ReviewsThermal Electrical Insulation Boards

Wathai Off-White 100pcs 10x10x1mm Thermal pad for GPU CPU PS3 PS2 Heatsink Cooling Silicone Pad

Package include: 100pcs 10x10x1mm thermal conductive pad.
Dimensions: 10x10mm； Thickness:1.0mm； Thermal Conductivity: 1.5(W/m-k)； Color: Off-white； Weight: 19g or 0.67oz.
Thermal Pad is an upgraded version of the thermal grease Paste..
good thermal conductivity, Soft a little sticky, super electrical insulation..
Not electric conductive to prevent any electronic damage..

Check Stock

Thermopad Thermal Grizzly Minus Pad 8 - Silicone, Self-Adhesive, Thermally Conductive Thermal Pad - Conducts Heat and Cools The Heating Elements of The Computer or Console (100 × 100 × 2,0 mm)

... used by Apple. K5-PRO can replace soft thermal pads that are used on computers (up to 3mm thick).
K5-PRO has thermal conductivity K>5,3 W/m.K * (at least 3 times higher than common thermal pads that are used on computers and commercial electronics) .K5-PRO is applied very easily directly on the component and has no electrical conductivity. It can be heated up to 250 degrees (Celsius) and has a long operational life time (practically infinite after the installation).
K4-PRO is a high quality thermal paste designed for use on computer BGA components (GPU, CPU, etc).K4-PRO is a very low viscosity thermal paste (especially when heated during the fist use). It will cover all the invisible gaps between the component and the heatsink without creating a film of paste like most low cost thermal pastes..
K4-PRO has thermal conductivity K>4,6 W/m.K * (3 times higher than common thermal pastes that are used on computers and commercial electronics).K4-PRO is applied very easily directly on the component and has no electrical conductivity. It can be heated up to 220 degrees (Celsius) and has a long operational life time (practically infinite).
Computer Systems matterials science laboratory testing : Method using a comparative technique (P. Karydopoulos, P. Frantzis,....

Check Stock

Vega Bond Purplecoat 12 Pack Insulation Spray Foam 29 oz (240 Board Feet) with App Gun and Cleaner 12 Pack, Purple

Innovative alternative to traditional building insulations such as fiberglass batts and rolls, blow-in, insulation boards, glass wool and rock wool.
R value is 5.66 per inch and thermal insulation value 0.025 W/(m.K).
Easily apply to uneven and hard to reach surfaces such as roof, facade, attic, ceilings, foundation etc.
Prevents thermal bridging (heat bypass) as it covers the studs with continuous insulation.
New applicator gun with swivel tip that can spray 30-degree angle to any way you need.
Purplecoat comes with 2 types of nozzles, orange fan nozzle (10 pcs) is designed for ceilings and roofs and red fan nozzles (12 pcs) are for vertical applications.
Can also be used on automobile body, trailers, RV, sheds, boats, yachts, kayaks, vessels.
Unique formula provides airtight seal for most building materials such as wood, brick, stone, concrete, metal, drywall, glass, mdf, osb, etc.

Check Stock

Thermal Grizzly Kryonaut The High Performance Thermal Paste for Cooling All Processors, Graphics Cards and Heat Sinks in Computers and Consoles (11.1 Gram)

COMPARE TO 12.8W IMPROVE 2W:Our thermal pad gets 14.8 W/mK Thermal Conductivity,It with high thermal conductivity, suitable for most common chips.It can effectively cool the temperature down in seconds.Any electrical traces wouldn’t result in damage of any sort.It has the functions of heat conduction, insulation, caulking, shock absorption, shockproof etc..
SILICONE WILL NOT MELT :It can work on high temperature performance in -40 ℃ - 200 ℃,supper reliable and durable.Non-toxic, odorless, wear resistant, anti-static, anti-corrosion, fire retardant, compression, good insulation..
WIDELY APPLICATION: Great for Control board, motor, electronics like CPU, GPU, Heat Sink, Power LED, computer host, laptop, auto mechanics, DVD, VCD, LID, Set-top box, LED IC SMD DIP and any cooling modules..
HOW TO CHOOSE: Traditional thermal Grease can only fill small gaps. This thermal conductive pads is suitable for filling the larger gaps between the heating element and the radiator so that they fit closely to achieve the best cooling effect..
SERVICE GUARANCE:Soft, good malleability, with a little viscosity,this thermal pads can be cut freely according to your needs,a great assistant for both beginners and professionals.ANY PROBLEMS CAN CONTACT TO GET REFUND/RESEND..

Check Stock

ProRox SL 940 Rockwool, Roxul, Mineral Wool Insulation Board with FSK Foil, High Temperature

Noise Insulation: High density and random fiber orientation trap sound waves and deadens vibration time. Perfect for minimizing noise from offices, bedrooms, meeting rooms or spaces close to busy roads..
Thermal Insulation: Reduces energy bills for heat. Rockwool has a R-value higher per inch than fiberglass insulation.
Fire Resistant: Made of rock that is fire resistant. Properties in accordance with ASTM C553.
Long Term Performance: Due to the durability of rock it has an unlimited lifetime..
Pack of 5 Boards 3" thick 2' x 4' with FSK Foil Backing.

Check Stock

3 Pack High Temp Tapes - Viaky 20mmx65.6ft Heat High Temperature Resistant Sublimation Tape, Polyimide Film Self Adhesive Tawny Tape for Electric Task, 3D Printers, Solder, Painting and Packing Fixing

【Package Include】3 Pack high temp tapes in tawny color. Tape width 20mm(0.8in), length 20m(65.6ft)..
【Good Quality】This high temp tape made of polyimide, the surface of polymers film exhibits an excellent balance of physical, chemical, and electrical properties over a wide temperature range..
【Easy To Use】Approx heat resistance: long-term temperature resistance 250°C/482°F, short-term temperature resistance 280°C/536°F, strong self-adhesive is easy to stick, no residue after peeling..
【High Performance】The high temp tape is superior resistant to UV, high temperature, acids, alkalis, oil, moisture and abrasion..
【Multi-Uses】Perfect for all of your needs including masking circuit boards, soldering ,electrical insulation and splicing wires. It is also extensive use as electrical insulation for transformer, motor, coil, capacitor and frequency conversion power supply in electronic industry and more..

Check Stock

APT, 1 mil Thick Polyimide Adhesive Tape, HighTemperature and Heat Tape, for Masking, Soldering, Electrical, 3D Printer Application. (2\x 36 yds)

【Wide Area of Applications】-Used for electronic products, soldering, circuit boards, manufacturing, fiber optics cable, insulating circuit boards, ground barrier & insulation for coils, 3D printing, high temperature sublimation powder coating, etc..
【High Temperature】- APT Polyimide tape has highly excellent heat & solvent resistance. Minimal shrinkage after baking and clean removal, and also shows the great electrical insulation. It maintain high-temperature resistance as high as 400F (260℃)..
【Clean Removal, No Residue】- Our high temperature tape can withstand up to 400F (260℃) degrees. Remove cleanly, leaves no residue..
【No Shrinking, Curling, Or Lifter Edges】- Made with high temperature silicone adhesive and premium film. Our tape resists curling, shrinking, and lifted edges every time..
【Trusted Every Where】- Our tape do not contain any harmful chemicals, and complies with RoHs & Reach requirements. It is rigorously tested and meets American Society for Testing and Materials D-5213 standard, for high performance every time..

Check Stock

Mad Lab - Experimentos Científicos

1. Distillation of Essential Oils DIY Make a professional suit to meet your needs. All flasks are made of 3.3 borosilicate glass that is hand blown and polished for perfect fit. Comes with everything as pictured..
2. High-quality thick production, high temperature, temperature up to 500 degrees, let you worry-free experiment. Perfect set for organic chemistry labs, distillation, fractional distillation, separation, purification, and synthesis..
3. Good thermal stability. The coefficient of thermal expansion of glass is very small and can withstand severe temperature changes..

Check Stock

Thermal Pad 12.5 W/mK, 298X298X3.0mm, TG-A1250 High Thermal Conductivity, Heat Sink Cooling Pad, for PC Laptop/GPU/CPU, Electrical Insulation

Good Thermal Conductivity Ability - Using the silicone as the base material, adding thermal conductive powder and flame retardant together to make the mixture to become thermal interface material..
Outstanding performance - Low thermal resistance & Electrical insulation.
Safe and easy to use - You can choose a suitable thickness of thermal pad according to the gap between the heating source and the heat sink. It can be cut to size and easy to install, replacing the traditional thermal paste..
Application - Best for high power applications, high-wattage electronics such as electric vehicles, automation, 5G applications, servers, etc..

Check Stock

5 Rolls 20mm x33m(108ft) Heat Tape High Temperature Heat Resistant Tape Heat Transfer Tape Thermal Tape Sublimation Tape Heat Vinyl Press Tape Up to 260℃(500℉) for Soldering Circuit Board, No Residue

...gh heat press tape can meet daily needs in different situations, such as keep your design in place when you making shirts and hats,help to do heat transfer vinyl on a heat press.
[WIDELY USED] - The heat tape for heat press is not only suitable for sublimation on cups and heat transfer vinyl, but also for protecting electrical wires,electric motor,soldering, 3D printing, PCB boards, electrical insulation, high-temperature powder coating and other DIY projects.
[STRONG ADHESIVE] - The heat transfer tapes are made of polyimide film with silicone adhesive, it is easy to stick, not easy to break while peeling and leaves no residue after peel away. Works well in coffee mug press, heat press, T shirt application or other thermal transfer printing.
[MEET YOUR NEED] - Package includes 5 rolls heat press tapes. ★ If you have any questions about the sublimation tape, please feel free to contact us, we are committed to providing the high quality products and efficient customer service.

Check Stock

OwlTree 4 Pack Thermal Pad,100x100mm 0.5mm 1mm 1.5mm 2mm Highly Efficient Thermal Conductivity 6.0 W/mK,Heat Resistant Silicone Thermal Pads for Laptop Heatsink CPU GPU SSD IC LED Cooler

Excellent thermal conductivity: Made of thermal silica gel with heat conductivity of 6.0 W/mK.
Reliable & Durable: High temperature performance in -40 ℃ - 200 ℃ will not melt, non-toxic, odorless, anti-corrosion, wear resistant, anti-static, fire retardant, compression, good insulation, contact with any electrical traces wouldn’t result in damage of any sort..
Application: Thermal Pad used in the control board of electronic and electrical products.
Pads and foot pads inside and outside the motor.
Appliances, automotive machinery, computer hosts, notebook computers, DVDs, VCDs, and any materials that require filling and cooling modules..
Convenient & Affordable - Dimension 100x100mm, the thermal pads can be cut freely according to your needs. 0.5mm,1mm,1.5mm,2mm/set can meet different needs..
Package include: 0.5mm,1mm,1.5mm,2mm thickness each 1pcs, total 4pcs..

Check Stock