ReviewsThermistor Or Direct To

Edgewater Parts 2188819 AP6006067 PS11739131 Refrigerator Thermistor Compatible with Kenmore KitchenAid Whirlpool and Maytag

A thermistor is used to detect the temperature in the air inside of your refrigerator..
This product is covered under a 1 Year Warranty.
Edgewater Parts 2188819, AP6006067, PS11739131 Refrigerator Thermistor Compatible with Kenmore, KitchenAid, Whirlpool, and Maytag.

Check Stock

Adafruit 259 , USB Li-Ion/LiPoly Charger, v1.2

Comes assembled and tested with a free bonus jst cable.
For charging single lithium ion/lithium polymer.
Chip supports a 10K ntc thermistor which we have stuffed as a plain 10K. For people who require temperature monitors (using high charge rates), remove the 10K and solder in the thermistor in its place.

Check Stock

W10383615 Refrigerator Thermistor With Clip Fits for Whirlpool Refrigerator Replaces WPW10383615VP 2118226 PS11753994 AP6020675 （2 Pack）

Fixes problems: Fixes problems with frost in fridges, such as parts of the fridge being too hot or too cold.
parts of the fridge being too hot or too....
Replacement: WPW10383615 refrigerator thermistor can directly replace AP6020675, W10383615, WPW10383615, WPW10383615VP, 2118226, PS11753994,....
Compatible Brands: Thermistors are compatible with Whirlpool, May-tag, Amana, Kitchen-Aid, etc..
Function: The refrigerator thermistor is also called a temperature sensor, it can sense the temperature inside the refrigerator and transmit the....
Note: Please understand this product carefully before purchasing, whether it is in line with your product model, to avoid purchasing mistakes..

Check Stock

10Pcs Car Temperature Gauge Kit-Coolant Temperature Gauge - Digital Temperature Gauge 2inch 52mm Universal Car Truck LED Water Meter Instrument Tool

... degrees Celsius. High sensitivity, easy and convenient to use. - reloj temperatura fae.
❃Application: The water temperature meter is used to measure the water temperature of a car. The number and indicator can clearly show the water temperature. - coolant temp gauge.
❃Principle: The water temperature sensor is a thermistor sensor. Screwed to the engine cooling water channel. The thermistor determines the amount of current flowing through the coil of the water temperature gauge. To guide the meter hands - coolant temp gauge.
❃ High quality: The water temperature gauge is made of ABS, sturdy and durable.ABS has excellent complete physical and mechanical properties and good low temperature impact proof. Dimensional stability. Electrical properties, wear proof, chemical proof, dyeing, finished product processing and mechanical processing are better. - car temperature gauge kit.
❃Easy to read in the dark: The blue light on the dial makes it easy to read in the dark. Its measurement range is 40-120 degrees Celsius. High sensitivity, easy and convenient to use. - reloj temperatura fae.
❃Application: The water temperature meter is used to measure the water temperature of a car. The number and indicator can clearly show the water temperature. - coolant ....

Check Stock

Sikawai W10383615 Refrigerator Thermistor with Clip Compatible with Whirlpool Refrigerator Replaces WPW10383615VP 2118226 AP6020675-2 Pack

✔️【Product Info.】- Refrigerator Thermistor W10383615 is also known as a temperature sensor, senses the temperature inside the refrigerator and....
✔️【Suitable Brands】- Compatible with Whirlpool, May-tag, Amana, Kitchen-Aid and more Refrigerator.
✔️【Replaces No.】- The W10383615 Refrigerator Thermistor Replaces AP6020675, W10383615, WPW10383615, WPW10383615VP, 2118226, PS11753994,....
✔️【Repair Symptoms 】- Frost buildup, fridge section is too warm, fridge section is too cold, the freezer section is too warm, the freezer....
✔️【100% Money-Back Guarantee】- For any reason, you are not satisfied, you can request a replacement or a full refund. Sikawai strives to....

Check Stock

AITRIP 10PCS 3D Printer Removable 3950 NTC 100K Thermistor Sensor Compatible with Creality Ender 3 5 CR10 CR-10 CR10 Anet A8 Prusa i3 MK8

Temperature sensor 100KΩ accuracy of ± 1%, Total length:1 Meter.
Compatible with Creality CR-10S Pro,CR-X,Ender 3, Ender 3X, Ender-3 Pro, Prusa I3, Anet E10 etc.
AITRIP Thermistor Sensor is Removable design and Easy to install.
Package include: 10 thermistors. Threre is no HX2.54 connector at the end of the thermistor..
Use for heated bed or extruder of 3D Printer, with DuPont connectors..

Check Stock

240597203 Refrigerator Thermistor Temperature Sensor AP4032998 1258948 240597202 AH1765215 EA1765215 PS1765215 240597203 240597201

Applicable Refrigerator Models: AP4032998 1258948 240597202 7240597203 AH1765215 EA1765215 PS1765215 240597203 240597201.
Product Use: This refrigerator temperature sensor used to adjust the internal temperature of the refrigerator, so that your refrigerator can be at a....
High Quality: This refrigerator internal thermistor replacement element is new high quality replacement part for more stable and excellent work and....
The Package Includes: 1PCS temperature sensor, NOTE: This refrigerator temperature sensor is suitable for specific models of French door....
Service:We provide friendly service, if you have any questions about the Thermistor Temperature Sensor for Refrigerator, please feel free to contact....

Check Stock

8577274 (2-Pack) Thermistor by PartsBroz - Compatible with Whirlpool Dryers - Replaces WP8577274, AP6013514, 3390292, 3406294, 3976615, 772546, ER8577274, PS11746740, WP8577274VP

✅ PART NUMBER 8577274: It’s a high-quality exact equivalent to part numbers WP8577274, AP6013514, 8577274, 3390292, 3406294, 3976615, 772546, ER8577274, PS11746740, and WP8577274VP..
✅ FOR WHIRLPOOL DRYERS: The part is compatible with several Whirlpool, KitchenAid and Kenmore/Sears clothes dryers. Check your dryer manual or reach out to us to confirm compatibility with your model..
✅ FIXES COMMON PROBLEMS: Replacing the thermistor, which regulates temperature in your dryer, can fix dryers that don’t start, shut off too soon, or don’t produce enough heat..
✅ SIMPLE DIY FIX: Forget the repairman. It only takes 10 to 20 minutes to remove a faulty thermistor and install this new one. Helpful tools include a 1/4-inch nut driver, a small flathead screwdriver, and a 1/4-inch socket and ratchet..
✅ HIGH-QUALITY PART: Designed to meet or exceed original manufacturer specifications, this exact equivalent part offers long-lasting durability..

Check Stock

uxcell 20PCS NTC Thermistors Resistors MF58 3950B 10K Ohm Glass Sealed Temperature Sensors

Made of high-quality materials and has a long service life..
Small size, fast reflection speed, stable operation for a long time, good consistency..
NTC (negative temperature coefficient) thermistor, its resistance decreases with increasing temperature. High resistance and B value accuracy.
Widely used in air conditioning equipment, heating equipment, electronic thermometers, liquid level sensors, etc..
Material: Oxide film. Temperature coefficient: NTC. Rated power: 0.25w. Package includes: 20 x NTC thermistor..

Check Stock

AMI PARTS 279838 Dryer Heating Element 3392519 (2pcs) Thermal Fuse 3977767 Thermostat 8577274Thermistor Control 22002263 Drum Bulb Replacement Part Kit Compatible with Whirlpool Kenmore Roper Maytag

PART NUMBER: 279838 Dryer Heating Element & 3392519 (2pcs) Thermal Fuse & 3977767 Thermostat & 8577274 Thermistor Control & 22002263 Drum Light Bulb.
PACKAGE LIST: 279838 Dryer Heating Element, 3392519 (2pcs) Thermal Fuse, 3977767 Thermostat, 8577274 Thermistor Control, 22002263 Drum Light..
SUPERIORITY: Suitable for most top brands, easy to install, saves time and money..
PREMIUM QUALITY: The replacement part is made from durable quality material and well-tested by the manufacturer, which can be applied for a long time..
BUY WITH CONFIDENCE: For any reason you’re not completely satisfied, you can ask for a replacement or full refund, no questions asked..

Check Stock

TRONXY Original Extruder Assembled MK8 Hotend Kit for 3D Printer with Aluminum Heating Block, 1.75mm, 0.4mm Nozzle，Bowden Extruder kit

100% TRONXY Orginal MK8 Full Set Hotend Kit.
Suitable For TRONXY XY-3 Seriers 3D Printer.
Tip of the nozzle, aluminum heating block, throat pipe (built-in Teflon).
MK8 Extruder Hot End Kit With thermistor 100K and Heater 24V 50W.
Thermistor and heater cable length: 1.2 m ,Feed tube:50cm.

Check Stock