ReviewsTft Screen Display

Screen Replacement for Samsung Galaxy J7 2016 J710 J710F J710M/H TFT LCD Touch Screen Digitizer Glass Assembly Not Original AMOLED Gold

  • Note pls:This is TFT LCD Display compatible for original AMOLED screen, this LCD is not original, but can compatible For Samsung Galaxy J7 2016....
  • [Strictly quality control]All the screens are 100% tested with original machine before shipping, make sure no scratch and dead area in LCD. Pls....
  • [LCD Screen Replacement For Samsung Galaxy J7 2016 ] This screen replacement For Samsung Galaxy J7 2016 LCD Screen is Not Original AMOLED, it's TFT....
  • [Package Contains]1 X LCD Screen Assembly ,1 X Glue Tape,1 X Repair Tools,1x opening card, 1x tempered glass film, more easy for installing with tools....
  • [After-sale Service]we guarantee 6 months for our products,if there are any non-human factor quality problem,please contact us in 12 months! we....
Check Stock

Haosegd 3D Printer 32-bit V4.2.7 Silent Motherboard 24 V Input Mainboard for 3D Printer Creality Ender-3/3 pro Ender V2/Ender 5 Aluminum Low Consumption 4.01 x 2.81 in 12V Output

  • 【TFT35 E3 V3.0】 ARM Cortex-M3 series STM32F207VCT6 chip with 32-bit CPU 120MHz.
  • Upgrade the firmware by SD card. It is easy and convenient to....
  • 【SKR Mini E3 V2.0】 ARM Cortex-M3 Series STM32F103RCT6 Master Controller with 32-bit Main Frequency of 72MHz Chip.
  • 【TFT35 E3 V3.0】 This display board has higher compatibility. Users can select two work modes:UART serial port screen mode and 12864 screen....
  • 【TFT35 E3 V3.0】 LCD12864 mode uses EXP1, EXP2 and EXP3. EXP1 and EXP2 are LCD screen ports of normal motherboard. EXP3 is the LCD interface used....
  • 【After-sales Support】If you encounter any problems, please write us via Amazon as soon as possible. We have professional technical after-sales....
Check Stock

MJKJ Handheld Game Console ,Retro Game Console 4.3 Inch 3000 Classic Games Pap-KIII Portable Game Console Support GBA / GBC / GB / SEGA / NES / SFC / NEOGEO - Black

  • Handheld Game Console : Built in 3000 retro games , 16GB 64bit operate system , Support NEOGEO / CPS / GBA / GBC / GB / SFC / SEGA / GG / SMS / NES ,....
  • MP3 player / Camera / Picture browse / Ebook / Recorder funcation，can connect to TV play.
  • 4.3 Inch TFT Screen: Clear full color TFT screen with display scale of 16:9. Just fine in kid's palm, lightest portable game console kept in pocket.....
  • TV-Output : Support 720P TV-OUT video output , can play games , watch movies on TV ..
  • If You Find The Bubbles Or Scratches On The Screen After Receving The Retro Game，Just Tear Of The Screen Protection Film..
Check Stock

Ili9341 LCD Display Module, ILI9341 5V/3.3V 2.8\ TFT SPI Serial Port LCD Touch Panel Display Module, 240x320[with Touch(9 IO Drive)](Without Touch)

  • With PCB board (including power supply IC, touch IC, SD card cage) compatible 5110 interface. At least 4 IO driver are needed (without touch) , at least 9 IO driver are needed( with touch). 2.8 inch TFT LCD color screen, support 65K color display, and the display is colorful, high quality image display and wide viewing angle..
  • This 2.8-inch LCD module uses ILI9341 drive chip to drive 240*320 dot , with 240*320 resolution..
  • On-board level translation programs truly perfectly compatible 5V / 3.3V IO level, supports a variety of single-chip IO connection, professional and practical..
  • We strive to provide you with the highest quality product and the best customer experience, if you're not entirely satisfied, please just feel free to contact us at any time..
  • Buy it Confidence: Let you feel safe using, so you have a better using experience. Great value for money. If you have any problems, please fell free to contact us anytime. Our team w....
Check Stock

EBIKELING 24V/36V/48V/52V Waterproof TFT 750C - LCD Display Speedometer Control Panel - Odometer for Electric Bicycle ebike

  • The waterproof TFT 750C LCD display offers much more than a digital screen and fancy look, it allows users to edit controller parameters, control all functions on your ebike from speed to wheel size..
  • This intelligent designed ebikes accessory with Simple operation for any men or women to track their outdoor riding needs such as cycling distance, remaining battery level, current speed (mph-kmh), average speed, maximum speed, total and single trip distances..
  • Numbers are big enough to ensure readability while riding in all conditions. With the colorful backlight LCD, provide your high visible statistics during day and night..
  • EBIKELING 24V/36V/48V/52V Waterproof TFT 750C - LCD Display keeps moving in worst weather thanks to its full-sealed design. Waterproof body allows the bike computer to stay with you in any environment or weather. The body is fully sealed, to make sure no water can get in by any means..
  • High-contrast 3.2inch IPS colorful matrix screen. Ergonomic external button design, easy to operate. The large buttons allows you to select the desired mode. This makes the EBIKELING LCD Display a very simple and attractive..
Check Stock

MJKJ Handheld Game Console , Portable Game Console 4.3 Inch 3000 Classic Retro Game Console Pap-KIII , Support GBA / GBC / GB / SEGA / NES / SFC / NEOGEO - Black

  • Handheld Game Console : Built in 3000 retro games , 16GB 64bit operate system , Support NEOGEO / CPS / GBA / GBC / GB / SFC / SEGA / GG / SMS / NES , you also can download games with related format.
  • MP3 player / Camera / Picture browse / Ebook / Recorder funcationcan connect to TV play.
  • 4.3 Inch TFT Screen: Clear full color TFT screen with display scale of 16:9. Just fine in kid's palm, lightest portable game console kept in pocket. Let you enjoy the best visual experience..
  • TV-Output : Support 720P TV-OUT video output , can play games on TV ..
  • If You Find The Bubbles Or Scratches On The Screen After Receving The Retro GameJust Tear Of The Screen Protection Film..
Check Stock

Ickiya MKS Gen L V2.1 3D Printer Control Board Motherboard, Open Source Marlin Support TMC2209/TMC2208/TMC2208/TFT35 V3.0/TFT35 E3/BL TOUCH/LCD12684 for Ramps 1.4 /Ramps 1.5/Ramps 1.6 3D Printer

  • ✅Integrate 2560 and ramps1.4 are intergrated on a piece of board, which solves the problem of complicated and easy failure for Ramps1.4 composite interface.Users can change their own motor drive, support A4988/TMC2209/TMC2208/TMC5160/DRV8825 stepper drivers.
  • ✅Using CH340 serial chip to ensure the stable and reliable premise, reduce the cost, and to solve the problem of the previous 16U2 hard drive.Using the open source firmware for Marlin, the configuration is exactly the same as for ramps1.4, and can replace for Ramps1.4 directly..
  • ✅24V input can be accepted, and the same system power can reduce the hot bed current to 1/4, effectively solving the hot bed MOS tube heating problem..
  • ✅It can be directly connected to 2004LCD display and 12864LCD display, and can be supported by TFT28 /TFT32/TFT35/TFT50/TFT70 touch screen..
  • ✅The XYZ axis adopts the terminals of different colors to correspond to the motor and the limit switch, and the connection is convenient,reduces the probability of inserting and reversing, and prevents the main board from being damage by the oppsite inserted of the drive..
Check Stock

for Samsung J700 LCD Screen Replacement-SRJTEK Screen Replacement for Samsung Galaxy J7 2015 J700 J700T J700F J700H J700M SM-J700 LCD Touch Screen Digitizer Glass Display Assembly Parts (White)

  • ★Note ----- This is TFT LCD Display compatible for original AMOLED screen, this LCD is not original, but can compatible for Samsung Galaxy J7 2015 perfect .it is the most COST-EFFECTIVE Screen replacement for sm-J700. of course the display effect is less than AMOLED ,if your need original display effect, we suggest buy a original lcd instead of this TFT LCD.
  • ★Compatible ----- Only for Samsung Galaxy J7 2015 (model:J700 J700H J700M J700DS J700F J700T J700P) LCD Screen is brand new and original quality, repairing your broken or malfunctioning screen,Compatible with Samsung Galaxy J700, perfect fit for your phone, work as original!.
  • ★Strict Quality Control ----- All products have passed strictly QC double tested and 100% in good condition before shipment.Make sure no scratch/no dead area/ no dot pixel or line in the screen .We refuse any flaw,provide A+ quality products only..
  • ★Installation recommendations ----- The lcd screen replacement is easy to install, but it require the flex cable connect to the motherboard exact right ,so We highly recommend professional installation - parts damaged during installation are not accepted for return..
  • ★Value for Money ----- High quality replacement scree,free tempered glass and free repair tools.Saves you tim....
Check Stock

Dell 1908FP UltraSharp Black 19-inch Flat Panel Monitor 1280x1024 with Height Adjustable Stand

  • The Dell 1908FP-BLK flat panel display has an active matrix, thin-film transistor (TFT), liquid crystal display (LCD)..
  • The monitor features include: 19-inch (481.9 mm) viewable area display (measured diagonally). 1280 x 1024 resolution, plus full-screen support for lower resolutions..
  • 1280 x 1024 resolution, plus full-screen support for lower resolutions..
  • Tilt, swivel, vertical extension and rotate adjustment capabilities..
  • Plug and play capability if supported by your system..
Check Stock

1.44Inch TFT Display Module LCD Display Screen 128RGB x 128 Resolution Serial Peripheral Interface

  • The display module is connected with other board via a serial peripheral interface. It is designed with one socket for sd card which makes it very convenient..
  • The display model is a-TFT with a display size of 1.4in with the high quality driving IC chip ST7735S, the module works more stable..
  • The lcd display screen is graphical 128RGBx128 dot . The LCD effective area is 25.5x26.5mm and the size of each pixel is 0.20x0.20..
  • The lcd display screen is ideal for clear presentation of texts, graphics and images, with a large 1.8 inch sized screen and integrated SD card reader..
  • We strive to provide you with the highest quality product and the best customer experience, if you're not entirely satisfied, please just feel free to contact us at any time..
Check Stock

BIGTREETECH SKR Mini E3 V3.0 Control Board Integrated TMC2209 UART Stepper Driver Supports Marlin/Klipper Compatible Ender 3/Ender 3 Pro/Ender 3 V2 3D Printer Motherboard ZZB000590 Black

  • ⭐【Main Control Chip】BIGTREETECH SKR Mini E3 V3.0 control board adoptes the G0 series MCU-STM32G0B1RET6 or STM32G0B0RET6 ARM Coretex. integrated TMC2209 Silent stepper motor drive,Support runing Klipper&Marlin..
  • ⭐【Heat Sink Design Upgrade】New upgraded to integrated large stepping motor driver aluminum heat sink,strengthen the drive heat dissipation capacity, and greatly improve the motherboardc heat dissipation performance..
  • ⭐【Multiple Functions】It Supports BLTouch, RGB lights,Filament detection, Automatic shutdown,power-off reesume, Display supports TFT35 E3 V3.0.1/TFT35 V3.0.1/TFT28/TFT43/TFT50/TFT70 V3.0 touch screen as well as original 12864 LCD of Ender 3 printer..
  • ⭐【Fan Upgraded】Increase Three CNC heat dissipation controllable fan interface to reduce the printer temperature when the device is working..
  • ⭐【Multiple Compatibile】BIGTREETECH SKR MINI E3 V3.0 Control board is design for Ender 3,plug and play,compatible with Ender V2 Ender 3/ende 3 pro/ender 5/ender 5 pro/CR-10 3D printer, the firmware is pre-install well before we ship out, you can select the firmware base on your needs..
Check Stock