ReviewsThread Repair Tapping Tool

Threaded Inserts M3 M4 M5 M6 M8 M10 M12 302 Stainless Steel Self Tapping Thread Insert Screw Bushing Slotted Wire Thread Repair Insert-55 Pcs

1.HIGH QUALITY: These self -tapping thread inserts all made of high quality stainless steel, it is of high hardness and low abrasion..
2.FEATURE: These threaded inserts has the ability of strong vibration resistance, it is resistant to vibration to avoid loosening. Greatly improve strength and stability of screws connection..
3.GOOD CHARACTER: Solid, is not easy to slick, deep thread, uniform force, no burr in thread, clear and tidy. A damaged screw hole can be used as normal after installed a thread insert.
4.EASY TO USE: Easy and quick to install with only one assembly tool. It can also repair the damaged thread by install it into thread hole..
5.APPLICATION: It enjoys a reputation in manufacturing fields such as automobiles industry, rail car industry, ship industry, household appliances and many other places..

Check Stock

uxcell Metric Machine Tap Left M5 Thread 0.8 Pitch H2 Accuracy 3 Flutes High Speed Steel

plug chamfer and right hand thread cutting. 3 straight flutes are ground to provide downward chip removal.
Material & Finish: High-speed steel tool is great for general purpose applications, offering high hardness and toughness. Titanium coating for improving wear and fusion resistance, long service life.
Applications: Great for through-hole threads. Can be used for drilling and tapping stainless steel (below 30HRC), aluminum, die steel, ordinary steel, non-ferrous metals, hard plastics, etc..
How to Use: Suitable for drill presses, tapping machines, CNC and milling machines. Used with tapping oil to get higher quality threads and more durable taps.
Warm Tips: Machine taps are suggested to be used with tap chucks with overload protection. It is not recommended for hand use and electric drill tapping.

Check Stock

ABN Spark Plug Thread Repair Kit, 14mm Reamer Cylinder Thread Repair Tool & Thread Insert – Spark Plug Rethreader Kit

...se with 3/8-inch drive ratchet or wrench.
Inserts sizes are 3/8-Inch, 7/16-Inch, 1/2-Inch, and 3/4-Inch.
Tap is tapered to allow the tip to fit and rethread the hole in order for the coil to fit.
Measure your plug diameter, thread, and pitch to see if this kit is compatible.
PACKAGE CONTENTS: Rethread kit includes a tapping reamer and 4 different depths of inserts for your convenience.

Check Stock

50Pcs 302 Stainless Steel Inner Thread Self Tapping Thread Inserts Set Thread Reinforce Repair Tool

High Quality: Self tapping thread insert is made of carbon steel which is durable and compact, it can prolong the product service life.
Superior Performance: Self tapping insert has a large contact area with the finished product, It adopts strong resistance to vibration, which can prevent loosening.
Easy Installation: It is easy and quick to install, you only need one assembly tool to install thread slotted insert.
Applicable Scope: Thread slotted insert can increase the thread strength for new products, which are used throughout the entire metal and plastics processing industry.
What You Will Get: You will get 50pcs brand new high quality brass slotted thread inserts, which is economical and beautiful.

Check Stock

uxcell 5/8-11 UNC Round Die, Machine Thread Right Hand Threading Die, Alloy Tool Steel

...erted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead to damage to the die teeth..

Check Stock

uxcell 5/8-24 UNEF Round Die, Machine Thread Right Hand Threading Die, Alloy Tool Steel

...erted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead to damage to the die teeth..

Check Stock

uxcell 5/8-18 UNF Round Die, Machine Thread Right Hand Threading Die, Alloy Tool Steel

...erted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead to damage to the die teeth..

Check Stock

uxcell 3/8-16 UNC Round Die, Machine Thread Right Hand Threading Die, Alloy Tool Steel

...erted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead to damage to the die teeth..

Check Stock

uxcell M6 X 1.0 Metric Round Die, Machine Thread Left Hand Threading Die, Alloy Steel

...erted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead to damage to the die teeth..

Check Stock

X-DREE 304 Stainless Steel Self Tapping Threaded Inserts Silver Tone 10 Pcs(Insertos roscados autorroscantes de acero inoxidable 304, tono plateado, 10 piezas

Self-tapping Design: Due to self-tapping ability, the base material does not have to be tapped in advance..
Multi-size to Choose: This thread insert tools with 7 size to choose, M3 M4 M5 M6 M8 M10 M12, meeting your different needs..
Advantage: This carbon steel slotted thread insert has a large contact area with the finished product, strong pull resistance, and the base material also has good air tightness..
Function: This self tapping thread insert has strong resistance to vibration, which can prevent loosening, can also increase the thread strength for new products..
Easy to Install: This self tapping insert is simple and quick to install - only need one assembly tool..

Check Stock

ABN Spark Plug Thread Repair Rethreading Set 14mm Metric – Rethreading Tool Kit – Comprehensive Taps Inserts & More

...epped tap ensures correct alignment of cutter in existing spark plug hole.
Extension tools allow easy access to the bottom of the plug recess (includes plug inserts).
EASY TO USE: Cut a larger threaded hole in cylinder head with tap, screw insert into head, screw plug into insert, use expander to help seat insert by tapping with a hammer.
Select insert that covers as much of the plug threads as possible to avoid carbon buildup (this can make unscrewing plug from insert difficult).
Use grease on flutes and any cutting tool to catch shavings, clean often, and vacuum when finished (grease not included).
EASY STORAGE: Heavy-duty 9.6” x 4.75” x 1.5” inch (24.4cm x 12.1cm x 3.8cm) metal carrying case with a plastic molded insert tray for easy transportation, safe storage, and quick organization.
PACKAGE CONTENTS: Package includes drill taps (14mm), tap holder, insert installer, wedge and handle, inserts, Allen wrench hex key, and storage case for your convenience.

Check Stock