • This listing contains: (1) NA1600.2 1600 Watt Max 2-Channel Class A/B Amplifier Bridgable (1) Remote Bass Knob with Connector cable (1) Operations Manual (1) Mounting Hardware Set.
  • 2 x 400W @ 4 Ohms 2 x 800W @ 2 Ohms 1 x 1600W @ 4 Ohm.
  • Features: Nickel Plated Terminals Extruded Aluminum Heat Sink Low Level Input High Level Input Low Level Output Remote Bass Knob Included Mil Spec Double-Sided Glass Epoxy Circuit Board 4-Way Protection Circuitry: Thermal, Short Circuit, Overload and DC Offset Variable Low-Pass Crossover: 50Hz - 250Hz High-Pass Crossover: 60Hz - 1.2kHz Variable Input Sensitivity: 200mV - 6V 45Hz Bass Boost: 0 - 12dB ATC Fuse: 25 Amp x 2.
  • Product Dimensions: 7.01" x 2.09" x 10.24" (178 x 53 x 260mm).
Check Stock