ReviewsThermostat Flange

FireplaceBlowersOnline FK24 Fireplace Blower kit for Majestic Martin Northern Flame Temco Vermont Castings CFM Rotom HB-RB65 | Ball Bearing Quiet High Air Flow

  • Kit includes ball bearing blower, 3-prong power cord, rheostat, thermostat, galvanized mounting bracket, noise reduction padding and installation....
  • Comes fully assembled and pre-wired. Easy DIY installation. Instructions included. 1 year comprehensive warranty. Assembled and tested in Racine, WI....
  • Total Length = 12.5" Width = 3.23" Height = 3.73" Flange Opening = 9 1/2" | 130 CFM, 3000 RPM, 120 Volts, 0.86 Amps, 35 Watts, CW Rotation, 120° /....
  • High Quality Sealed Ball Bearing Motor - Powerful, Quiet, Superbly Balanced, Energy Efficient and Long Lasting.
  • Does it fit your fireplace? See our compatibility chart in description. Makes for an excellent universal fit blower kit! If you don't see your model....
Check Stock

Cool Attic CX1500UPS Power Gable Ventilator Fan

  • VENTILATOR FAN: This is a 1300 CFM Power Attic Gable Mount Ventilator with a 2.6 Amp thermally protected motor, a galvanized steel flange, and an automatic thermostat.
  • GABLE MOUNT FAN: It mounts easily in the gable of your home, behind existing louvers or any other gable louvers of your choice. It will provide ventilation without modifying your roofline, or where roof-mounting is impractical. It mounts easily in gable behind louvers.
  • ATTIC FAN: The Cool Attic Gable-Mount Attic Ventilator Fan offers effective power attic ventilation to reduce heat buildup, equalize temperatures inside and outside the attic. It has 14-inch fan with 600-square-inch intake. It is galvanized steel construction.
  • EASY INSTALLATION: It cools attic up to 1,850 square feet and 3.4-amp, 115-volt, 60-Hz thermally protected motor, 1,300 CFM rating at 0.03 static pressure when used with model No. CX2121 automatic shutter. It helps keep your home cooler and reduce utility costs.
  • HOME ROOF COOLING FAN: This fan helps prevent weather-induced home deterioration and make living areas more comfortable – all while helping reduce the operating cost of air conditioning. Easy to install with no holes in roof.
Check Stock

Hongso GZ550 Replacement Fireplace Blower Fan KIT for Continental, Napoleon, Rotom HB-RB58

  • Includes blower fan unit, 3-prong power cord, connecting wire, rheostat & thermostat, galvanized mounting bracket, noise reduction padding & installation instructions. Wall switch for blower NOT REQUIRED.
  • Blower total Length = 9.75" Width = 3.73" Height = 3.23" Flange Opening = 7". Insulation: Class H (rated to 392F / 200C), Motor RPM: 2500, Airflow in C.F.M: 125, Volts: 120, 0.6 Amps, Frequency (hertz): 60, Power Consumption (watts): 31, Certifications: Motor UL Approved.
  • Cross Reference Numbers: Blower only, GZ550, GZ552, HB-RB58, R7-RB58, P58L180, GD36NTR.
  • Durable Replacement Fireplace / Stove Blower Fan Kit for Continental Napoleon Rotom and other brands. Fits Continental Fireplaces: CDV33, CDV34, CDV36, BCDV40, BCDV42, BCDV48, CDV70, BCNV36, BCNV40, BCNV42, CVF42.
  • Benefits: Helps reduce costly energy bills, Heats large rooms efficiently, Installs quickly and easily with included instructions, Reasonable price aftermarket parts..
  • NOTE: The "Fits" BRAND and MODEL # Listed below are Reference ONLY! Make sure you measure the size of your original blowers and compare with the replacements BEFORE you order.
Check Stock

Nenesupply 19mm Flange Insert Compatible with Elvie Flange Pump Parts Elvie Stride Flange Medela Spectra Momcozy Flange Willow Reduce 24mm to 19mm Use as Elvie Inserts Medela Insert Momcozy Insert

  • CONTENT: 2pc 19mm NENESUPPLY Silicone Flange Inserts compatible with 24mm of Elvie flange, Elvie Stride flange, Momcozy flange, Medela flange (Personalfit Flex and Freestyle Hands-Free), Spectra flange, Willow flange, Willow Go flange, and Motif Luna flange. Reduce 24mm to 19mm. MADE BY NENESUPPLY. Compatible with Elvie pump parts accessories and Willow pump parts..
  • COMPATIBLE PUMPS: Work with 24mm FLANGES of most breast pumps in the market. See product photo for illustrations..
  • AVAILABLE IN 15, 17, 19, 21mm. MADE FROM SOFT SILICONE: Soft silicone makes pumping more comfortable. Reduce flange funnel to 19mm. Suitable for moms with smaller nipples. Correct flange sizes make pumping more efficient..
  • NO LOSS OF SUCTION- Embeded sealing circles creates a complete seal. EASY TO INSTALL & REMOVE - Easy to push in and pull out the inserts. Hassle-free.
  • EASY TO CLEAN: Dishwasher safe (top rack only). BPA and DEHP Free. FDA compliant for food contacts. Made by FDA regulation compliant manufacturer..
Check Stock

Maxx Air Professional Grade Gable Mount Power Attic Ventilator with 2.6-Amp 60-Hz Motor and 14-Inch Blade

  • VENTILATOR FAN: This is a 1300 CFM Power Attic Gable Mount Ventilator with a 2.6 Amp thermally protected motor, a galvanized steel flange, and an automatic thermostat..
  • GABLE MOUNT ATTIC FAN: It mounts easily in the gable of your home, behind existing louvers or any other gable louvers of your choice. It will provide ventilation without modifying your roofline, or where roof-mounting is impractical..
  • ATTIC FAN: The Cool Attic Gable-Mount Attic Ventilator Fan offers effective power attic ventilation to reduce heat buildup, equalize temperatures inside and outside the attic. It has 14-inch fan with 600-square-inch intake. It is galvanized steel construction..
  • EASY INSTALLATION: It cools attic up to 1,850 square feet with a 2.6-amp, 115-volt, 60-Hz thermally protected motor, 1,300 CFM rating at 0.03 static pressure when used with model No. CX2121 automatic shutter. It helps keep your home cooler and reduce utility costs..
  • HOME ROOF COOLING FAN: This fan helps prevent weather-induced home deterioration and make living areas more comfortable - all while helping reduce the operating cost of air conditioning. Easy to install with no holes in roof required..
Check Stock

bliblo Flange Insert 19mm Suitable for Momcozy S9/S10/S12,Wearable Breast Pump Shield/Flange Insert，Milk Collector 24mm Universal (19mm)

  • Bliblo Flange Insert 19mm, wearable breast pump flange suitable for almost any wearable breast pump, for example S9/S10/S12 breast pump. Milk Collector 24mm common use. 3 Piece Set.
  • Easy Cleaning, wash the accessories with warm soapy water everytime after using..
  • Flange Insert 19mm：made of food grade silicone material. Can be sanitized with water steam, boiling water or microwave-steam bags. Furthermore, flange Insert are 100% BPA free..
  • Mothers will experience nipples swelling during breastfeeding, therefore nipples might be uncomfortable. Nipples Rubbing or feeling flattened in the flange tunnel, or oversize flange will cause the amount of breast milk falls. Therefore, it is important to observe the appearance of the nipples during breastfeeding. Suitable flange inserts for breast pumping will be more comfortable and efficient. Please choose a flange with a suitable size..
Check Stock

acylph Exhaust Oval Flange QuickFix Repair Pipe Kit w/Gasket & Hardware Universal 2.25" ID 2 Bolts

  • Designed to replace both sides of the flange connection.
  • This exhaust flange for high quality and accurate assembly for all your custom exhaust needs..
  • Application: Universal fit application for mostly any car..
Check Stock

11537549476 Engine Coolant Thermostat W/Housing Compatible with BMW E92 E82 E60 135i 128i 320i 325i Z4 328i 335i 335is Replace 11537544788, 11537536655, 1430826, 256201, 41008697D0 Black

  • Advanced Features: The automatic thermostat is an important part of the car cooling system, it can help you heat the engine to running temperature as quickly as possible, and keep the engine at an optimal temperature throughout drive.
  • Replacement OEM Part: 11537549476, 11537544788, 11537536655, 1430826, 256201, 256202, 41008697D0, QTH640K, TM1497, TH39797, TH698497J, V20991277, 41008697D0, 11-53-7-549-476, G4002-282254.
  • Replace Worn Thermostat, Thermostat Assembly for Bmw: Compatible with BMW E61 E60 535i 535xi 530i 530xi 525i 525xi, E83 X3, E82 E88 128i 135i 135is 1M, E85 E86 E89 Z4, E90 E91 E92 E93 323i 328i 328xi 325i 325xi 335i 330xi 335is 335xi, relpace 335is thermostat 335xi thermostat 535i thermostat 535xi thermostat.
  • Good quality of Engine Coolant Thermostat W/Housing Assembly: Use high-quality materials, improve performance, improve durability and tolerances. stable characteristics, high reliability, better help you repair leaking thermostat housings, and correct engine overheating caused by thermostat failure.
  • Function of The 2008 for Bmw 328i Aluminum Thermostat: Th....
Check Stock

Maxx Air Professional Grade Gable Mount Power Attic Ventilator, Premium Attic Ventilation for Gable, Home, Shed, Portable Building (2500 Sq. Feet, Green)

  • VENTILATOR FAN: This is a 1650 CFM Power Attic Gable Mount Ventilator with a 2.6 Amp thermally protected motor, a galvanized steel flange, and an automatic thermostat..
  • GABLE MOUNT ATTIC FAN: It mounts easily in the gable of your home, behind existing louvers or any other gable louvers of your choice. It will provide ventilation without modifying your roofline, or where roof-mounting is impractical..
  • ATTIC FAN: The Cool Attic Gable-Mount Attic Ventilator Fan offers effective power attic ventilation to reduce heat buildup, equalize temperatures inside and outside the attic. It has 14-inch fan with 600-square-inch intake. It is galvanized steel construction..
  • EASY INSTALLATION: It cools attic up to 2,500 square feet with a 2.6-amp, 115-volt, 60-Hz thermally protected motor, 1,300 CFM rating at 0.03 static pressure when used with model No. CX2121 automatic shutter. It helps keep your home cooler and reduce utility costs..
  • HOME ROOF COOLING FAN: This fan helps make living areas more comfortable while helping reduce the operating cost of air conditioning. Easy to install with no holes in roof required..
Check Stock

Quick Fix Exhaust Flange,Exhaust Flange Spring Bolt Repair Pipe Kit Quick Fix 2.25in ID to 2.25in OD Universal Stainless

  • Brilliant Compatibility:Exhaust Flange Spring Bolt Repair Pipe Kit,universal for most vehicles and can repair your car very well and effectively.2.25in ID to 2.25in OD exhaust spring bolt flange, used for connection between pipe ends..
  • Stainless Steel Material:Quick Fix 2.25in Exhaust Flange Made of high quality stainless steel material for perfect durability and strength, not easy to deform, has long service life..
  • Easy to Use:Exhaust Flex Spring Flange Easy to use with equipped springs and bolts, wonderful replacement for the previous old or broken one.Built to meet standard specification, strictly follow factory quality control..
  • Feature:Universal Exhaust Flange,Quick fix flange repair pipeline assembly, which meets strict quality control standards and can be used reliably..
  • Standard Specification:Exhaust Spring Bolt Flange Conform to strict quality control standards, dependable to use.Manufactured according to the original specifications..
Check Stock

BLACKHORSE-RACING 3' Vband 90 Degree Elbow Adapter Flange Kit to T4 Turbo 304 Stainless Steel Cast

  • ▲ 304 Stainless Steel Cast and Machined Adapter, with Tight Radius. Works for Many Turbo Applications. Vband Flange Allows Rotation of the Turbo At Any Angle. Flange Is Threaded with 4 M10x1.5 Holes.
  • ▲ Cast Turbo Elbow Adapter + Vband Flange and Clamp Kit, One Pair. T4 to 3" V-Band.
  • ▲ Flange Is Threaded with 4 M10x1.5 Holes, T4 Turbo Flange (to Turbo Side).
  • ▲ 3" Vband Flange (to Header/Manifold Side).
  • ▲ Thanks for your encouraging review and feedback! It really increases our service level and passion of work! Incase you meet problem with our products, please contact us first before you give feedback and review. We will assure you will get the best solution and service..
Check Stock