ReviewsThread Repair Wrench

5 PCS Automotive Oxygen Sensor Socket Wrench Removal Tool and Thread Chaser Set (Blue Case)

  • Design Standard 6 point with low profile and slotted design to enable you remove oxygen sensors with the wiring harness still attached, and the socket is offset and compact which allows extra leverage even in hard to reach spots..
  • Package1-pc 3/8 Dr. extra deep broach socket (3-1/8 long), 1-pc 3/8 Dr. low-profile crowfoot socket wrench (1-1/4 long), 1-pc 1/2 Dr. offset crowfoot socket wrench (1-15/16 long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8 drive to clean and repair damaged threads.
  • USE Built for use with ratchets and breakers bars to remove and install oxygen sensors and hex vacuum switches on vehicle, even if you don't have a lot of experience working with cars. This high quality tool can save your time!.
  • Material Made from high performance chrome molybdenum and solid cast steel construction for strength and durability - Finished with Black Oxide to prevent rust..
  • Service100% satisfaction guarantee, If you have any issues with the Oxygen Sensor Socket Wrench and Thread Chaser Set, simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you..
Check Stock

Ridgid 47760 Universal Die Head 1/4-3/8 NPT HS

  • accuracy class: 6g. Made of alloy tool steel, hardness, high torque, good toughness and wear-resistance..
  • Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery..
  • Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair..
  • Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
  • Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ....
Check Stock

KOOTANS Ratchet T Handle Tap Wrench + 5pcs M3 M4 M5 M6 M8 Machine Screw Metric Thread Milling Plug T-shape Taps Set, Both Way Hand Tap Set Adjustable Manual Tapping Tool Kit for Home Use (Short)

  • PACKAGE INCLUDE --- 1Piece Ratchet Tap Holder Wrench, 5Pieces Taps(1xM3, 1xM4, 1xM5, 1xM6, 1xM8). Size of screw thread taps: M3*0.5, M4*0.7, M5*0.8, M6*1.0, M8*1.25. Length of wrench body: 85.5mm / 3.37inch. (Please clamp the tap in right place in work processing.).
  • EXCELLENT QUALITY --- This product is made of excellent alloy steel materials, chromium plating and polishing on the surface, high hardness, strong and durable, comfortable grip, anti-corrosion and rust. The structure is simple and easy to install. The head of holder adopts diamond-shape design, steel jaws and knurled chuck provide a secure, firm grip on a hexagonal or square drive..
  • DETACHABLE HANDLE --- Compared with the traditional tap wrench, it is more delicate in workmanship, easy to carry, and works great in tight spaces. With adjustable T handle, you can slide metal rod from side to side, added leverage in tight places. There is a ball inside the holder wrench, which is easy to install and fix the metal rod..
  • EASY TO OPERATE --- The quick two-way ratchet wrench is a kind of ratchet with a three position gear box in the middle, which can be right-handed tapping or left-handed tapping, or locked for non-ratcheting use. It is very convenient for one-hand operation. It can improve ....
Check Stock

uxcell Adjustable Tap Wrench Handle, for Metric M1-M10 W1/16-3/8 Taps, Tap Reamer Tapping Hand Tool, Medium Carbon Steel Handle with Nickel Plated

  • Tap Wrench: Fit tap size: M1-M10 (Mertic)/ 1/16" - 3/8"(UNC/UNF) / 1.5mm-10mm, medium carbon steel handle with nickel plated, zinc alloy chuck with electrostatic spraying, offering high hardness and wear resistance for long service life.
  • Applications: Hand tap wrench can clamp various taps for tapping operations. It also can be used with drills, reamers, screw extractors and other small tools that need to be rotated manually.
  • Features: Tap wrench has 1 rigid handle and 1 adjustable handle that adjusts the jaws to clamp tools easily and firmly. Straight tap wrench provides great leverage, and is specially designed for larger-diameter taps.
  • Easy To Use: Operates with both hands to rotate the tap wrench in a certain direction to process, repair and clean the internal thread.
  • Tips: The force of both hands must be even when operating the tap wrench. The wrench and the tap should form an angle of 90 degrees, and the tap and the threaded bottom hole are perpendicular to each other.
Check Stock

uxcell Adjustable Tap Wrench Handle for 1/16\-1/4\ (UNC/UNF) / M1-M8 Taps, Tap Reamer Tapping Wrench Hand Tool with Plastic Dipped Handle

  • Tap Wrench Size: Fit tap size: 1/16"-1/4" (UNC/UNF) / M1-M8 (Metric). Black oxide coating for good abrasion resistance and rust protection. Hardened carbon steel sliding block for high hardness and strength..
  • Wide Applications: Hand tap wrench can clamp various taps for tapping operations. It also can be used with drills, reamers, screw extractors and other small tools that need to be rotated manually..
  • Features: Tap wrench has 1 rigid handle and 1 adjustable handle that adjusts the jaws to clamp tools easily and firmly. Straight tap wrench provides great leverage, and is specially suitable for larger-diameter taps..
  • Easy To Use: Operates with both hands to rotate the tap wrench in a certain direction to process, repair and clean the internal thread. Plastic dipped handle provides firm and comfortable grip in use when exposed to fluid or moisture..
  • Tips: The force of both hands must be even when operating the tap wrench. The wrench and the tap should form an angle of 90 degrees, and the tap and the threaded bottom hole are perpendicular to each other..
Check Stock

uxcell Adjustable Tap Wrench Handle, for Metric M1-M8 W1/16-1/4 Taps, Tap Reamer Tapping Hand Tool, Medium Carbon Steel Handle with Nickel Plated, 2pcs

  • Tap Wrench: Fit tap size: M1-M8 (Mertic)/ 1/16" - 1/4"(UNC/UNF) / 2mm-9mm, medium carbon steel handle with nickel plated, zinc alloy chuck with electrostatic spraying, offering high hardness and wear resistance for long service life.
  • Applications: Hand tap wrench can clamp various taps for tapping operations. It also can be used with drills, reamers, screw extractors and other small tools that need to be rotated manually.
  • Features: Tap wrench has 1 rigid handle and 1 adjustable handle that adjusts the jaws to clamp tools easily and firmly. Straight tap wrench provides great leverage, and is specially designed for larger-diameter taps.
  • Easy To Use: Operates with both hands to rotate the tap wrench in a certain direction to process, repair and clean the internal thread.
  • Tips: The force of both hands must be even when operating the tap wrench. The wrench and the tap should form an angle of 90 degrees, and the tap and the threaded bottom hole are perpendicular to each other.
Check Stock

DASBET 5pcs O2 Oxygen Sensor & Oil Pressure Sending Unit Master Sensor Socket Set

  • 3 types of universal socket wrenchs cover various situations of oxygen sensor location.
  • Including: 1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads.
  • M12×1.25MM & M18×1.5MM Threads Chaser: Oxygen sensor thread chaser tool are used for cleaning and re-threading damaged spark plug hole. Cleans damaged spark plug ports and threads. Rethreads damaged spark plugs, eliminates corrosion and straights damaged threads. Reduces the chance of cross threading..
  • This 5pcs oxygen sensor and threads chaser set is suitable for most contemporary vehicles. The oxygen sensor sockets fit on most cars and are ideal for the removal oxygen sensors..
  • Durable: Made from high performance chrome molybdenum and solid cast steel construction for strength and durability, finish with black oxide to prevent rust..
Check Stock

uxcell 5/8-11 UNC Round Die, Machine Thread Right Hand Threading Die, Alloy Tool Steel

  • accuracy class: 6g. Made of alloy tool steel, hardness, high torque, good toughness and wear-resistance..
  • Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery..
  • Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair..
  • Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
  • Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ....
Check Stock

uxcell 5/8-24 UNEF Round Die, Machine Thread Right Hand Threading Die, Alloy Tool Steel

  • accuracy class: 6g. Made of alloy tool steel, hardness, high torque, good toughness and wear-resistance..
  • Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery..
  • Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair..
  • Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
  • Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller (....
Check Stock

uxcell 5/8-18 UNF Round Die, Machine Thread Right Hand Threading Die, Alloy Tool Steel

  • accuracy class: 6g. Made of alloy tool steel, hardness, high torque, good toughness and wear-resistance..
  • Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery..
  • Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair..
  • Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
  • Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ....
Check Stock

uxcell 3/8-16 UNC Round Die, Machine Thread Right Hand Threading Die, Alloy Tool Steel

  • accuracy class: 6g. Made of alloy tool steel, hardness, high torque, good toughness and wear-resistance..
  • Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery..
  • Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair..
  • Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
  • Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ....
Check Stock