ReviewsThick Gold Pcb

Miriu RJ45 Ethernet Splitter Cable Minriu RJ45 Y Splitter Adapter 1 to 3 Port Ethernet Switch Adapter Cable for CAT 5CAT 6CAT 7 Black

  • ★Multi-Function: You can easily convert the RJ45 connection to two RJ45 sockets, allowing two computers to share high-speed DSL, cable modem and....
  • ★The BEST Design: This ethernet female to female splitter adapter lan cable solves the problem of avoiding pulling cables back and forth. Compatible....
  • ★Good Quality Materials: 2mm Thick PCB board is embedded in the conductive circuit to avoid damage to the conductor and leakage. Ensure a longer....
  • ★Pure Copper Gold-Plated Needle with Eight Cores: Excellent connection and transmission performance. The fixed RJ45 female interface can shield....
  • ★Service Guarantee: 36-month warranty,60 day return without any reasons,If you have any problems please do not hesitate to contact us, we promise to....
Check Stock

GLORIOUS Keyboard Stabilizer GSV2 Kit for Mechanical Keyboards, Gold Wire and Premium Polymer, MX Compatible, Easy Screw-in, PCB Mount, Enhanced Sound on GMMK 2, PRO & Numpad (2u, 6.25u, and 7u)

  • ⭐ Set of 7 Stabs: Comes with 5 x 2u stabilizers, 1 x 6.25u stabilizers, 1 x 7u stabilizer, gold-plated wires, 12 screws, and 12 washers.y material.
  • ⭐ Easy Installation: Simply remove pre-installed stabilizers and screw in GSV2 stabilizers into your board’s compatible PCB. NO CLIPPING NEEDED. Follow our detailed guide on the Glorious website..
  • ⭐ Unlubed: GSV2 stabilizers feature no pre-applied lube, letting you lube them to your preference. Combine it with our G-Lube for best results..
  • ⭐Wide Compatibility: Made with MX-Compatible Stems. Fits most third-party mechanical keyboards with PCB-mount stabilizer support. Designed for GMMK PRO, GMMK 2, and GMMK Numpad, but fits on.
  • ⭐ Premium Materials: Made with high-quality polymer and gold-plated wires, GSV2 keyboard stabilizers create a smooth press without ping or scratchiness..
Check Stock

ADT-Link R44SF / R24SF M.2 NVMe SSD Extension Cable Solid State Drive Riser Card Support M2 to PCI Express 3.0 X4 PCIE Full Speed 35G/BPS(R24SF 10CM)

  • Wire advantages: Using the German patent imported wire, using the Lotes connectors which imported from Taiwan, high frequency support PCIe 3.0 X16 8G/bps stable transfer..
  • Cable length: Our wire has a low impedance, the cable below 60cm can be stable at PCIe3.0 full speed reading and writing..
  • Differential signal without hole design, there is no problem of signal attenuation interference in a parasitic capacitance and parasitic inductance, there will be no more CAF micro short circuit, cable is durability..
  • PCB use high frequency low resistance of materials with high quality, PCB using high TG board, copper thickness thicken to 1oz, gold finger plating enough gold, Good conductive performance, can reduce oxidize higher impedance caused by the crash blue screen..
  • R24SF ,Connector 1: PCIe x4 ,Connector 2: M.2 NVMe SSD.
Check Stock

YIMAGUJRX RUNJRX Keyboard Switch Pads Poron Foam for 61/64/87/100/104/108 Hot Swap Keyboard 120Pcs

  • 【FUNCTION】It is a new project to update the keyboard by filling the gap between the switch and the pcb, reducing vibrations and typing sounds..
  • 【CHARACTERISTICS】We customize the bottom of the material has a layer of film plus non-stick adhesive backing will be more resistant to tearing, support repeatedly tear off and then stick on..
  • 【SET MATCHING】You can place the Keyboard switch pads directly on the PCB with tweezers without disassembling the keyboard..
  • 【MATERIAL】Made of 0.5mm thick Poron high-density memory foam..
  • 【PACKAGE INCLUDES】Keyboard switch pads*120 x 1 , Tweezers x 1..
Check Stock

ZugGear V2 PCB Mount Screw-in Stabilizers Translucent Smokey Gold Plated 2u 6.25u 7u Keycap Stabilizers Mechanical Keyboard Stabilizers (DUROCK V2 Smokey 60/87 Kit)

  • DUROCK V2 PCB Mount Stabilizers are with NEW Non-Stripping Wire Design, fits for MX-compatible PCBs..
  • The V2 Outer Casing wire holding clasp made to prevent stripping of the wires, different from regular Cherry PCB mount stabilizers and others..
  • Translucent Smokey housings and the Golden Wires set gives your board a clear and golden edge..
  • Polymer Nylon outer Casing-- Higher Hardness, Gold-plated Stainless Steel Wires and Screws-- Oxidation Resistance..
  • Pre-clipped Insert method, no need to clip the feet. Fit for 60% and 80% Keyboard Set. ( Washers, 6.25u and 7u Wire included ).
Check Stock

ZugGear V1 Translucent Smokey Gold Plated PCB Screw-in Stabilizers 2u 6.25u 7u Keycap Stabilizers Mechanical Keyboard Screw Stabilizers DUROCK V1 Smokey 60/87 Keyboard Set

  • 1. DUROCK PCB Mount Stabilizers are designed for MX-compatible PCBs..
  • 2. Translucent Smokey housings and the Golden Wires set gives your board a clear and golden edge..
  • 3. The outer casing and parts, specifically made to prevent stripping of the threads, different from regular Cherry PCB mount stabilizers..
  • 4. Polymer Nylon outer Casing-- Higher Hardness, Gold-plated Stainless Steel Wires and Screws-- Oxidation Resistance..
  • 5. Pre-clipped Insert method, no need to clip the feet. Fit for 60 Keyboard Set,87 Keyboard Set and 104 Keyboard Set. ( Both 6.25u and 7u Wire....
Check Stock

ukiism RJ45 Network 1 to 2 Port Ethernet Adapter Splitter, RJ45 1 Male to 2 Female LAN Ethernet Splitter Adapter Cable Suitable Super Cat5, Cat5e, Cat6, Cat7 LAN Ethernet Socket Connector Adapter

  • ...ng an RJ 45 socket to two standard 8P8C designs..
  • This RJ45 1 to 2 RJ45 Ethernet splitter helps you avoid pulling cables back and forth and avoiding cable breaks.It can also be used as an extension, it is made of high quality materials and has a smooth transmission.It can compatible with Cat5, Cat5e, Cat6, Cat7..
  • 2mm thick PCB board embedded conductive circuit to avoid damage to the conductor leakage. Ensure a longer service life.Pure copper plated gold needle (eight core): more stable transmission, excellent connection and transmission. The fixed RJ45 female interface shields external electromagnetic signal interference to prevent damage to the Internet signal.Transmission is more stable, it has a superior connection and transmission.The screw hole panel can be fixed to the wall panel..
  • Solve the router port number is not enough:This adapter Advantage Design: A notebook in three different fixed position often back and forth use, this is a very trouble, the network cable to lead to broken, this rj45 1 to 2 ways RJ45 ethernet splitter help you do not have to pull back and forth cable..
  • NOTE: This is a high quality product with PCB board inside. But Beware that Ethernet splitter will not make two Ethernet ports from one, meaning that you cannot use two com....
Check Stock

RJ45 Ethernet Splitter Cable Connector 1 Male to 2 Female LAN Port Support Cat7 Cat6 Internet Cable with High Speed Network

  • It DOES NOT supply an Ethernet signal to two computers at the same time, rather, it allows you to SWITCH between the two.
  • RJ45 1 to 2 RJ45 Ethernet splitter helps you avoid pulling cables back and forth to avoide cable breaks. It can also be used as an extension, smooth transmission and compatible with Cat5, Cat5e, Cat6, Cat7.
  • Convert an rj45 connection to two RJ45 sockets, Allows two computers to share high-speed DSL, cable modems and Ethernet ports without the need for a router, extending an RJ45 socket to two standard 8P8C designs.
  • Built-in 2mm thick PCB board conductive circuit to avoid damage the conductor leakage. Pure copper plated gold needle (eight core) for stable transmission.
  • Solve the lack of Router port problem and the network cable to lead broken if laptop in different position to use and need to pull back and forth cable.
Check Stock

Thermaltake Pacific V-GTX 10 1080/1070 Nickel Full Cover Transparent GPU Water Block, Clear CL-W134-CU00TR-A

  • Compatible with NVIDIA GTX 1080 founders Edition and GTX 1070 founders Edition graphic cards.
  • Transparent design: Offering a Transparent full cover water block for ideal coolant viewing and proper protection of PCB components.
  • Copper cold plate: nickel plated copper cold plate provides exceptional cooling performance and protection.
  • Micro-channel structure: featuring 0.5mm micro-channel fin construction for extreme heat dissipation.
  • Back plate included: gain proper protection to the back of the PCB with a custom 4mm thick aluminum alloy back plate..
Check Stock

Gikfun Large Solder-able Breadboard Gold Plated Finish Proto Board PCB DIY Kit for Arduino GK1008

  • It is the Large Gikfun Solder-able Breadboard.
  • This board is especially useful for preserving a prototype or experiment you just created on a solderless breadboard by soldering all the pieces in place.
  • Gold plated finish prevents oxidation, High quality Gold finish for easy soldering.
  • All holes are through-plated for strength.
  • Pack of 3PCS, Breadboard PCB for any type Raspberry Pi GPIO.
Check Stock

Homyl Transparent Gold Plated PCB Screw-in Stabilizers 2U 6.25U Keycap Stabilizers for MX Mechanical Keyboard Cherry 1 Set Replacement - Pink 1 6.25u 7 2U

  • * Pre-clipped Insert method, no need to clip the feet. Fit for 104/108 Keyboard Set. ( 1pc 6.25u 7pcs 2U Wire included ) / Fit for 61 Keyboard Set and 87 Keyboard Set. ( 1pc 6.25u and 4pcs 2U ).
  • * PCB Screw-in Mount Stabilizers are designed for MX-compatible PCBs..
  • * Polymer Nylon outer Casing :Higher Hardness, Gold-plated Stainless Steel Wires and Screws-- Oxidation Resistance..
  • * The outer casing and parts, specifically made to prevent stripping of the threads, different from regular Cherry PCB mount stabilizers..
  • * Transparent housings and the Golden Wires set gives your board a clear and golden edge..
Check Stock