ReviewsThread End Ball Valve

Motorized Ball Valve- 1/2\ Brass Electrical Ball Valve with Full Port, 9-24V AC/DC and 3 Wire Setup by U.S. Solid

SAFE AND RELIABLE- Made of durable brass, this valve is safe and reliable.
The estimated life expectancy of 80,000 to 100,000 cycles means it is built to last.
NPT THREADING-½” quality brass thread, manufactured and measured according to National Pipe Thread standards.
This electrical ball valve is full port, meaning the bore in the ball is a full 1/2”.
This minimizes pressure loss through the valve.
9V-24V AC/DC- Works effectively over entire voltage range.
No power expended once fully open or fully closed.
3 WIRE, 2 POINT CONTROL SETUP- Simple three wire connection, with two points of control.
ALTERNATIVE TO SOLENOID VALVES- Automatically cuts off power once fully open or fully closed.
This reduces likelihood of overheating, making it a great alternative to solenoid valves for projects where a valve needs to be open for an extended period of time.

Check Stock

MOSNAI Golf Cart Ball Joint Kit Tie Rod End Fits for Club Car Precedent 2004-UP & 2018-up Tempo Right Hand Thread OEM#1022883-01 #1020226-01

【Fit Models】Golf Cart Ball Joint Kit Club Car Precedent 2004-UP and 2018-up Tempo Golf Cart..
【Replace OEM Part】2 Pcs Right Thread Club Car Precedent Tie Rod End，OEM#1020226-01,1022883-01,102022601,102288301..
【Function】2 Pcs Tie Rod End M12 X 1.25 (Right Thread), Club Car Precedent Golf Carts Use Right Thread Rod End on Both Sides..
【Easy Installation】Ball Joint Kit Well Made, Meets OEM Specifications, Please Carefully Check the Year, Model and Serial Number of Your Golf cart Before Purchasing..
【Package Content】 2 Pcs 102022601 1020226-01 Right Thread Tie Rod End Included..

Check Stock

JUSONEY Shut Off Valve, Water Hose Turn Off Valve Garden Hose Connector Set with Rubber Gaskets (12PCS)+Leak-Free Ball Valve (6PCS) Standard 3/4' Thread

Package Includes 6 hose shut-off valve with rubber gaskets and extra 12 rubber gaskets. When you installation, make sure that it be tightened, but not super tight or else you will crush the gasket..
Simply give a quarter turn and you have water! The water valve thread have well cut to change out any spraying device. and the lever ball easily control the flow..
NO RUSTING! our garden hose shut off valve is made out of a combination of strategically placed hardened PVC plastic and zinc, and will never rust..
With the TPR rubber coated body, the turn off valve body is anti-slip, which means you can grip it even with wet hands!.
Put hose connectors between two hoses conveniently shut off water at the end of the hose without having to walk back to the spigot shut the water on and off..

Check Stock

Tool Daily Pressure Washer Foot Valve for Sewer Jetter Kit, as Power Washer Ball Valve, 4000 PSI

Package include: 1-piece Foot Valve for sewer jetter kit, 1-piece coupler (3/8’’ quick connect socket+ M22 14mm male), 1-piece coupler (3/8’’ quick coupler plug + 3/8’’ male thread), 1-piece adapter (3/8’’ quick coupler socket + 3/8’’ male thread), 1-piece adapter (3/8’’ quick connect socket + 3/8’’ female thread)..
Operators of sewer jetting need both hands free to feed or retract the sewer jetter hose in the sewer line. Foot operated valve for sewer jet allows hands-free control..
Foot Valve for Pressure Washer Sewer Jetter Inlet: 3/8” female NPT. Foot Valve Sewer Jet Kit for Pressure Washer Outlet: 1/4’’ female NPT. Max Flow: Up to 8 GPM. Max Temperature: 320 °F. Maximum Pressure: 4000 PSI..
Steel Cover for safety, Heavy gauge steel construction for durability & stability. Pedal and valve ball are in protective housing..
Foot Valve for Sewer Jetting is excellent accessory for sewer hose operation. Inlet & outlet positioned to help keep hose out of the way. Sewer jetter kit for pressure washer also can be used in other applications..

Check Stock

uxcell 4 PCS M2/2mm 15mm Linkage Rod End Tie Rod End Ball Head Joint Adapter Black for RC Crawler Boat

FEATURES: Total length:15mm/0.59 inch, Bottom Thread: M2 (Fit for tie rod with M2 thread) Ball head hole diameter: 2mm (fit M2 screw and nut ).
SUITABLE FOR: This ball head tie rod end holder is designed for RC Airplane, RC Helicopter, RC robot, and other models..
ADVANTAGE: fine workmanship, durable in use, Make your RC more cool and attractive.
PLEASE NOTE: the bottom hole with thread.it is not a self-tapping hole. Please allow 1-3mm differences due to manual measurement.
PACKAGE CONTENT: 4 Pcs x Rod End Tie Rod End Ball Head Joint.

Check Stock

Tool Daily Compatible Chemical Injector Set for Pressure Washer, Replacement for Briggs and Stratton 190593GS 190635GS 203640GS

Pressure Washer Soap Injector Kit, compatible Briggs & Stratton Pump 190593GS, 190635GS and 203640GS. Please identify the part number of pressure washer pump, then check if it fits your pressure washer..
How to replace: Follow soap hose to end and you’ll find injector. Take off soap hose. Use wrench to remove old injector. Clean out any gunk or dried soap in receptacle. Make sure rubber o ring is on injector as pictured. Put ball bearing inside injector and then the spring with small end of spring against the ball bearing. Insert injector into receptacle and tighten injector with 13mm wrench. Don’t overtighten, you’ll break the o ring or crack white metal on pump. Put the soap hose back on..
If the part on your pressure washer part is worn-out, rusted or hard-water-deposit clogged, you can replace it with this set..
Package List: Two Chemical Injector Sets, including 2 Brass Barbs, 2 Check Valve Balls, 2 Springs, 4 O-Rings..

Check Stock

STYDDI Solid Brass Rain Barrel Spigot, Quarter Turn Ball Valve Faucet with Heavy-Duty Bulkhead Fitting Adapter for Aquariums, Water Tanks, Tubs, Pools

... and solid brass nuts, which is perfect for DIY rain barrels or replacement applications..
PACKAGE INCLUDED - This rain barrel spigot kit includes a 1-1/8 inch brass rain barrel quarter turn ball valve spigot and a 3.14 oz brass bulkhead fitting with 1-1/8 inch female thread. The thread of the water spigot input is 1/2" NPT Male, while the output thread is 3/4" GHT Male compatible for any garden hoses. It also comes with a seal tape and two water-proof washers..
TWO INSTALLATION METHODS AND TOOLS NEEDED - The brass bulkhead fitting can be front mounting or back mounting. When installing, a electric drill is needed for drilling a 1-1/16 to 1-1/8 inch diameter holes, and also need a pipe wrench or adjustable wrench. This kit suits for rain barrels which have up to 1.3 inch thickness wall..
LEAK-PROOF BALL VALVE AND MULTI-TURN VALVE - There is a stainless steel ball valve in this rain barrel faucet to ensure a leak-proof seal when closed. Apart from this, it has a multi-turn valve that allows you to easily control the water flow. With this leak, rust and corrosion-proof rain barrel spigot, you have already got h....

Check Stock

R134A R410A R22 R12 Charging Hoses and Ball Valve Set, 3 Pcs Color Coded Hoses/w Ball Valve 1/4" SAE Thread (7" Long) for AC HVAC Maintenance Kit and Air Condition Refrigeration Charging Tools

WIDE APPLICATION --- Standard refrigeration charging hoses with 1/4" SAE male and female thread for refrigerants R410A,R22,R134a,R12..
HIGH WROKING PRESSURE --- 7" Long Charging Hose Completed with Solid Brass Manual Shut-off Ball Valve. Rated working pressure: 3000 psi burst / 600 psi Max. working pressure..
WELL DESIGN --- Designed to meet standard 1/4" SAE female refrigerant charging hoses set with shut off of red, blue and yellow. Ball valve design with a quarter turn of the valve handle switch for controls refrigerant. Can be operated with one hand - Screws onto charging hose end..
PREMIUM QUALITY --- Made of heavy-duty solid metal for durable use. Valves are color coded on knobs 1-Red, 1-Blue & 1-Yellow..
ONE YEAR WARRANTY --- The HVAC, HVAC/r, A/C maintenance tools comply with one year warranty, should be there any question, please feel free to contact us..

Check Stock

75mm IBC Tote Tank Butterfly Valve Taps Water Adapter IBC Tank Water Container

75mm (DN50) Ball Valve- Versatile as chemical process and acid, liquid storage buckets, tanks, container outlet control valves. This IBC tote adapter comes with coarse S75x6 thread with a diameter of 2.95 inches (75mm) . Please note that this IBC tote fitting is coarse thread with 6 mm pitch (distance between the threads)., NOT fine thread.Please check before purchase..
DURABLE and HEAVY DUTY-Made of premium plastic materialc and high density polyethylene, this adapter is acid and alkali resistant. It can be used for 3500 times repeatedly. Super durable for long time use..
QUICK and EASY INSTALLATION-Come as completed adapter. Just connect to the IBC/Water tank and you can Use it..
VERSATILE and NO-LEAKAGE-used for plastic container outlet control to prevent liquid from splashing around. Supported by strong silicone gasket, never worried about leakage..
Packet Included: 1x Assembled DN50(75MM) Ball Valve, 1 year warranty.

Check Stock

Waterway 2 in. TruSeal Diverter 3-Way Valve 600-7100-CPVC

Trim line ball valve is designed for maximum flow efficiencies with pressure ratings up to 50-psi rating.
Made from non-corrosive, durable ABS material.
Feature 2-way ball valve with 1-1/2-inch MIP by 1-1/2-inch FIP connection and dial handle for easy flow regulation.
Also feature Teflon seats for dependable sealing and a union end connector that accurately aligns ball.
Provides simple disassembly of piping connections and visual indication of valve setting.

Check Stock

Gralara High Pressure Washer Ball Valve Quick Connector High Pressure Resistance for Agricultural Irrigation, 1 of 4inch

STURDY DESIGN: Made of durable steel material, this ball valve is specifically designed for pressure washing machine hoses that need to handle high pressure ratings up to 4500 PSI and a maximum temperature of 60 degrees Celsius..
VERSATILE: Perfect for car wash, patio, siding, and deck cleaning jobs, this high-pressure washer valve switch makes cleaning tasks quick, easy, and efficient..
QUICK CONNECTOR: This high pressure washer ball valve kit comes with a 3/8" quick connector and plug for easy attachment to your sprayer, nozzles, pumps, and hoses..
COMPATIBILITY: The adapter's thread size is 3/8 NPT, not G 3/8 (3/8 BSP)..
EASY TO USE: This ball valve switch is designed for easy opening and closing, and provides tremendous leverage under high pressure..

Check Stock