ReviewsTft Lcd Touch Screen

Handheld Multi-Channel Temperature Meter with LCD Display Touch Screen 8 Channels Portable Thermometer Thermocouple Temperature Meter

★ TFT-LCD True-color LCD display, touch screen.
★ Cold Junction Compensation, Mini-USB interface.
★ The function of broken thermocouple checking.

Check Stock

Ickiya MKS Gen L V2.1 3D Printer Control Board Motherboard, Open Source Marlin Support TMC2209/TMC2208/TMC2208/TFT35 V3.0/TFT35 E3/BL TOUCH/LCD12684 for Ramps 1.4 /Ramps 1.5/Ramps 1.6 3D Printer

✅Integrate 2560 and ramps1.4 are intergrated on a piece of board, which solves the problem of complicated and easy failure for Ramps1.4 composite interface.Users can change their own motor drive, support A4988/TMC2209/TMC2208/TMC5160/DRV8825 stepper drivers.
✅Using CH340 serial chip to ensure the stable and reliable premise, reduce the cost, and to solve the problem of the previous 16U2 hard drive.Using the open source firmware for Marlin, the configuration is exactly the same as for ramps1.4, and can replace for Ramps1.4 directly..
✅24V input can be accepted, and the same system power can reduce the hot bed current to 1/4, effectively solving the hot bed MOS tube heating problem..
✅It can be directly connected to 2004LCD display and 12864LCD display, and can be supported by TFT28 /TFT32/TFT35/TFT50/TFT70 touch screen..
✅The XYZ axis adopts the terminals of different colors to correspond to the motor and the limit switch, and the connection is convenient,reduces the probability of inserting and reversing, and prevents the main board from being damage by the oppsite inserted of the drive..

Check Stock

LCD Touch Panels Touchpanel Analog For DOGS102 (EA TOUCH102-1)

2.8 inch TFT LCD color screen, support 65K color display, and the display is colorful, high quality image display and wide viewing angle..
With PCB board (including power supply IC, touch IC, SD card cage) compatible 5110 interface. At least 4 IO driver are needed (without touch) , at least 9 IO driver are needed( with touch)..
This 2.8-inch LCD module uses ILI9341 drive chip to drive 240*320 dot , with 240*320 resolution..
On-board level translation programs truly perfectly compatible 5V / 3.3V IO level, supports a variety of single-chip IO connection, professional and practical..
We strive to provide you with the highest quality product and the best customer experience, if you're not entirely satisfied, please just feel free to contact us at any time..

Check Stock

5’’ Inch TFT LCD Car Color Rear View Monitor Screen for Parking Rear View Backup Camera with 2 Optional Bracket(Suckers Mount and Normal Adhesive Stand), Camera not Included, Monitor Only

5” Inch Digital TFT LCD Color Monitor Screen for Car Rear View Parking Backup Camera, Camera not included, Monitor Only.
Anti-glare High Resolution,800(RGB)X480, 5-inch TFT LCD screen with excellent color.
Working perfectly with Car DVD, VCD, camera, STB, satellite receiver, and other video equipment.
Perfect companion product for a Chuanganzhuo’s backup camera,Automatically starts when the car back up, video opened at the same time.
Package content:1 x 5″ TFT LCD Monitor.

Check Stock

Monland 880 3D Printer MKS Gen-L V1.0 Controller Board 1Pas MKS Integrated Mainboard Motherboard Compatible with Ramps1.4

2560 and ramps1.4 are intergrated on a piece of board, which solves the problem of complicated and easy failure for Ramps1.4 composite interface.Users....
Using CH340 serial chip to ensure the stable and reliable premise, reduce the cost, and to solve the problem of the previous 16U2 hard drive.Using the....
24V input can be accepted, and the same system power can reduce the hot bed current to 1/4, effectively solving the hot bed MOS tube heating problem..
It can be directly connected to 2004LCD display and 12864LCD display, and can be supported by TFT28 and TFT32 touch screen..
The XYZ axis adopts the terminals of different colors to correspond to the motor and the limit switch, and the connection is convenient,reduces the....

Check Stock

Haosegd 3D Printer 32-bit V4.2.7 Silent Motherboard 24 V Input Mainboard for 3D Printer Creality Ender-3/3 pro Ender V2/Ender 5 Aluminum Low Consumption 4.01 x 2.81 in 12V Output

【TFT35 E3 V3.0】 ARM Cortex-M3 series STM32F207VCT6 chip with 32-bit CPU 120MHz.
Upgrade the firmware by SD card. It is easy and convenient to....
【SKR Mini E3 V2.0】 ARM Cortex-M3 Series STM32F103RCT6 Master Controller with 32-bit Main Frequency of 72MHz Chip.
【TFT35 E3 V3.0】 This display board has higher compatibility. Users can select two work modes:UART serial port screen mode and 12864 screen....
【TFT35 E3 V3.0】 LCD12864 mode uses EXP1, EXP2 and EXP3. EXP1 and EXP2 are LCD screen ports of normal motherboard. EXP3 is the LCD interface used....
【After-sales Support】If you encounter any problems, please write us via Amazon as soon as possible. We have professional technical after-sales....

Check Stock

ZHONGJI Touch Full Flat Screen PC Retail Point of Sale System Cash Register with Installed Thermal Receipt Printer, Cash Box for SMEs,Restaurant and Bars

【NOTICE BOARD】:We only installed the not activated windows 10 pro version and not activated pos software.
【POS SYSTEM 】 : Intel Celeron K1900 Dual Core 2.4GHz / 64G SSD / 4GB RAM / 15” 5-Wire Resistive TFT LCD Touch Screen（Main Display）/ 15'' TFT LCD(Customer Display)..
【PROFESSIONAL THERMAL PRINTER】: 80mm Thermal Receipt Printer , Auto Full or Half Cut, Support logo printing.
【STELL HEAVY DUTY RJ45 CASH DRAWER】 :Spring-loaded steel bill clips,5-coin compartments,3-position lock,RJ11 Crystal phone jack, quality guaranteed steel..
【EXTRA BONUS FREE OF CHARGE 】: life long after sale service, High quality cash register thermal paper X 10 Rolls, Keyboard X 1 Piece, Mouse X 1 Piece..

Check Stock

HiLetgo 3.5\ TFT LCD Display ILI9486/ILI9488 480x320 36 Pins for Arduino Mega2560

3.5" TFT LCD Display ILI9486/ILI9488 480x320 Suitable for MEGA2560.
Support Arduino Mega2560 Directly inserted.
OnBorad level conversion chip for 5V/3.3V MCU.
Compatible with 3.3/5V operation voltage level.
Compatible with Arduino-Series development Board. (Please notice:This Screen is not touch screen).

Check Stock

Naxa Electronics NAXA NT-90 9 Portable TV & Digital Multimedia Player

Enjoy TV broadcasts (ATSC/NTSC tuner) Additional external antenna for enhanced Play multimedia files from USB and SD memory cards TV reception.
Digital multimedia support: JPG, MP3, MPEG2, MPEG2_HD, MPEG4, MPEG4_SD, MPEG4_HD, H.264, FLV.
3-way power: AC power adapter, DC car adapter, and rechargeable battery Two A/V input connectors and external antenna.
Headphone jack (3.5 mm) and built-in stereo speakers Screen Type: 9" TFT LCD (800 x 480) Removable Memory Support: USB, SD.

Check Stock

BIGTREETECH SKR Mini E3 V3.0 Control Board Integrated TMC2209 UART Stepper Driver Supports Marlin/Klipper Compatible Ender 3/Ender 3 Pro/Ender 3 V2 3D Printer Motherboard ZZB000590 Black

⭐【Main Control Chip】BIGTREETECH SKR Mini E3 V3.0 control board adoptes the G0 series MCU-STM32G0B1RET6 or STM32G0B0RET6 ARM Coretex. integrated TMC2209 Silent stepper motor drive,Support runing Klipper&Marlin..
⭐【Heat Sink Design Upgrade】New upgraded to integrated large stepping motor driver aluminum heat sink,strengthen the drive heat dissipation capacity, and greatly improve the motherboardc heat dissipation performance..
⭐【Multiple Functions】It Supports BLTouch, RGB lights,Filament detection, Automatic shutdown,power-off reesume, Display supports TFT35 E3 V3.0.1/TFT35 V3.0.1/TFT28/TFT43/TFT50/TFT70 V3.0 touch screen as well as original 12864 LCD of Ender 3 printer..
⭐【Fan Upgraded】Increase Three CNC heat dissipation controllable fan interface to reduce the printer temperature when the device is working..
⭐【Multiple Compatibile】BIGTREETECH SKR MINI E3 V3.0 Control board is design for Ender 3,plug and play,compatible with Ender V2 Ender 3/ende 3 pro/ender 5/ender 5 pro/CR-10 3D printer, the firmware is pre-install well before we ship out, you can select the firmware base on your needs..

Check Stock

DIYmalls 3.2 inch TFT Shield LCD Display Module 400x240 ILI9327 Resistive Touch Screen 5V onboard Temperature Sensor for Arduino UNO R3 Mega 2560

This 3.2 tft lcd display has 32 pin interface onboard, so connecting with uno r3 and mega 2560 is easy..
Onboard SD card slot help to use 3.2 inch touch screen more conveniently..
You will receive 1pcs resistive touch screen and 1pcs touch pen..
If you have any problem, please contact seller as follow: click "DIYmalls"(you can find "Sold by DIYmalls" under Buy Now button), in the new page,....

Check Stock