ReviewsThermal Cutting Machine

Wathai 100x100x3mm Blue Thermal Conductive Silicone Pad For CPU GPU IC PS3 PS2 Xbox Heatsink Cooling

  • Thermal Pad is an upgraded version of the thermal grease Paste, good thermal conductivity, Soft a little sticky, super electrical insulation, it can be arbitrarily cut size..
  • it has good thermal conductivity and electrical insulation properties,good stability,wide use of temperature,in -40 ℃ -200 ℃ range does not melt.
  • You can according to the size of the gap between the heating element and the heat sink to select the appropriate thickness of the thermal silica Pad, the size of the self-cutting..
  • Thermal pad also has Insulation, Non-conductive, wear-resistant, fire-retardant, compression, buffering, no damage to metal materials, etc effect..
Check Stock

WeldingStop 40pcs SL60 Electrode 9-8215 Tips 9-8211 Nozzle 80A for Thermal Dynamics SL60 SL100 Torch CutMaster 52 82 152 102 Plasma Cutter Consumables

  • ✓CutMaster Cutter—— The plasma cutter spare parts kit are fitting in Thermal Dynamics CutMaster 52 / 82 Plasma Cutter SL60 Plasma Cutting.
  • The plasma consumables also can fit Thermal Dynamics CutMaster 102 / 152 Plasma Cutter with SL100 Plasma Torch.
  • ✓For Use With Torch—— These electrodes and tips are fitting in plasma Torches 2CZF1 and 2CZF2.
  • ✓Package Including—— 20pcs SL60 electrodes 9-8215 and 20pcs SL60 standoff tips 9-8211 80A Nozzle WS OEMed.
  • ✓Plasma Cutting Current—— These plasma consumables can be uesd within 80A plasma cutting.
  • ✓Replacement Parts—— These electrodes and tips are replacement parts that made by WeldingStop, and not original.
Check Stock

Cricut Variety Pack(1 StrongGrip, 1 LightGrip, 1 StandardGrip) Adhesive Cutting Mat 12

  • Works with the Cricut explore machine, Cricut expression machine, and Cricut expression 2 machine.
  • One 12" x 12" standard grip adhesive cutting mat, one 12" x 12" light grip adhesive cutting mat, and one 12" x 12" strong grip adhesive cutting mat.
  • Recommended materials for standard grip adhesive cutting mat: cardstock, pattern paper, embossed cardstock, iron-on, and vinyl.
  • Recommended materials for light grip adhesive cutting mat: printer paper, thin cardstock, vellum, construction paper, and vinyl.
  • Works with the Cricut Explore machine, Cricut Expression machine, and Cricut Expression 2 machine.
  • One 12" x 12" StandardGrip adhesive cutting mat, one 12" x 12" LightGrip adhesive cutting mat, and one 12" x 12" StrongGrip adhesive cutting mat.
  • Recommended materials for StandardGrip adhesive cutting mat: Cardstock, Pattern paper, Embossed cardstock, Iron-on, and Vinyl.
  • Recommended materials for LightGrip adhesive cutting mat: Printer paper, Thin cardstock, Vellum, Construction paper, and Vinyl.
  • Recommended materials for StrongGrip adhesive cutting mat: Thick cardstock, Glitter cardstock, Magnet material, chipboard, Poster board, and Fabric with stiffenerDescriptionCRICUT CUTTING MAT 12X12 VARITY 3 PACK.
Check Stock

Longer Ray5 Laser Engraver Machine Laser Cutter Engraving CNC Machine, 5W Laser Engraver with 0.08 * 0.08 Compressed Spot, 32-bit Motherboard, Diy Engrave Area 400x400mm

  • 1. [32-bit chipset and WIFI connectivity] RAY5 is built using the 240MHz ESP32 chipset. It is faster and more powerful than the equivalent machine with 8-bit chipset. Support WIFI connection to control engraving or cutting through web or application, more convenient..
  • 2. [Touch screen and offline engraving] 3.5-inch smart color screen, so you can easily meet various DIY needs. Built-in controller, no need to connect the laser engraving machine with computer. Just save the file to TF card, Ray5 will engrave or cut according to the program you set, use Ray5 anytime and anywhere..
  • 3. [Ultra-fine laser dot and powerful laser module] This laser engraver adopts the latest laser technology, the laser laser dot size is 0.08 * 0.08 mm, which makes engraving or cutting more powerful. The engraving speed can reach 10000 mm/min..
  • completely safe, you can use with confidence..
  • 5. 【Professional technical support and after-sales service】Our experienced engineers provide you with technical support. Provide you with detailed manuals, suitable for any skill level..
Check Stock

SL40 Plasma Torch Electrode 9-0096 fit SL40 Plasma Torch Thermal Dynamics Cutmaster 42 Plasma Cutter Consumables 10pcs

  • Plasma consumable type--SL40 plasma torch Electrode Tip kit, Rated cutting current 40amp plasma tip.
  • SL40 plasma torch consumables Ref code—9-0096 9-0094.
  • The SL40 plasma tip can fit Thermal Dynamics Cutmaster 42 (1-4200，1-4200-7，7-0040) Plasma Cutter SL40 Torch (Ref. Code 7-0040).
  • The 9-0096 9-0094 plasma nozzle can also fit Thermal Dynamics Cutmaster 12+ / Cutmaster 12 Plus (1-4200-4) Plasma Cutter SL40 plasma cutting torch (Ref. Code 7-0040).
  • The plasma tip are replacement parts which produced according to the standard size by WeldingStop, and not original.
Check Stock

AVNTKER Double Sided Thermal Tape 1-inch/25mm Super Strong Adhesive Non Conductive Heatsink Sticky Tape for CPU, GPU, SSD Drive, HDD, VGA, PCB, LED Strips, 3D Printer, Raspberry Pi Radiator

  • Material: Double sided thermal tape is made of a mixture of acrylic polymer, thermal conductive ceramic powder and silicone adhesive, full roll size 20m x 25mm x 0.25mm (Length:66 feet x Width:1-inch).
  • Excellent Performance: Thermally conductive sticky tape has super stickiness and can firmly fix the heatsinks to the heating element, effectively improving the heat transfer between electronic components. (substitute screws, rivets, welds, fastener and liquid glue).
  • High Durability: Thermal duct tape has extremely stable performance, durable adhesion on both sides, no residual glue, and can work for a minimum of 5 years in high temperature environment of 80-155°C. ( If combined with heat conduction paste or cooling silica gel pad, the effect will be better ).
  • Security Application: The heat dissipation tape is insulative and non-conductive, which eliminates any risks of causing short circuit, adding more protection to the CPU, GPU, VGA cards, HDD, SSD drive, VRAM, M2 hard disk, Water cooling kit, Laptop, PCB, IGBT, Mos tubes, Diode, Triode, Circuit board, Logic board, Raspberry pi, LED cooler, 3D printer.
  • Widely Applications: Heavy duty two sided stick tape can be used for attach aluminum/copper heat sinks to heating element, fixed the carpet to prevent sl....
Check Stock

Repro FX Spirit Master Stencil Paper 100-sheets HAND USE ONLY -Tattoo Supplies-

  • 100% Authentic Spirit Thermal Fax Stencil Paper (8.5 X11) - 25 Sheets.
  • 4 Ply Sheets, Size 8.5x 11 , Purple dye..
  • Can be used with tattoo thermal copy machine and by free hand.
  • Create sharp, clean stencil onto the skin..
  • Paper can be run through at 3M Thermal fax machine, can be used to do portraits on the actual photo, can also be used without a machine trace straight....
Check Stock

GIRAFVINYL 3D Puff Heat Transfer Vinyl 10” X 4FT Red HTV Iron Vinyl for DIY T Shirt and Fabric （Red）

  • 3D PUFF HTV VINYL:What's special about this heat transfer vinyl is that it expands after being ironed at high temperature, which gives our red HTV vinyl project a 3D magic effect, which is better than normal PU red heat transfer vinyl..
  • EASY TO USE HEAT TRANSFER VINYL:3D puff heat transfer vinyl is very easy to use, it is easy to weed, the cutting blade is the same as normal PU heat transfer vinyl, and the temperature is also 338 degrees Fahrenheit for 15 seconds..
  • PREMIUM IRON ON VINYL: The expanded three-dimensional effect of 3D vinyl htv after high temperature ironing will not disappear. The t-shirts and clothes made by customers can be machine washed and hand washed after 24 hours without damage or fading, and they are very durable..
  • WIDE RANGE OF APPLICETIONS:Wide range of applications: Thermal transfer vinyl is compatible with various cricut, CAMEO and other vinyl cutting machines, can be used on natural or artificial fiber fabrics, and can decorate clothes made of various cotton, polyester, canvas, denim and other fabrics , shoes, bags.
Check Stock

hynade CNC Blow Back Digital Air Plasma Cutter, Non-HF Pilot Arc Non-Touch Plasma Cutting Machine, THC Torch Height Control Enabled (CUT60DN)

  • Dual voltage plasma cutter :This is a 110/220V Non-HF Blow Back Pilot Arc Plasma Cutter, Input Power AC110/220V±15%,AC110/220V 55A cutting current with 60% duty cycle, 220V 55Amps 110V 35Amps Cutting Current.The working power range from 100V to 250V, Under 220V Pilot arc will not reliable if the voltage lower than 190V. Under 110V, the pilot arc will not reliable if the voltage lower than 100V.
  • Plasma cutter cutting thickness: Max Cutting Thickness 25mm@55A 220V 70PSI, Clean cutting thickness 20mm@55A 220V 70PSI, 12mm Clean Cutting thickness under 110V 60PSI. 63A power break, 45L/min Air compressor is suggested.
  • 2T/4T Function :Plasma cutting machine CUT60DN with 2T/4T function, also with Air/Cut Function, 2T 4T easy let the user operate machine and it is great help for the CNC cutting table. THC torch height control enabled. machine with function for torch protection, The LED light up if the torch connecting is not well, It will also lighting up while replacing the torch consumables,machine is not able to work while it lighting up.
  • CNC Plasma Cutting Machine : have 2 pins and 4 pins connecting port at rear of machine. 2 pins connector for The arc voltage output ratio 1:1, 4 pins connector for Signal Control.Easy works with CNC cutting table.The plasma....
Check Stock

Invisible Man

  • A small investment can make a huge improvement in the cutting performance of your machine.
  • Getting the best cutting performance from your Prestige Pro machine can be as simple as changing the PR standard cutting pad.
  • This PR Standard Cutting Pad measures 9 7/8" x 18"..
  • The many significant advantages of the extended length of this PVC vinyl Cutting Pad are an increased work surface, the ability to shuttle multiple dies through the machine for quicker cutting and for easy registration of ClearCrop Dies..
  • Cutting pads need replacement generally after 4-6 months.
Check Stock

WeldingStop 9-0094 9-0096 SL40 Torch Plasma Electrode Tip fit Thermal Dynamics Cutmaster 42/12+ Plasma Cutter SL40 Plasma Torch Consumables 10pcs

  • Plasma consumable type--SL40 plasma torch Electrode Tip kit, Rated cutting current 40amp plasma tip.
  • SL40 plasma torch consumables Ref code—9-0096 9-0094.
  • The SL40 plasma tip can fit Thermal Dynamics Cutmaster 42 (1-4200，1-4200-7，7-0040) Plasma Cutter SL40 Torch (Ref. Code 7-0040).
  • The 9-0096 9-0094 plasma nozzle can also fit Thermal Dynamics Cutmaster 12+ / Cutmaster 12 Plus (1-4200-4) Plasma Cutter SL40 plasma cutting torch (Ref. Code 7-0040).
  • The plasma tip are replacement parts which produced according to the standard size by WeldingStop, and not original.
Check Stock