ReviewsThread Adaptor

RV Winterize Blowout Adapter, Blowout Adapter for Winterizing with 1/4 Inch Quick Connecting Plug and 3/4 Inch Garden Water Hose Threading, RV Winterizing Kit with Ball Valve for RV Boat Camper

  • ...ng use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose.
  • classAcustoms 12 VOLT Fresh Water Pump MODEL # 12V3 - FRESH WATER USE ONLY - OPEN FLOW 11.6LPM / 3.0GPM AMPS 4.0A MAX AMPS 8.0A SHUT OFF PRESSURE 45PSI/3.1 Bar ON-DEMAND PUMP only turns on when senses pressure changes in line 12 VOLT POWER ONLY 110/115/220 volt will damage the unit - READ INSTRUCTION BOOKLER BEFORE INSTALLATION.
Check Stock

Ultimate Washer UW16-PA75B8 High Pressure Chemical Injector, 8.0 GPM, 3500 PSI, Brass

  • Includes: Adjustable Injector Metering Valve, Tubing and Filter.
  • Brass Adaptor with Standard Garden Hose Fitting by 1/2-inch Male Pipe Thread.
  • Connects Between Garden Hose and High Pressure Pump.
Check Stock

Juki 1-Needle, 3-Thread Overlock Machine MO-623

  • No need to change needle plate to convert to rolled hem, its built in!.
  • Adjustable Stitch Length and Cutting Width.
Check Stock

Ciglow Irrigation Venturi Fertilizer Injectors, Garden Irrigation Device Kit G3/4 Fertilizer Injector + Switch + Filter + Water Tube

  • Includes: Adjustable Injector Metering Valve, Tubing and Filter.
  • Brass Adaptor with Standard Garden Hose Fitting by 1/2-inch Male Pipe Thread.
  • Connects Between Garden Hose and High Pressure Pump.
Check Stock

Garden hose to shower pipe/arm handshower adapter,G1/2 Female to GHT 3/4 adapter

  • 【1/2 IPS Female】1/2 IPS which is also name G1/2 is the thread type of handheld showerhead, shower arm and shower pipe. therefore, the internal thread side adapters hand shower and shower arm.
  • 【3/4 GHT Male】Standard garden hose thread, connecting to garden hose, washer water inlet hose, and dishwasher water hose,etc.
  • 【RUBBER WASHER】comes with rubber washer for better seal.
  • 【ALL BRASS】adaptor built with solid brass that never rust.
Check Stock

10AN to 8AN Male Flare Reducer Hose Fitting Adapter Fuel Line AN10 to AN8 Reducing Aluminum Pipe Union Connector Black

  • JIC -8 AN (3/4-16) male to 10 AN male flare thread reducer / expander hose tube adaptor, straight.
  • Made of High Performance Lightweight 6061-T6 CNC Machined Billet Aluminum Material.
  • Black Anodized Finish for Long Last, Strength and Durability.
  • These fittings are designed to match up with common hose and hose ends, They assure positive sealing and come in a corrosion-resistant finish.
  • Adapters 10an to 8an are offered in standard thread, metric thread and pipe thread to fit most popular oil pumps, fuel pumps, fuel filters plus a....
Check Stock

AC PERFORMANCE Aluminum 3 Ways 1/8 NPT Female Thread Pipe Tee Converter Tube Hose Fitting Adapters Black

  • Size: 1/8" NPT female thread 3 way T shape equal hose tee, 1/8" NPT to 1/8" NPT coupling adapters.
  • Manufactured of high performance lightweight 6061-T6 cnc machined billet aluminum.
  • Surface treatment: black anodized finish for durability and strength.
  • Allows you to connect three lines, or add a branch to a line. Precision machined to exacting tolerances for trouble-free performance.
  • Tee style adaptor has three openings-- the "run" across the top is 1/8" female pipe thread on each end, and the "branch" is 1/8" female pipe thread as well.
Check Stock

R12/R22/502/R290/R600a Premium Recharge Hose #3313

  • [WIDE APPLICATION] The R12 AC flow control valve adapter fits for R12 R22 air conditioner manifold with 1/4" Male to 1/4" Female. The R410 Refrigerant....
  • [FUNCTION] The valve has the adjustable opening function for convenient use..
  • [DESIGN] The R12 refrigeration charging safety adaptor with 1/4" SAE and 1/4" Female Thread. The R410 refrigeration charging safety adaptor with 1/4"....
  • [PREMIUM QUALITY] The R12 R22 R410 control valve adapter is made of high quality brass material, with high strength and durable to use..
  • [SERVICE GURANTEE] Package include: 1Pc x R12 R22 Refrigerant Charging Valve(Blue). 1Pc x R410 Refrigerant Charging Valve(Red). If you have any other....
Check Stock

DCT 4in Plastic Pipe Threaded Quick Connect Adaptor Coupler 1-Pack, Flexible Hose Woodshop Saw Dust Collection

  • WOODSHOP DUST CONTROL: Use the DCT 4” Inch Plastic Pipe Threaded Quick Connect Adaptor Coupler 1-Pack, Flexible Hose Woodshop Saw Dust Collection to complete your woodshop dust control system by connecting 2 shorter pieces of 4-inch (10.2cm) plastic pipe into one longer pipe for ductwork dust collection.
  • Threaded quick connect adaptor end screws tightly into flexible hose and tapered end offers press-on attachment.
  • HASSLE-FREE: Eliminates the need to connect and disconnect a hose clamp each time a new woodworking machine is used.
  • Takes all of the work out of disconnecting and moving or switching from machine to machine.
  • Stays secure and airtight without sliding off, decreasing airflow, or decreasing dust collection capability.
  • No special adapters for each tool required.
  • EASY TO USE: Designed to quick connect thread onto to the end of a 4-Inch flexible dust collection hose (can be tightened with wire hose clamp.
  • not included) and slide onto any 4-Inch diameter dust hood port, blast gate, the dust collector itself, or the outlet of whichever tool you are using at the time for a quick and easy fit (twist for friction lock).
  • SPECIFICATIONS: Constructed from heavy-duty hard plastic.
  • 1/8-inch (3mm) quick adaptor coupling thickness.
Check Stock

Cen-Tec Systems 92014 Universal Extension Vacuum Hose, 20 feet

  • The 92014 is designed to add 20 feet of highly flexible hose length to the hose on your canister or upright.
  • The hose has a 1 ¼” inner diameter and is 20 feet long. The hose will transfer the power of your vacuum without losing power due to its smooth inner diameter..
  • The 92014 is equipped with a unique compression adaptor that will grab on to the curved end on your can¬ister or upright vacuum hose and add the necessary hose length to clean a complete flight of stairs with the vacuum resting safely on the ground. If you own a Hoover vacuum with the unique pin system simply take the compression fitting off and thread on the Hoover adaptor..
  • The 92014 hose comes with two different hose ends to match with your accessories. Typically North Ameri¬can brands used 1.25” accessories while many European brands were designed for use with 1.375” accesso¬ries. The 92014 comes with alternative swivel wand fittings that allow you to match to either or both size of accessories..
  • The flexibility to adaptor to your vacuum by simply adjusting the ends allows the extension hose to work with most popular brands of canisters and upright vacuums including Hoover, Eureka, Bissell, Miele, Royal, Oreck, Sharp, Riccar, Simplicity, Kirby, and Kenmore.
Check Stock

XtremeAmazing Universal Manual Transmission Shift Knob Shifter Adapter M12×1.25 with 8mm 9.5mm 10mm 12mm Adaptor

  • Shift knob adapter thread size : M12x1.25, Inner diameter:16mm/0.63'',Outer diameter: 21mm/0.83''.
  • 4Pcs Adaptor inner diameter: 8mm 9.5mm 10mm 12mm.
  • Compatible with most cars, such as BMW Honda Acura Infiniti Lexus Mazda Mitsubishi Nissan Scion Toyota Dodge Magnum Ford Hyundai VW Magnum Ford Hyundai VW and and so on..
  • Package Contents: 1 x Black Shifter adapter, 8 x Screws, 1 x Hex key, 4 x Adaptor(8mm 9.5mm 10mm 12mm).
Check Stock