ReviewsThermapen Calibration

Hanna Salinity Tester HI98319

Includes 4x of the Salinity Calibration Fluid Packets..
Automatic Calibration – A 35.00 ppt solution is used for calibration and automatically recognized when in calibration mode..
Displays results in parts per thousand (ppt), Practical Salinity Units (PSU), or specific gravity (S.G.).
Salinity readings are performed by an amperometric graphite probe that resists oxidation, providing better repeatability in measurements. The use of graphite also reduces the polarization effect common with testers that use two stainless steel pins..

Check Stock

BRANDTECH SCIENTIFIC 4600211 Dispensette S Fixed-Volume Bottletop Dispenser with Recirculation Valve, 1 mL Capacity

Make Calibration Adjustments in Seconds: The Dispensette Easy Calibration model can have calibration adjustments made seconds without tools or retesting, cutting calibration time by at least half.

Check Stock

Spot Hogg Archery - Extended Range Replacement Sight Tape/Yardage Tapes (Green)

Weatherproof sight tapes designed specifically for all Spot-Hogg side dial sights.
Calibrated scale ranges from 20 to 120 yards.
Allows you to accurately set your sight from 20 to 120 yards.
3 Calibration tapes and 40 different sight tapes for your specific calibration..
Instructions: Sight in at 20 - then install calibration scale. Sight in at 60 - Select the tape that corresponds with the number on the calibration scale. Install your selected sight tape..

Check Stock

Calibration Block For Lange Skinfold Caliper 5-Step 10mm 20mm 30mm 40mm 50mm

CALIBRATION TESTING Quickly and easily test your caliper to ensure calibration between 10 and 50 millimeters and thus accurate measurements..
IDEAL for testing calibration of Lange skinfold calipers and vernier calipers to give an accurate reading..
INCREMENTS are 10mm, 20mm, 30mm, 40m, and 50mm.
INSTRUCTIONS INCLUDED for caliper calibration testing. Caliper not included.
ALUMINUM CONSTRUCTION for hardness and durability..

Check Stock

HM Digital C342 TDS and EC Calibration Solution, 342 ppm (NaCl), 90 ml Volume

NaCl calibration solution, available in 342 ppm or 1000 ppm.
Comes in lightweight HDPE plastic bottles.
Use the HM Digital TDS Calibration Solution (342 PPM) to periodically re-calibrate your HM Digital TDS meter or HM Digital Water Quality Tester.
This HM Digital TDS Calibration Solution is also known as Water Tester Solution andTDS Meter Calibration Solution.

Check Stock

TRZ Refractometer Honey 10-32% Water Honey 58-90% Brix Sugar Baume for Beekeeping, Honey, Condensed Milk, Sugar Syrup, Fruit jam, Hamh Optics&Tools

USE: It is suitable for measuring honey, condensed milk, vegetable oils, sugar syrup, fruit jam and molasses..
Measruing Range: Brix (sugar): 58-90%, Resolution: Brix (sugar): 0.2%, 10-32% water with 0.2% reading.
Easy to use. Supports two calibration modes: The upper calibration line with 78.8% Brix is suitable for clove oil calibration solution and requires an additional standard test block: The lower calibration line consists of 65% Brix, a colorless and non-toxic calibration solution with a slight smell of clove oil. Do not need a test block, is more convenient and accurate..
Precision Measurement: Sharp dividing line (blue-white), good readability (daylight recognizable), adjustable eyepiece for sharpness adjustment。.
Do not calibrate this refractometer with water..

Check Stock

CGOLDENWALL Precision Lab Scale Digital Analytical Balance Laboratory Balance Jewelry Scale Scientific Scale 0.01g Accuracy 110V (5000g, 0.01g)

...et the results accurately and quickly with an accuracy of 0.01g. Its adjustable feet and level bubble design ensures its accuracy in different using environment..
Multi-functional-The electronic analytical balance features of 13 units conversion (including g/ct/oz/lb/% common units), tare/zero, counting function and calibration..
Quality Material-The analytical balance is made of ABS body with 180* 140mm large stainless steel weighing pan, which is sturdy and durable.Our laboratory scales has already been calibrated before shipment. Please only calibrate when it has relatively large error and follow the instruction of calibration..
LCD Display-LCD display with blue backlit enables clear reading of the results in any light setting with low battery and overload indication..
Notice-Our laboratory scales has already been calibrated before shipment. Please only calibrate when it has relatively large error and follow the instruction of calibration. 200g-3000g scales all include calibration weights in the package while 5000g scales are WITHOUT calibration weights for 5000g item requires 2000g calibration weights which are too heavy and might damage the scale during shipment. The weights are very easy to purchase on Amazon..

Check Stock

Digital Micron Vacuum Gauge - BELEY HVAC Vacuum Test Gauge with 13 Units Electronic High-Precision Negative Pressure Gauge of 7/16 -20UNF Interface 1/4 SAE

... work in dim light environment. The vacuum gauge has a built-in buzzer, which can be custom set to achieve a reminder alarm. At the same time the design of the rubber handle, it has a good sense of comfort, but also not easy to slip off. Automatic shut-off for 10 minutes of unoccupied use can help you save power..
4 CALIBRATION MODES: This Negative Pressure gauge in the normal mode, long press the "HOLD button" to enter the calibration mode. Then you can use the "DIF key" to switch the calibration mode, which are: atmospheric calibration, vacuum calibration, custom calibration, and restore the factory calibration value..
2 WORKING MODES:This digital HVAC micron gauge has normal mode and monitoring mode. The default mode is normal mode, short press "DIF key" to enter monitoring mode. In monitoring mode, you can set timer and other operations. The item box contains 1* vacuum gauge (without battery), 2* extension connector. BELEY provides you with 1 year warranty and 24 hours customer service..

Check Stock

Self Laminating Calibration Labels 1 x 2 Inch - Write-on Calibration Stickers with Spiral Bound Cover for for NIST Calibration, ISO-900 Calibrate Equipment 180 Quality Control Labels Per Pack

Included Calibration Labels 180 pcs Production Quality Control Labels per pack, each Industrial Stickers size is 1 x 2 Inch.
These Self Laminating Calibration Stickers have a clear, polyester self-laminating flap, that protects your writing from chemicals, tampering, and abrasion.
Our Calibration Stickers with spiral bound book protects labels from damage or loss.
Production Control Labels, Legend"Calibration - ID No./by/Date/Due".
Write-on Calibrating Sticker Labels are very easy to use, and are perfect for a small company that has to contend with NIST Calibration, ISO-900 Calibrate Equipment occasionally.

Check Stock

YINMIK YK-P01 pH Tester Digital pH Meter for Water Hydroponics, Accurate pH Temp Meter with ATC for Pool, Spa, Hot Tub, Indoor Plants, Drinking Water, Wine Beer Home Brewing, Aquarium

to measure pH of your well water , alkaline tap water and other drinks ..
[Accurate pH Tester with Effective ATC] Built with stainless steel temperature sensor, YK-P01 pH meter has an effective temperature compensation (ATC) function, which ensures the rapid response and accurate test results..
[Easy Calibration for YINMIK pH Tester] Supporting 3-point auto calibration, following the instruction manual can easily achieve 4.00, 7.00, 10.01 auto calibration. Don't worry about the calibration solution, you can easily configure up to 500ml of calibration solution for each standard using the calibration powder included in the package. In addition, you can also purchase calibration powder from the YINMIK store on Amazon at an affordable price..
[More User-friendly Designs] Backlights ensures you can use the product in a dimly lit working environment. HOLD/TEMP button can be used for reading lock, attribute to this function, the reading will not disappear after the pH meter leaves the test solution..

Check Stock

Rustark Precision Calibration Weight Set for Digital Balance Scale, Jewellery Scale (500g Set (Gram))

★1.【Great Value Calibration Weight Set】 --- You will receive a select scale calibration weight kit, including tweezers and calibration weights: 200g, 100g, 50g, 20g, 10g. This practical set is the perfect tool for your laboratory, classrooms & household use..
★2.【High Quality Material】 --- Constructed with high quality chrome plated steel material that is rust/corrosion resistant, solid, tough and durable for long service time. With a polished surface that would gives you a premium feel..
★3.【High Accuracy】 --- The biggest deviation of weight is -0.003 to +0.003g, so you can complete your project in an accurate way. Besides, these precision calibration weights features a small handle that allows you to grip stably by a tweezers, and the weight clearly embossed on the surface for quick identification..
★4.【Easy To Carry】 --- All the calibration weights and one tweezers are packed in a custom-recessed, foam-padded box for protective storage, Designed for avoiding damage during transportation..
★5.【Widely Used】 --- Ideal for jewelers, hobbyists, lab technicians, and educators. This practical set is the perfect tool for your laboratory, classrooms & household use..

Check Stock