ReviewsThread Locking Compounds

Ridgid 47760 Universal Die Head 1/4-3/8 NPT HS

• ..., good toughness and wear-resistance..
• Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery..
• Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair..
• Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
• Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead to damage to the die teeth..

M16 x 2.0 Metric Int. Thd., 1-8 Inch Ext. Thd., .781 Lg., E-Z LOK Thread Inserts, Metic Steel (1 Each)

Azusa Slotted Hex Nut, 3/8-24, Zinc Plated

• Size: thread size: M18 x 1.5mm/0.06''. Outer diameter: 32mm/ 1.26''. Height: 8mm / 0.31''..
• Material: Made of carbon steel, oxidized black finished, good rust and corrosion resistance..
• Feature: Design with thread inside, 4-slot slotted round nut..
• Advantage: The pitch and spiral angle of the fine thread is smaller, which is more conducive to the self-locking, so the fine thread are generally used in places where it is necessary to prevent loosening..
• Application: Widely used for roller bearing, axial shaft, pump valve, etc..

Max Tarn 500 & 800, Engine and Toolroom lathe, Operations Manual

• Sliding headstock pivots 360 degrees with 7 positive locking positions (0, 30, 60, 90, 120, 180, and 270 degrees).
• Positive locking tool rest with redesigned clamping.
• Improved tailstock quill locking with anti-rotation key.

Woodturning with Resin: Techniques & Projects for Turning Works of Art

• Sliding headstock pivots 360 degrees with 7 positive locking positions (0, 30, 60, 90, 120, 180, and 270 degrees).
• Positive locking tool rest with redesigned clamping.
• Improved tailstock quill locking with anti-rotation key.

M6 Alloy Steel Hand Screw Tap & Tools for M6 Wire Thread Inserts & 304 Stainless Steel M6 Wire Thread Inserts Helical Threaded Insert Kit

• 【Premium Quality 】 Used in various low strength materials, which can improve the wear resistance of bolt connections and avoid the damage of thread. The locking type wire screw sleeve can lock the screw into the threaded hole, so that the screw is not loose when subjected to shock vibration, which is better than the normal locking device..
• 【Effect】 Because of a certain elastic, can make the load on the thread is more even, eliminate the screw and screw hole deviation between the pitch and tooth type, and can absorb vibration, thus increasing the screw thread connection strength and resistance to fatigue strength..
• 【Material】 Made of high quality Stainless Steel, good corrosion resistance and never rust, durable to use,have a long time..
• 【Special】 Wear resistant. Used for frequent disassembly, it can greatly improve the life of thread. Anti-loose. Especially for the aircraft and other products requiring high insurance coefficients..
• 【Easy to maintain】 The damaged screw holes shall be put into the wire screw sleeve , which can be used again to avoid the possibility of damage to the workpiece..

Saiper 2-13mm Heavy Duty Keyless Drill Chuck Quick Change Converter 1/2'-20UNF Thread with SDS-Plus Shank 1/4' Hex Shank 1/2 inch Socket Square Female Adapter

• Multiply utility of cordless impact drivers and wrenches to do work of regular power drill..
• Chuck Size Thread: Thread Mount: 1/2"-20UNF, Chuck range: Approx. 2-13mm/5/64”-1/2”, Chuck Adaptor Thread: 1/2”.
• Material: Carbon Steel and plastic. Unique patented locking function, conveniently tighten with one hand, breaking the traditional locking methods..
• Package included: 1 x Keyless Chuck, 1 x SDS-Plus Shank ,1 x 1/4" Hex Shank , 1 x 1/2 inch Socket Square Female Adapter.
• NOTE: The product can NOT be used counterclockwise ! NOT suitable for impact drivers or applications involving high torque load..

The Hillman Group 662 Wing Nut, 1/2-13-Inch, 8-Pack , Zinc

• Overall Size: 26.3 x 11.6 x 12.7mm / 1.04" x 0.46" x 0.5" (L*D*H).
• Application: Fixing plates, blinds, drums, cymbals, music stand, folding chairs, quick clamps, home furnishing, fixing racks, etc..
• Advantage: It is used in places where frequent adjustment or disassembly of fastener connections is required. No tools are required to install the product, just turn your hand to complete..
• Notice: When locking, you must confirm the thread specifications and clean the thread surface to avoid thread slipping..
• Feature: Easy to install and disassemble, reusable..

ARP 300-8242 Rocker Arm Nut Kit

• Manufactured to high tolerances so they run-in straight and true, and the extra-large radius base offers greater resistance to flex.
• Lengths are exact, designed to provide positive seating every time.
• Made from premium grade 8740 chrome moly steel and heat-treated to a tensile strength of 200,000 psi.
• Stud dimensions are: 1.750 overall stud height, .800 screw-in thread depth, .850 adjuster thread depth, 7/16-20 shank diameter and thread, and 7/16-14 base diameter and thread.
• Designed for use with ARP's patented Perma-Loc adjusters, not OEM-style self-locking nuts.

100PCS M10 Wire Screw Sleeve,Thread Repair Insert Kit,Stainless Steel Thread Locking Inserts,for Aircraft, Automotive, mechanized Fasteners

• Used in various low strength materials, which can improve the wear resistance of bolt connections and avoid the damage of thread.
• Because of a certain elastic, can make the load on the thread is more even, eliminate the screw and screw hole deviation between the pitch and tooth type, and can absorb vibration, thus increasing the screw thread connection strength and resistance to f.
• The locking type wire screw sleeve can lock the screw into the threaded hole, so that the screw is not loose when subjected to shock vibration, which is better than the normal locking device.
• The hardness of the wire screw is higher than the screw, so it has little wear and tear in connection with screw,and can be used repeatedly.
• Strengthen the connection strength and improve the connection condition, avoid sliding wire, wrong tooth phenomenon, and obtain excellent connection performance.

uxcell 5/8-11 UNC Round Die, Machine Thread Right Hand Threading Die, Alloy Tool Steel

• ..., good toughness and wear-resistance..
• Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery..
• Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair..
• Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
• Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead to damage to the die teeth..