ReviewsThe Type Of The

USB to USB C,Type C Female to USB Male,Type C Male to Type C Female,Compatible Samsung GalaxyMode,iPhone 13pro 12 ProXR 8 7,Laptop, PC

  • ·This is a USB-C female to USB-A male adapter. Insert the USB C end of the adapter into the USB-C port, and then connect your flash drive or other standard USB-A devices..
  • ·The 6-piece C-type female to C-type male adapter is compatible with any laptop/tablet/smartphone with a USB C port, charging or data transmission, and does not support video signal transmission..
  • ·USB C to USB/Type C female to Type C male/Ip female to Type C male/Type C female to Ip/Adapter..
  • ·iphone Female To Type C Male ,USB 3.0Female To Type C Male,Type C Female To USB Male ,Type C To USB B(Connect Printer /Piano, drums).
  • ·Durable aluminum alloy ensures that it will not wear out with the passage of time. Space silver is a good choice, high-quality Samsung Galaxy S10 / S9 / S8, A3 A5 (2017), Note 9/8/7, HUAWEI P30 Pro / P30 / P20 Pro / P20 Lite / P10 / Mate 20 / Mate10 / Nova 2, LG G6, OnePlus 6T, Sony Xperia XCompact, Honor View 10/9, Moto G6/G7.
Check Stock

Martin 8JEM Quadraflex Sleeve, Thermoplastic Rubber, Inch, 5.063\ OD, 2.5\ Length

  • For use with specific Martin flange types (J type flanges in the case of JEM and JEMS type sleeves, and all flange types in the case of EM type sleeves) in the Quadra-Flex series flexible coupling assemblies (sold separately).
  • Thermoplastic rubber for resistance to oil and higher temperatures.
  • Three types: one-piece solid (Type JEM), one-piece split (Type JEMS), and two-piece split with a metal retaining ring (Type EM) for applications where the coupled shafts are difficult to separate.
  • Operating temperatures range from -50 to 275 degrees F (-46 to 135 degrees C).
Check Stock

Amazon Basics USB Type-C to USB Type-C 2.0 Charging Cable - 3-Foot Black 5-Pack

  • 5 Pack of USB Type-C to USB Type-C 2.0 Cable.
  • Connect USB Type-C enabled devices (MacBook, Chromebook Pixel, Galaxy Note 7 etc.) with standard USB Type-C 2.0 enabled devices and accessories....
  • Ideal for charging and powering USB Type-C enabled devices, as well as syncing data, photos and music.
  • Reversible design - easily insert the connector into any Type-C enabled device (does not matter which side is up).
  • Type-C port is half the width and one-third the height of a standard USB-A connector (slightly larger compared to Lightning or Micro-USB ports).
Check Stock

Martin 6EM Quadraflex Sleeve, Thermoplastic Rubber, Inch, 1.875\ OD, 1.875\ Length

  • For use with specific Martin flange types (J type flanges in the case of JEM and JEMS type sleeves, and all flange types in the case of EM type sleeves) in the Quadra-Flex series flexible coupling assemblies (sold separately).
  • Thermoplastic rubber for resistance to oil and higher temperatures.
  • Three types: one-piece solid (Type JEM), one-piece split (Type JEMS), and two-piece split with a metal retaining ring (Type EM) for applications where the coupled shafts are difficult to separate.
  • Operating temperatures range from -50 to 275 degrees F (-46 to 135 degrees C).
Check Stock

Martin 7JEM Quadraflex Sleeve, Thermoplastic Rubber, Inch, 4.344\ OD, 2.188\ Length

  • For use with specific Martin flange types (J type flanges in the case of JEM and JEMS type sleeves, and all flange types in the case of EM type sleeves) in the Quadra-Flex series flexible coupling assemblies (sold separately).
  • Thermoplastic rubber for resistance to oil and higher temperatures.
  • Three types: one-piece solid (Type JEM), one-piece split (Type JEMS), and two-piece split with a metal retaining ring (Type EM) for applications where the coupled shafts are difficult to separate.
  • Operating temperatures range from -50 to 275 degrees F (-46 to 135 degrees C).
Check Stock

Martin 7JEMS Quadraflex Sleeve, Thermoplastic Rubber, Inch, 4.344\ OD, 2.188\ Length

  • For use with specific Martin flange types (J type flanges in the case of JEM and JEMS type sleeves, and all flange types in the case of EM type sleeves) in the Quadra-Flex series flexible coupling assemblies (sold separately).
  • Thermoplastic rubber for resistance to oil and higher temperatures.
  • Three types: one-piece solid (Type JEM), one-piece split (Type JEMS), and two-piece split with a metal retaining ring (Type EM) for applications where the coupled shafts are difficult to separate.
  • Operating temperatures range from -50 to 275 degrees F (-46 to 135 degrees C).
Check Stock

Amazon Basics USB Type-C to USB-A Male 3.1 Gen2 Cable - 3-Foot 0.9 Meters - Black 5-Pack

  • IN THE BOX: 5-pack of 3 foot USB Type-C to USB-A Male 3.1 Gen2 cables for connecting USB Type-C enabled devices (MacBook, Chromebook Pixel, Galaxy Note 7, etc.) with standard USB Type-A enabled devices (car/wall charger, external battery power bank, etc.).
  • FOR USB TYPE-C DEVICES: Ideal for charging and powering USB Type-C enabled devices, as well as syncing data, photos and music.
  • REVERSIBLE DESIGN: Easily insert the Type-C connector into any Type-C enabled device (does not matter which side is up).
  • COMPACT DESIGN: Type-C port is half the width and one-third the height of a standard USB-A connector (slightly larger compared to Lightning or Micro-USB ports).
  • ULTRA FAST SPEED: Up to 10 Gbps data transfer speed (SuperSpeed+).
  • power output up to 15W (5V, 3 Amp). Do not exceed recommended load (15W, 5V/3A)..
Check Stock

DeWalt 5140032-78 Replacement Table Saw Miter Gauge

  • The purpose of a miter gauge is to allow user to position and safely guide the workpiece. This replacement miter gauge is simple to install, which minimizes downtime..
  • The miter gauge only fits DeWalt DWE 7490X Type 1, DWE 7490X Type 2, DWE 7491RS Type 1, DWE 7491RS Type 2, WE 7499GD Type 1, DWE 7499GD Type 2.
  • The miter bar swize is 22.5mm x 9.2mm x 300mm(W x H x L)..
  • There are lines for every one angle on miter gauge body, including larger lines at the five degree marks( 30, 45, 60, 75 and 90 ).This allows you to adjust the miter gauge to any angle you need..
Check Stock

901901 Piston Bumper fit for Porter Cable FR350 FC350

  • 901901 Piston Bumper fit for Porter Cable FR350 FC350..
  • This part acts as a cushion when the piston/driver retracts back into the cylinder after being fired..
  • This Piston Bumper is located Cylinder Cap of nail guns..
  • Fit For FC350 Type 1, FC350 Type 2, FC350 Type 3, Fit For FR350 Type 1, FR350 Type 2, FR350 Type 3, Does NOT WORK for the FR350A model..
Check Stock

Amazon Basics USB Type-C to USB-A Male 3.1 Gen2 Cable - 3 Feet (0.9 Meters) - White, 5-Pack

  • IN THE BOX: 5-pack of 3 foot USB Type-C to USB-A Male 3.1 Gen2 cables for connecting USB Type-C enabled devices (MacBook, Chromebook Pixel, Galaxy Note 7, etc.) with standard USB Type-A enabled devices (car/wall charger, external battery power bank, etc.).
  • FOR USB TYPE-C DEVICES: Ideal for charging and powering USB Type-C enabled devices, as well as syncing data, photos and music.
  • REVERSIBLE DESIGN: Easily insert the Type-C connector into any Type-C enabled device (does not matter which side is up).
  • COMPACT DESIGN: Type-C port is half the width and one-third the height of a standard USB-A connector (slightly larger compared to Lightning or Micro-USB ports).
  • ULTRA FAST SPEED: Up to 10 Gbps data transfer speed (SuperSpeed+).
  • USB-IF CERTIFIED: Compliant with USB 3.1 Gen 2.
Check Stock

Staple Gun with Remover - 3 in 1 Heavy Duty Staple Nail Steel Gun Kit with 3000 Staples, Upholstery Stapler for Fixing Material, Decoration, Carpentry, Furniture, Doors and Windows

  • [MULTI-PURPOSE 3 IN 1 STAPLE GUN KIT] Special binding groove allows easily insertion of Door-type, U-shaped, T-type three-in-one manual staples are ideal for repair, decoration and fastening to meet your various tacking needs..
  • [RUGGED AND DURABLE] It adopts 5.86mm large all-steel fixed column, high-strength chrome steel body, surface plating treatment, durable and not easy to damage, no rust..
  • [INCLUDED 3 DIFFERENT NAILS] Comes with 2000pcs Door-type, 500pcs U-type, 500pcs T-type staples to meet your different needs. (D-Type 11x8 mm.
  • T-Type 2x10 mm) Ideal for repairing, decoration and fastening..
  • [EASILY AND SECURELY] According to the ergonomic design, the hand feels more fit, more comfortable and non-slip, and more labor-saving. Use the depth adjustment knob on the top of the brad nail gun to fit the thickness of the material you are using, which will make your upholstery work easier..
  • [100% LIFETIME GUARANTEE] - Unlike other products, we believe in the quality of our products.if you are not 100% satisfied just contact us to arrange a return and we will offer you a full refund or exchange!No risk ,add to cart now..
Check Stock