ReviewsTest Automation Process

ATO EMI Power Line Filter 6A/50A/100A, 3 Phase, Noise Suppressor Power EMI Filter (50A)

  • The equipment of laboratory, Communication transmission system equipment, Uninterruptible Power Supply, Medical equipment, Servo frequency control equipment, Automation equipment,Precision machinery.
  • Hi-pot Test,1450VDC 2sec (L to N) ,1450VDC 2sec (L to N) ,1500VAC 2sec (L/N to G),Working Temperature 25/85/21 (-25¡ãC to +85¡ãC).
  • Product size£º44X50x28.5mm,Net Weight: 150G.
  • Rated Voltage 125/250VAC,Operation Frequency 50/60Hz,Rated Current 1-6A.
  • Notice: The filter must be connect the ground wires ,otherwise, the effect shall be reduced by 50%..
Check Stock

MEANLIN MEASURE 0-60Psi 1/4 NPT Digital Pressure Gauge with Rubber Protective Cover，Lower Mount，Accuracy 1%，Resolution 0.1psi

  • 【Pressure Range】①0-60PSI ② 0-4Bar③0-4Kgf /cm²④ 0-413KPA【Operating Temperature】32℉- 113℉.
  • ✔Backlit LCD screen meets the needs of night work..
  • ✔Rubber protective sleeve improves safety and reduces the damage rate caused by accidental drops..
  • ✔Energy-saving and power-saving. After measurement, the screen will dim after 15 seconds, and it will automatically shut down after 90 seconds..
  • 【Applicable】Vehicle tires (truck, car, motorcycle, etc.), automation equipment, gas pressure test..
Check Stock

Minoston Z-Wave Door Sensor Window Sensor Temperature and Humidity Sensor, Z-Wave 3 in 1 Sensor, Battery Powered, 700 Series, Z-Wave Hub Required, Alexa and Google Assistant Compatible(MSE30Z)

  • COMPATIBILITY: The Ecolink Door/Window is manufacturer tested to be compatible with the following ZWAVE Plus Home Automation HUBs or controllers: Samsung SmartThings Certified, V1, V2, V3. Vera Plus, Vera Edge, Vera Lite. Homeseer. Dlink staples connect. While it may work with your ZWAVE hub, Ecolink cannot guarantee it..
  • SIMPLE TO INSTALL: Easy installation by simply pulling the battery Tab to begin the Learning process. Natively compatible with SmartThings, it works with most brands of ZWAVE home security hubs. Features industry leading rare earth magnets that allow for up to a 5/8 inch sensor to magnet gap. Perfect for most door or window applications..
  • WHITE or BROWN housings INCLUDED: Both White or Brown plastic housing choice included to match any décor..
  • 3 YEARS BATTERY LIFE: Tamper sensing Premium design outlasts the competition and boasts a battery Life of up to 3 years..
  • Ecolink is a leading developer of low power, highly reliable wireless solutions, including a wide range of intelligent wireless security, sensing or home automation devices..
Check Stock

Chengliang Power Supplys 24v 15a Dc 360w Original Ender 3 3D Printer Switching PSU

  • 24v creality ender 3 3d printer original power supply 24 volt adapter Universal Regulated output 24v 15a 360w.
  • Input voltage ac 115/230v by switch range 100-130/200-264 vac convert ac 115/230v to dc 24v 15a 360w.
  • Efficiency over 86% for 3d printer CCTV monitor led light strip industrial automation communication.
  • Smart full protections SCP OVP UVP OPP OCP OTP auto on/off cooling fan power on auto works Noise≤35dB.
  • You get one original ender 3 printer power supply CL-P360W24V-D warranty 3 years 24hrs online service.
  • Withstand 300V AC surge input for 7 seconds.
Check Stock

Noise Suppressor Power EMI Filter Termianl Single-Phase Line-Conditioner JREle AC 115/250V 6A JRW1206-11

  • The equipment of laboratory, Communication transmission system equipment, Uninterruptible Power Supply, Medical equipment, Servo frequency control equipment, Automation equipment,Precision machinery.
  • Hi-pot Test,1450VDC 2sec (L to N) ,1450VDC 2sec (L to N) ,1500VAC 2sec (L/N to G),Working Temperature 25/85/21 (-25¡ãC to +85¡ãC).
  • Product size£º44X50x28.5mm,Net Weight: 150G.
  • Rated Voltage 125/250VAC,Operation Frequency 50/60Hz,Rated Current 1-6A.
  • Notice: The filter must be connect the ground wires ,otherwise, the effect shall be reduced by 50%..
Check Stock

ASEMI 10Pcs MBR30100CT Schottky Barrier Diode TO-220AB Package 30A100V for DVR

  • 【Type No.】: MBR30100CT schottky diode,other models in the same series are MBR30200CT/MBR30150CT/MBR3060CT, etc..
  • 【Chip】: High-quality large chip, high-precision integrated test line to monitor electrical parameters..
  • 【Features】: Laser printing is not easy to fade, oxygen-free copper pins have good conductivity..
  • 【Package】: 10pcs packed by exquisite environmentally friendly boxes or bags, which can reduce damage during transportation..
  • 【Applications】: Switching power supply, LED lights, integrated circuit, mobile communications, computers, industrial automation control equipment, automotive electronics , LCD television, IoT , smart home , medical equipment , cooker and other small appliances..
Check Stock

Noise Suppressor Power EMI Filter Termianl Single-Phase Line-Conditioner JREle AC 115/250V 20A JRW1220-22

  • The equipment of laboratory, Communication transmission system equipment, Uninterruptible Power Supply, Medical equipment, Servo frequency control equipment, Automation equipment,Precision machinery.
  • Hi-pot Test,1450VDC 2sec (L to N) ,1450VDC 2sec (L to N) ,1500VAC 2sec (L/N to G),Working Temperature 25/85/21 (-25¡ãC to +85¡ãC).
  • Product size£º84.5X55.74X43mm,Net Weight: 370G.
  • Rated Voltage 125/250VAC,Operation Frequency 50/60Hz,Rated Current 1-20A.
  • Notice: The filter must be connect the ground wires ,otherwise, the effect shall be reduced by 50%..
Check Stock

Chengliang Power Supply Dc 24v 17a 400w Original Ender 3 3D Printer Switching PSU UL Certified

  • 24v power supply 24 v regulated universal 24 volt adapter output 24 vdc 17a 400w certified DK-87763-UL.
  • Power supplies input voltage 100-120/200-240vac by switch convert ac 100-120v/200-240v to dc 24v 17a 400w.
  • Efficiency over 86% for 3d printer CCTV monitoring led light strip industrial automation communication.
  • Smart full protections SCP OVP UVP OPP OCP OTP auto on/off cooling fan power on auto works Noise≤35dB.
  • You get one original ender 3d printer power supply CL-P400W24V-D warranty 3 years 24hrs online service.
  • Withstand 300V AC surge input for 5 seconds.
Check Stock

Noise Suppressor Power EMI Filter Termianl Single-Phase Line-Conditioner JREle AC 115/250V 6A JR-M006-A

  • The equipment of laboratory, Communication transmission system equipment, Uninterruptible Power Supply, Medical equipment, Servo frequency control equipment, Automation equipment,Precision machinery.
  • Hi-pot Test,1450VDC 2sec (L to N) ,1450VDC 2sec (L to N) ,1500VAC 2sec (L/N to G),Working Temperature 25/85/21 (-25¡ãC to +85¡ãC).
  • Product size£º 40x44X22mm,Net Weight: 42G.
  • Rated Voltage 125/250VAC,Operation Frequency 50/60Hz,Rated Current 1-6A.
  • Notice: The filter must be connect the ground wires ,otherwise, the effect shall be reduced by 50%..
Check Stock

Chengliang Power Supplys 24v 15a 360w Dc Original Ender 3 Pro 3D Printer Switching Power Supply

  • Original creality ender 3 ender 6 3d printer power supplies 24v universal regulated output dc 24v 15a 360w 24 volt adapter.
  • Input voltage 115/230v by switch range 90-132/180-264 vac convert ac 115/230v to dc 24v 15a 360w.
  • Efficiency over 86% for 3d printer CCTV monitor led light strip industrial automation communication.
  • Smart full protections SCP OVP UVP OPP OCP OTP auto on/off cooling fan power on auto works Noise≤35dB.
  • You get one original ender 3 printer power supply CL-C360W24V-N warranty 3 years 24hrs online service.
  • Withstand 300V AC surge input for 5 seconds.
Check Stock

Noise Suppressor Power EMI Filter Termianl Single-Phase Line-Conditioner JREle AC 115/250V 6A JR-L006-N

  • The equipment of laboratory, Communication transmission system equipment, Uninterruptible Power Supply, Medical equipment, Servo frequency control equipment, Automation equipment,Precision machinery.
  • Hi-pot Test,1450VDC 2sec (L to N) ,1450VDC 2sec (L to N) ,1500VAC 2sec (L/N to G),Working Temperature 25/85/21 (-25¡ãC to +85¡ãC).
  • Product size£º54.5X25X18.1mm,Net Weight: 30G.
  • Rated Voltage 125/250VAC,Operation Frequency 50/60Hz,Rated Current 1-6A.
  • Notice: The filter must be connect the ground wires ,otherwise, the effect shall be reduced by 50%..
Check Stock