ReviewsThread Repair Oil

Paxcoo Jewelry Making Supplies Kit with Jewelry Tools, Jewelry Wires and Jewelry Findings for Jewelry Repair and Beading

  • ...making project, jewelry beading project, jewelry repair and other DIY projects.
  • INCLUDE ALL YOU NEED – Paxcoo jewelry making supplies kit includes 3 jewelry pliers, 2 rolls of copper wire in silver and gold, 1 clear beading string cord, 6 needles, 1 tweezers, 1 caliper, 1 awl, 1 jump ring opener, 1 thimble ring, 1 thread scissors, 1 tape measure, 3 needle threaders, 1 zip pouch and a box of 12 different kinds of jewelry findings.
Check Stock

Fastcom Press-In Threaded Insert Steel, Compatible With Metal, 1/4\-20 Internal Threads External Threads, 0.408\ Length (Pack of 50)

  • 【stainless steel】Thread inserts are made of high-strength diamond-shaped steel wire with high strength and wear resistance..
  • 【full set】This thread repair kit contains installation tool, thread tap, drill, wire thread inserts, you can repair thread with no other tool needed..
  • 【working principle】This thread repair set can be placed in the screw hole of the workpiece such as aluminum alloy to form a standard internal thread with high strength, wear resistance and high precision..
  • 【box packed】All accessories are well packed in a box for easy carrying and storage, every tool has a place to place in case of mess..
  • 【wide applications】This thread repair set can be widely used for high voltage switch gear, microwave communication, automotive parts, aerospace precision parts, electronic products, air equipment, radiators, etc..
Check Stock

uxcell M6 X 1.0 Metric Round Die, Machine Thread Left Hand Threading Die, Alloy Steel

  • accuracy class: 6g. Made of alloy tool steel, hardness, high torque, good toughness and wear-resistance..
  • Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery..
  • Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair..
  • Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
  • Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ....
Check Stock

uxcell 1/2-20 UNF Round Die, Machine Thread Right Hand Threading Die, Alloy Tool Steel

  • fine grinding. Made of alloy steel, hardness, high torque, good toughness and wear-resistance for long service life..
  • Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery..
  • Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair..
  • Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
  • Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be....
Check Stock

uxcell M16 X 1.5 Metric Round Die, Machine Thread Right Hand Threading Die, Alloy Steel

  • accuracy class: 6g. Made of alloy tool steel, hardness, high torque, good toughness and wear-resistance..
  • Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery..
  • Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair..
  • Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
  • Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller (....
Check Stock

uxcell 1/2-13 UNC Round Die, Machine Thread Right Hand Threading Die, Alloy Tool Steel

  • fine grinding. Made of alloy steel, hardness, high torque, good toughness and wear-resistance for long service life..
  • Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery..
  • Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair..
  • Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
  • Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. Th....
Check Stock

Dovesun Fishing Rod Repair Kit Fishing Rod Guides Rod Nylon Wrapping Thread B-Casting Rod Repair Kit 19PCS

  • ...building a new fishing rod or renovating your first one, the rod guides Set offers the perfect high-quality solution to give you years of carefree fishing. NOTE: You need to purchase the epoxy if you repair your fishing rod with this Ceramic Guides Kit..
  • NYLON ROD WRAPPING THREAD: It is used to wrap the guides to the rod. Wraps tight and flat. Consistent tension makes wrapping much better and easier. Completely absorbs finish epoxy all the way down to the blank and spreads nicely. This tiny item is a life saver when in the rod repair. Definitely a must have in every tenured fishing expert..
  • OIL WIPES ROD MAINTENANCE: Constructed of high-quality non-woven fabric and fishing gear maintenance oil, lubricating and anti-wear. Waterproof and moisture-proof to delay the aging of fishing rods. Effectively removes stains and makes the rod as shiny as new. A protective film is formed on the surface of the fishing rod. How to use: open it and take out the oil maintenance cotton sheet, and wipe the items..
Check Stock

uxcell M2.5 x 0.45 Metric Round Die, Machine Thread Left Hand Threading Die, Alloy Steel

  • accuracy class: 6g. Made of alloy tool steel, hardness, high torque, good toughness and wear-resistance..
  • Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery..
  • Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair..
  • Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
  • Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ....
Check Stock

uxcell 1/4-28 UNF Round Die, Machine Thread Right Hand Threading Die, Alloy Tool Steel, 2pcs

  • fine grinding. Made of alloy steel, hardness, high torque, good toughness and wear-resistance for long service life..
  • Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery..
  • Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair..
  • Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
  • Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter shoul....
Check Stock

M14x1.25 Spark Plug Thread Repair Kit with Assorted Length Inserts p/n 4490 Time-Sert

  • TIME-SERT Kit Includes assorted length inserts of washer seat and taper seat styles.
  • Professional Spark plug thread repair kit with inserts for a high quality repair.
  • Repair stripped out spark plug threads without removing the head.
  • M14x1.25 spark plug thread repair Kit Fast and reliable repair by Time-Sert.
  • Simple 3 step process in this quality spark plug thread repair kit.
Check Stock

15 pcs Helicoil Thread Repair Insert Set, M9 x 1.25 x 13.5mm Compatible Auto Car Hand Tool Set

  • All in One Kit: The thread repair kit including thread inserts, drill bit, thread tap, insert installation, lug breaking tool, allow you have smooth repairing experience..
  • Size: Come with 25Pcs M6 x 1mm Wire Thread inserts, ideal for restoring damaged threads, stripped internal threads and creates a stronger internal thread in soft metals..
  • Easy to Use: Complete configuration, the drill bits quickly create room for the installation tools to smoothly fit the inserts that repair your old threading and the breaking tool use for cleaning up..
  • Widely Use: Ideal for repairing damaged threads or worn out threads, suitable for engine repair and other automotive.Can be used in daily repair, car repair, drilling machine, etc..
  • High Quality Control: Made from precision stainless steel wire for strength, wearproof and durability which can increase connection strength and fatigue resistance..
Check Stock