ReviewsThermocouple Probe

Type K Pipe Clamp Temperature Lead Probe HVAC Pipes Jaw Clip Plumbing Clamp

Good for Multimeters, clamp Meters and thermometers that accept a type K temperature probe..
This K-type probe pipe clamp's operation temperature: -40~200℃..
Probe connection type: K-Type pipe clamp..
A good K type pipe clamp accessories for temperature measurement..
Lead thermocouple clip,Suitable for industrial temperature measurement..

Dual infrared and thermocouple thermometer for noncontact or contact temperature measurement in HVAC/R systems and manufacturing, electrical, and industrial environments.
Measures temperature from 40 to Plus-550 degrees C ( 40 to Plus-1022 degrees F) with an accuracy of plus or 1 degree C (plus or 2 degrees F) for the infrared sensor and an accuracy of plus or 2 degrees C (plus or 4 degrees F) or 1 percent of the reading, whichever is greater, for type K thermocouple input.
12:1 infrared distance to spot ratio with laser sighting for pinpointing the measurement area.
Included type K thermocouple pipe probe wrapped in flexible hook and loop fastener with a 20 inch cable takes contact measurements from 0 to 100 degrees C (32 to 212 degrees F).
CE mark indicates compliance with applicable EU directives.

☆The head of thermocouple is fixed thread, need to be compared that it is suitable for your heater before purchasing the product..
☆Made of high-standard brass and red copper,and ABS materials, during operation, you need to hold the valve for 5-10 seconds and then thermocouple will start work..
☆Suitable for Propane gas heaters with Thermoelectric Safety, such as room gas heater, outdoor patio heater and other Thermoelectric gas products..
☆The thermocouple is easy to install. The probe is connected to the ignition device, the thermocouple is connected to the valve, and the other two ports are connected to the safety dumping switch, which does not require special tools and is prefect compatible for the original part..
☆The safety tipping switch will automatically stop the heater when the heater is tilted or dropped, which can prevent the occurrence of gas leakage when the fire is extinguished and the gas is still on, which is more secure. Suitable for weak dump switches with gas R ≤ 10mΩ..

K-type Thermocouple Thermometer with handheld High Temperature Surface Probe SF-1.
Measure Surface Temperature up to 932 °F or 500 °C, NOTE: Thermometer displays up to 1999 degreeF, but 1300 °C.
LCD display: 3 1/2 digits , easy switch between °F and °C.
Miniature k-type thermocouple connector allows the use with a wide range of other thermocouples.
Accuracy: 1.5°C or 0.4% , Data Hold, Battery: 9V (included!).

Digital k-type thermometer with one input and extra thermocouple PK-1000.
Temperature Range: -58.0 to 1999.0 °F (-50.0 to 1300.0 °C).
Resolution: 0.1°F or °C or K Accuracy: 2.2° or 0.75% Data Hold.
Comes with k-type thermocouple wire probe that measures up to 1832 degree fahrenheit (1000 degree Celsius).
Battery: 9V (included!) Dimensions: 6" x 3" x 1.5" (149 x 71 x 41 mm) Weight: 7 oz (200 g).

Thermocouple thermometer for use in applications requiring a broad range of temperatures, including furnaces, kilns, freezers, and other industrial applications.
Measures temperature from -200 to 1370 degrees C (-328 to 2498 degrees F), with an accuracy of + or - 0.2 degrees C.
Type K thermocouple probe with 4-foot cable.
Minimum/maximum memory and 24-hour countdown timer for long-term temperature monitoring.
Calibrated to ISO 17025 traceability standards for reliability of measurements.

Operating temperature: -40 ~ 572°F (-40 ~ 300 °C) , Accuracy: +/-1.5°F, 0.4%.
Probe Type: Sledgehammer, Diameter : 63mm , Weight: 18 lb (822g) High grade 316L Stainless steel metal, K-Type Thermocouple Probe , Polytetrafluoroethylene (PTFE) Insulator.
Wire Length : 39" (1 m) , Connector: K-Type Flat Shape Male.
Application: Plane surface temperature for Teppanyaki , Flat Frying Pan.

Operating temperature: -40 ~ 752°F (-40 ~ 400 °C) , Accuracy: +/-1.5°F, 0.4%.
Probe Type: Open hole clip, Length: 60mm, Diameter : 6.35mm , High grade 316L Stainless steel metal, K-Type Thermocouple Probe.
Wire Length : 43" (1.1m) , Connector: K-Type Flat Shape Male.
Application: This product is suitable for the detection of oven and air temperature.

This thermocouple and tilt switch kit is to fix the problem that the pilot light or flame does NOT stay lit, or the thermocouple is broken..
The safety dump switch will automatically stop the heater when it's tilted or dropped, prevent the occurrence of gas leakage when the fire is extinguished and the gas is still on, which is more secure..
Easy to install, just connect the probe to the ignition device, the thermocouple to the valve, and the other two ports to the safety dumping switch..
Works with propane gas patio heater, outdoor standing patio heater, pyramid-style tower heater, fire sense heater, dome-style heater, tabletop heater, Amazonbasics heater, Hampton Bay patio heater, Lowes patio heater, etc..
Thermocouple wire total 350mm with temperature resistance sleeves, with threaded M8*1 and M6. Suitable for weak dump switches with gas R ≤ 10mΩ. Please check the compatibility before purchasing this product..