ReviewsThermal Regulator

Wilkins 114-NR3XL 1 1/4 Pressure Reducing Valve

  • Ideal for use where Lead-Free* valves are required.
  • Designed for installation on potable water lines to reduce high inlet pressure to a lower outlet pressure..
  • The integral strainer makes this device most suitable for residential and commercial water systems that require frequent cleaning of sediment and....
  • The direct acting integral by-pass design prevents buildup of excessive system pressure caused by thermal expansion..
  • The balance piston design enables the regulator to react in a smooth and responsive manner to changes in system flow demand, while at the same time,....
Check Stock

Beduan Air Pressure Control Valve Regulator with Gauge Solid Brass Construction 140 PSI

  • DESIGN: The EB75 is intended for use where inlet pressure does not exceed 300 PSI.
  • Suitable for cold or hot (to 180 degrees Farhenheit) non potable water service.
  • IRON BODY: Compact, iron-body pressure reducing and regulating valve.
  • BACK PASS CHECK: Allows water to flow back through the regulator in cases of thermal expansion caused by hot water heating devices.
  • DESIGN: EB75 FPT X FPT Cartridge based design, 10 PSI - 70 PSI range.
  • MADE IN THE USA: Prepared and tested in the Alabama.
Check Stock

BOJACK LM317T Adjustable Positive Voltage Regulator 1.2 V to 37 V 1.5 A IC LM317 chip TO-220 Pack of 25 pcs

  • BOJACK LM317T Adjustable Positive Voltage Regulator.
  • Output Voltage:Adjustable Between 1.2 V to 37 V.
  • LM317T employs internal current limiting,Thermal Overload Protection, and Output Transistor Safe Operating Area Compensation.
Check Stock

Landalanya Replacement New for Dell XPS 8940 Special Edition, Optiplex 7080 Micro Desktop Computer Voltage Regulator VRM Heatsink Thermal Module P/N:0612F7 612F7

  • Landalanya Replacement New for Dell XPS 8940 Special Edition, Optiplex 7080 Micro Desktop Computer Voltage Regulator VRM Heatsink Thermal Module P/N:0612F7 612F7.
Check Stock

SCITOO Voltage Regulator Rectifier 2001-2006 for Honda CBR600F4i

  • 【FITMENT】 Voltage Regulator Rectifier for Most Polaris 500 for 1998-2002 Polaris Sportsman 500 HO 4X4 6x6 RSE Carb X Carb, for 1999-2002 Polaris Magnum 500 4x4 EB HDS RNK, for 1997-2002 Polaris Scrambler 500 2X4 4X4, for Polaris Worker 500, for Big Boss 1998-1999.
  • 【PREMIUM QUALITY - 4 WIRE REGULATOR RECTIFIER】 Voltage Regulator Rectifier is composed of high-quality aluminum materials and advanced electronic components, which can better help Output stabilize the voltage: 14.5± 0.5V voltage, prevent the battery from overcharging. The Rectifier Regulator also has to overheat protection to improve the heat sink and charging capacity..
  • 【REPLACEMENT OEM PART】 Replace for Most Polaris 500 voltage regulator - 4060173, 2203636 - 4 wire regulator rectifier. our Regulator Rectifier is comparable in fit, form and function to the original part, can be installed and worked perfectly like original OEM parts..
  • 【HIGHT QUALITY GUARANTEED - VOLTAGE REGULATOR RECTIFIER】 100% Brand new high performance Voltage Rectifier Regulator replacement parts are tested and quality controlled prior to shipment. Plug-and-play, easy installation..
  • 【QUALITY ASSURANCE】 Package included: 1x Voltage Regulator. Please carefully check whether ....
Check Stock

Aluminum Heat Radiator Heatsink Cooling Fan 150x85x12mm Blue Tone

  • Made of high quality blue anodized Aluminum , good thermal conductivity..
  • Size: Dimension: 5.9 x 3.34 x 0.51 inch / 150 x 85 x 12mm (L*W*H), please make sure that the size of the heat sink fits that of your component..
  • This large big aluminum heatsink reduces the risk of hardware failure and power loss due to overheating, more safety..
  • Maximize surface area Designed in contact with the cooling air. The 448pcs fins increase the area of the board and thus provide for greater heat transfer..
  • Widely used for computer, Power Transistor, FET, IC, Power Amplifier, Voltage Regulator, MOSFET, SCR etc..
Check Stock

Zurn Wilkins 1\ NR3XL Pressure Reducing Valve with double union FNPT connection

  • Designed for installation on potable water lines to reduce high inlet pressure to a lower outlet pressure.
  • Integral strainer makes this device most suitable for residential and commercial water systems that require frequent cleaning of sediment and debris.
  • Direct acting integral by-pass design prevents buildup of excessive system pressure caused by thermal expansion. Maximum Working Temperature (F):180.
  • Balance piston design enables the regulator to react in a smooth and responsive manner to changes in system flow demand.
  • Provides protection from inlet pressure changes.
Check Stock

Elementi Lunar Bowl Cast Concrete Fire Pit - LP

  • Modern 42-inch circular auto-ignition fire pit is a stylish addition to any backyard or outdoor space.
  • Dimensions (L x W x H): 42 x 42 x 16 inches.
  • High-quality 45,000-British-thermal-unit propane fire pit creates a clean and smokeless flame that provides welcoming ambiance and warmth.
  • Durable construction stands up to harsh weather conditions such as snow, wind, rain, sleet, and strong sun.
  • Material: Glass-fiber reinforced concrete.
  • Fire bowl is CSA-certified and offers easy lighting and flame height adjustments, creating an inviting space for the whole family.
  • Included with this sleek fire table is a durable canvas cover, 13.2 pounds of lava rocks, a repair kit, and a pre-attached 10-foot hose with regulator.
Check Stock

Taprite WYE'd Dual Check Valves Beer Regulator - Draft Beer and Homebrew Keg Co2 Cylinder Tank Pressure Regulator and Gauge

  • COMMERCIAL GRADE REGULATOR - This CO2 regulator for homebrew or draft beer kegerator is a commercial grade beer regulator that is used by professional installers in bars and restaurants. This CO2 tank regulator lets get a professional quality beer at the comfort of your home!.
  • DURABLE AND MADE TO LAST - Taprite WYE'd Dual Check Valves Beer Regulator is made with high-quality materials to ensure your CO2 regulator is durable and made to last for years. This keg pressure regulator's high-grade components make it perfect for home or commercial use!.
  • SMOOTH PRESSURE CHANGE - Changing the pressure is very smooth and easy with Taprite WYE'd Dual Check Valves Beer Regulator. As you turn each valve, the pressure gradually increases or lowers, making it much easier to calibrate the output pressure to your desired level..
  • REBUILD KITS AVAILABLE - Our Beer CO2 Regulator with WYE have rebuild kit available so you won't have to get a whole new replacement if some parts eventually wore out. The beer regulator's worn or broken parts and equipment such as the nipples, valve, and gauge are easy to configure, replace and fix!.
  • BUILT IN SEAL TO PREVENT LEAKS - With this draft beer dispenser CO2 regulator, there is no need to use a washer because the rubber O-ring seal....
Check Stock

HARRIS Harris HVAC Port-A-Torch Welding and Brazing Outfit 4400177

  • Kit includes HA-3i and HA-8i Inferno brazing tips.
  • and 3/16-inches by 12-feet A x A red hose.
  • Durable, long-life design crafted from strong 304 stainless steel tube stock and designed to stand up in the field.
  • Quality, precision manufacturing for consistent production and each tip is tested to ensure a perfect orifice and again to ensure flame quality.
  • Hottest tip, everytime based on exacting standards to eliminate irregular heating, "horns" and other inconsistencies.
  • Proof positive - the perfect flame - the tips are configured to produce reliable and repeatable flame performance and are evaluated using thermal photography techniques.
Check Stock

CGA580 Argon CO2 Regulators Argon Gauges Gas Welding Regulator Compatible with Mig Tig Miller Lincoln Weld 0-4500PSI / 0-10BAR - CO2 Argon Regulator with 6.6Ft Hose

  • Universal Gas Welding Regulator - This Gas Pressure Regulator/Flowmeter Can Be Used with Argon, Helium and CO2 Gas Tanks (CGA-580 Inlet). Argon gauge 0 to 4500 PSI, argon gauge regulator provides accurate regulation of gas flow. This Gas Hose Is Ideal For Fitting Mig And Tig Welding. Ideal for commercial, industrial and laboratory applications.
  • 100% Brand New Argon Regulator with Hose - The CO2 regulator body is made of brass, Single-stage regulator, built-in pressure overload automatic degassing device. Large T-shaped adjustment handle, easy to adjust the pressure by hand. The flow tube is made of polycarbonate.
  • Accurate Argon Regulator with Pressure Gauge - CGA580 fitting (15/16" Male Thread), 9/16" male thread, 5/8" female thread. Argon gas meter measuring range: 0 to 4500 PSI. Argon CO2 Regulators Gauges Gas Welding Regulator With 6.6Ft Gas Hose. 6.6Ft Hose Quick Connect Fitting enable your tanks at a safe distance from your welding projects.
  • Reliable CGA580 Argon CO2 Regulator - The Argon CO2 flowmeter regulator has a plastic adjustment knob that allows for smooth "light touch" flow settings and has an internal safety relief design, Provides a safe environment for car driving. CO2 regulator with 2" dual gauges that will be easy to read.
Check Stock