ReviewsThread Ball Valves

TOCHUN 75mm IBC Tote Tank Adapter Ball Valve -Heavy Duty S75X6 Coarse Thread Ball Valves Connector for Water Liquid Container NPT DN50

75mm (DN50) Ball Valve- Versatile as chemical process and acid, liquid storage buckets, tanks, container outlet control valves. This IBC tote adapter comes with coarse S75x6 thread with a diameter of 2.95 inches (75mm) . Please note that this IBC tote fitting is coarse thread with 6 mm pitch (distance between the threads)., NOT fine thread.Please check before purchase..
DURABLE and HEAVY DUTY-Made of premium plastic materialc and high density polyethylene, this adapter is acid and alkali resistant. It can be used for 3500 times repeatedly. Super durable for long time use..
QUICK and EASY INSTALLATION-Come as completed adapter. Just connect to the IBC/Water tank and you can Use it..
VERSATILE and NO-LEAKAGE-used for plastic container outlet control to prevent liquid from splashing around. Supported by strong silicone gasket, never worried about leakage..
Packet Included: 1x Assembled DN50(75MM) Ball Valve, 1 year warranty.

Check Stock

AOMAG 3/8" Electric Solenoid Valve 12V DC, VITON Gasket, Air, Gas, Fuel Normally Closed

-NEW- Re-engineered low power coil with up to 50% less heat generation. The valve starts as 19W and as it heat up to operating temperature power reduces to approx. 10-13W..
1/4" NPT (USA National Pipe Thread). Commonly used standard pipe thread in US...
PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 6 hours in a single cycle.
to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our AOMAG Motorized Ball Valves..

Check Stock

TOCHUN IBC Tote Butterfly Valve DN50 -Heavy Duty 75mm Taps Drain Connector for Water RainWater Tank-IBC Fittings Garden Irrigation Valve

【75MM IBC TOTE VALVE】Specially Emphasis that this IBC tote adapter is a coarse S75x6 thread with the diameter of 2.95 inches (75mm) and the thread pitch of 0.19 inches (5mm). The diameter of Tote Tank Drain Cover is 60mm/2.36″ (Note: This is Coarse Thread not Fine Thread, please check before purchasing)..
【PREMIUM QUALITY IBC TOTE ADAPTER】The IBC tote valve introduces foreign technology, made of high-density polyethylene and other engineering plastics. It is assembled with novel structure and beautiful appearance. It has been used safely for 3,000 times and passed the drop test..
【SAVE TIME AND ENERGY】This IBC tote fitting is easy to install,just connect to the Water tank and you can Use it. The water tank adapter supplied with superior quality silicone gasket, which can effectively to prevent liquid from splashing around. Super durable and can be used repeatedly that perfectly save you time and money!.
【REPLACEMENT TOTE WATER TANK ADAPTER】This IBC tote valve is mostly used for chemical process and acid, liquid storage buckets, and tanks outlet control valves to prevent liquid leakage. This IBC tote fitting has the advantages of anti-corrosion, acid and alkali resistance, durable, high mechanical strength, easy opening and so on..

Check Stock

QWORK Stainless Steel Floating Ball Float Valves 1/2 inch DN15 Adjustable Male Thread Water Float Sensor Hydraulics, Pneumatics & Plumbingall

Float valves use a rod and float ball attached to a valve shutoff lever to control.
Floating Ball Material: 304 Stainless Steel.
Designed with G1/2 inch thread that is normally used, can fit many pipe connection.
This float valve has a high-temperature rubber seal, durable to aging for long time use for better sealing and makes sure no leaking.
Widely used in magnetic level switch and liquid level measurements.

Check Stock

Othmro 5Pcs Threaded Ball Knobs, 1.97Inch Dia 0.47Inch Thread M12 Female Thread Black Bakelite Handle Thermoset Ball Knob for Lawn Mowers Exercise Equipment Machinery Valves Spigots (M12x50)

【Feature】-The Ball knob Injection molding,Bakelite material, feels good.
Tightly molded-in insert insures optimal durability and functionality.
The round smooth surface gives a dressed-up finished appearance. Ideal lever knob for machine handles.
【Hight Quality】-The handle is made with premium quality and has excellent electrical insulation,oil resistance,weak acid resistance,alkali resistance and general solvent resistance,and has excellent mechanical properties such as toughness,rigidity,good rigidity and balance.
【Easy operation】-This Bakelite hand Knob is easy to install and remove and does not require any tools.
【Application】-Ultra-solid ball knob with a Shiny finish, suitable for general application,such as control levers and push-pull rods,lawn mowers,exercise equipment,machinery,valves,spigots,etc.

Check Stock

Mueller Industries 109-814 Float Valves, 0.75 Inch

Dual inlet thread for connecting pipe and locknut.
Machined flange for support against tank wall.
Dual inlet thread for connecting pipe and locknut, high tensile serrated arms, locknut included with male inlet valves.

Check Stock

Hromee 8 Pieces Air Chuck Set with Dual Head Tire Chuck, Closed Ball Air Chuck and 1/4 Inch Male Air Plug, Heavy Duty Air Compressor Tire Inflation Tool

PACKAGE INCLUDES - The kit includes 2PCS dual head air chuck, 2PCS ball air chuck, 2PCS male air fittings and 2PCS thread tape..
DUAL HEAD CHUCK - with 1/4 inch FNPT air inlet, dual head chuck makes tire valves more accessible with the two heads for easier access. To use inner head when the valve is facing inward, which is great for reaching into dually trucks and other challenging angles..
CLOSED BALL CHUCK - Ball air chuck is ideal for tire inflation of various tires, including car, truck, SUV and bicycle tires. This air chuck features a built-in shut-off valve seals air when not in use and 1/4 in. NPT female threads..
EASY TO USE - All the chucks are female NPT so we equip 2 pieces male air plugs for easy connection. And 2 rolls of thread tape are for better seal..
HEAVY DUTY&STURDY - They are all made from steel and copper plated which features good corrosion resistance and wear resistance, you can use them for long time. Perfect for tire inflating and measuring the pressure..

Check Stock

DimcoGray Black Phenolic Ball Knob Female, Brass Insert: 10-32\ Thread x 5/16\ Depth, 3/4\ Diameter x 45/64\ Height X 3/8\ Hub Dia (Pack of 10)

【Feature】-The Ball knob Injection molding,Bakelite material, feels good.
Tightly molded-in insert insures optimal durability and functionality.
The round smooth surface gives a dressed-up finished appearance. Ideal lever knob for machine handles.
【Hight Quality】-The handle is made with premium quality and has excellent electrical insulation,oil resistance,weak acid resistance,alkali resistance and general solvent resistance,and has excellent mechanical properties such as toughness,rigidity,good rigidity and balance.
【Easy operation】-This Bakelite hand Knob is easy to install and remove and does not require any tools.
【Application】-Ultra-solid ball knob with a Shiny finish, suitable for general application,such as control levers and push-pull rods,lawn mowers,exercise equipment,machinery,valves,spigots,etc.

Check Stock

MASTERCOOL 58490 Universal A/C Valve Core Remover/Installer, Black

Designed for use of servicing valve cores in R134a and R12 systems.
Universal valve core remover/installer for standard, JRA, Eaton and GM large bore valve cores.
Access and change valve cores while the A/C system is still filled with refrigerant.
Stainless steel ball valve design and patented thread remover lets the user block off the system while changing the valves cores, allowing for no refrigerant loss.

Check Stock

Mastercool 58531 Black R134A Standard and JRA Valve Core Remover

Designed for use of servicing valve cores in R134a systems.
Valve core remover/installer for standard and JRA valve cores.
Access and change valve cores while the A/C system is still filled with refrigerant.
Stainless steel ball valve design and patented thread remover lets the user block off the system while changing the valves cores, allowing for no....

Check Stock

Hourleey Brass Garden Hose Splitter (2 Way), Solid Brass Hose Y Splitter 2 Valves with 2 Extra Rubber Washers (Brass)

...valves, can be closed tightly to ensure no water leak from the garden hose separator connector part. All the hose bib splitter valve can be turned on and off individually, using one or more valves according to your need, greatly enhance the user convenience with freely switch..
Notes: The size of all male and female thread connect are 3/4 inch. Please using the tape wrap the thread to ensure no water leak in your need. If you have any questions, let us know and we will help you within 24 hrs..

Check Stock