ReviewsThread Ring Gage

Groz Machinist Jack | Heavy Duty | 1000 lb. Lifting Capacity | 1-inch Adjustable Screw (14100)

• 0.4, 0.5, 0.75, 1, 1.25, 1.5, 1.75, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7mm.
• Thread pitch size is stamped on each gage.

Shars 3/8' Precision R8 END Mill Tool Holder 202-5302 P[

Shorpioen 100-Pack 6 x 1 Phillips Bugle Head Coarse Thread Drywall-Wood Screw Zinc Plated Particle Board BC-0616CPGZ

• Coarse thread Drywall--Sharp point: A bugle head screw with spaced threads, extra sharp point and black phosphate finish..
• Coarse thread Drywall--Sharp point: For attaching drywall to wood studs or to 25 gage metal studs..
• Particle Board Screw: Same as a coarse thread drywall screw but available in shorter lengths than standard drywall screws..
• Particle Board Screw: Designed specifically for use in dense woods, especially man-made types such as chipboard and particle board..
• Please see the specifications in the spec sheet for full details (if spec sheet is not available, please email us and we will provide). If you have any questions or doubts, or if your requirements include specific dimensions, please contact us prior to placing your order..

Rivet, Drill Bit, & Screw Thread Combo Fastener Gauge | Metric and SAE | (BCP674)

• 0.25, 0.3, 0.35, 0.4, 0.45, 0.5, 0.55, 0.6, 0.65, 0.7, 0.75, 0.8, 0.85, 0.9, 1, 1.1, 1.2, 1.25, 1.3, 1.4, 1.5, 1.6, 1.7, 1.75, 1.8, 1.9, 2, 2.5.
• Thread pitch size is stamped on each gage.

6 Pcs 5/16\ to 6\ Telescopic Gauge Bore Gauge Telescoping Gage Set High Precision T Bore Hole Gauge Bore Measurement Tool

• 【Easy to Adjust】This telescopic bore gauge set allow the most pinhole gauge on the retractable gauge to enter, can quick check holes, slots and recess up to 6" deep..
• 【Bore Gauge Material】 The bore gauges are made of carbon steel with chrome plating on the surface.Telescoping Gage Set has nickel-plated finished and good side arc so that the product has a long service life..
• 【Bore Gage Packing】Total 6Pcs cylinder bore gauges in a ethylene plastic bag, range: 5/16" - 6" (8mm to 150mm), (1 gage: 5/16 - 1/2" range x 4.20" overall.
• 1 gage: 1/2 - 3/4" range x 4.40" overall.
• 1 gage: 3/4 - 1-1/4" range x 4.40" overall.
• 1 gage: 1-1/4 - 2-1/8" range x 5.85" overall.
• 1 gage: 2-1/8 - 3-1/2" range x 5.85" overall.
• 1 gage: 3-1/2 - 6" range x 5.85" overall)..
• 【Peration Method】 Use the small hole gauge to expand in the hole to be measured, lock it in place, and then take it down, and measure with bore micrometer or caliper to determine the final hole size..
• 【Unique Design】 The spring tension of bore measuring tool ​gives uniform contact pressure, can detect the inner diameter in a hole (or groove).Spring of telescopic gauge loads with knurled locking knob and knurled holding area..

Telescoping Gage Set, 6Pcs Precision Telescopic Gauge 8-150mm Adjustable Inner Diameter Gauge Micrometer Measuring Tools T-Bore Hole Gauge

• ...ct are head treated steel and precision ground to a radius allowing proper clearance on the smallest hole the gauge will enter..
• 【Bore Gauge Material】 The bore gauges are made of carbon steel with chrome plating on the surface. Self centering telescoping gauge has high rigidity, good wear resistance. Telescoping Gage Set has nickel-plated finished and good side arc so that the product has a long service life..
• 【Bore Gage Packing】 Total 6Pcs cylinder bore gauges in a ethylene plastic bag, range: 5/16" - 6" (8mm to 150mm), (1 gage: 5/16 - 1/2" range x 4.20" overall.
• 1 gage: 1/2 - 3/4" range x 4.40" overall.
• 1 gage: 3/4 - 1-1/4" range x 4.40" overall.
• 1 gage: 1-1/4 - 2-1/8" range x 5.85" overall.
• 1 gage: 2-1/8 - 3-1/2" range x 5.85" overall.
• 1 gage: 3-1/2 - 6" range x 5.85" overall)..
• 【Scope of Application】 Telescopic spring piston in the hole (or groove), can conduct inner diameter detection, used with micrometer or caliper, with knurled locking device..
• 【Unique Design】 The spring tension of bore measuring tool ​gives uniform contact pressure, can detect the inner diameter in a hole (or groove).Spring of telescopic gauge loads with knurled locking knob and knurled holding area..

Forster Products 5.56 NATO MIN and MAX Headspace Gage Set

• 5.56 NATO CHAMBER HEADSPACE GAGE: The proper use of Headspace Gages is the most reliable way to test rifle chamber length. The 5.56 NATO maximum chambering requires a slightly longer headspace than the commercial 223 cal. Rem..
• GO/MINIMUM LENGTH: Corresponds to the minimum chamber dimensions. If a rifle closes on a GO gage, the chamber will accept ammunition that is made to SAAMI maximum specifications. The GO gage is essential for checking a newly-reamed chamber in order to ensure a tight, accurate, and safe chamber that will accept SAAMI maximum ammo. NATO Minimum rifle chamber gages check to see that the rifle will accept the longest (headspace dimension) NATO ammunition cases that are currently manufactured..
• MAXIMUM LENGTH: The Forster NATO Maximum rifle chamber gage checks to see that the rifle does not have excessive headspace, which could lead to dangerous pressure problems. The NATO Maximum Headspace Gage measures 1.6455″.
• PRECISION MACHINED: Manufactured from top-quality, hardened steel and precision ground to ANSI and SAAMI tolerances. Headspace tolerance ground to a very exacting ±.00015. Each Headspace Gage thoroughly inspected with NIST-certified measurement tools to ensure the highest quality product..

4Pcs Radius Gauge R0.3-1.5/ R1-6.5/ R7-14.5/ R15-25 Measure Tool Metric Reading and Portable Stainless Steel Radius Fillet Gauge Measuring Tool

• The thread Pitch Gauge used to measure the pitch of the thread, It sets 4pcs centre gage 55° Inch System..
• This radius gauge has two types of leaves so it can check both convex and concave surfaces..
• There are four radium gauges in different shapes and sizes to meet you various need..
• Very useful gauge for tool & die makers, machinists, and many other worker to check the radius of tools..

HFS(R) 6 Pc Precision Telescoping Gage Set 5/16\ - 6\ Range T-Bore Hole Gauges w/Pouch

• [MATERIAL]: It is made of carbon steel with chrome plating on the surface.
• [PACKAGE INCLUDE]: Range: 5/16" - 6" (8mm to 150mm),6PCS in total(1 gage: 5/16 - 1/2" range x 4.20" overall.
• 1 gage: 1/2 - 3/4" range x 4.40" overall.
• 1 gage: 3/4 - 1-1/4" range x 4.40" overall.
• 1 gage: 1-1/4 - 2-1/8" range x 5.85" overall.
• 1 gage: 2-1/8 - 3-1/2" range x 5.85" overall.
• 1 gage: 3-1/2 - 6" range x 5.85" overall).
• [OPERATION METHOD]: Use the gauge to expand in the hole to be measured, lock it in place, and then take it down, and measure with micrometer or caliper to determine the final hole size.
• [HIGH PERFORMANCE]: The rigid handle and double acting design (automatic centering) can quickly check the internal dimension. The spring tension is constant and the hand feel is even..
• [APPLICATION]: It is used to obtain the exact size of holes and slots, which is suitable for factories, schools, offices and other places.

HFS (R) 81PCS Grade B GAGE Gauge Block Set

• [Packing]: 81 Pieces. 9 blocks: .1001-.1009" in .0001" steps.
• 49 Blocks: .101-.149" in .001" Steps, 19 Blocks: .050-.950" in .050 steps, 4 Blocks: 1-4" in 1" steps.
• [Material]: Set made of fully seasoned alloy tool steel with hardened to 65 RC to provide both long wear and resistance to stains and rust.
• [Instructions]: Blocks manufactured under carefully controlled conditions, allowing for the highest degree of accuracy when used at room temperatures of 68 degrees F (20 degrees C).
• [Grade]: All gage block sets are certified by an accredited ISO-17025 Gage lab with long form certification. Individual serial numbers on each block, regardless of grade.
• [Application]: Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. Grade B gage blocks are commonly used in workshops for calibrating and inspecting mounting tools and cutters.

Nathan Zipster Running Belt.Bounce Free Waist Pack. Pockets with Zippers. Runners Fanny Pack. Fits All iPhones, Android, Samsung etc. for Men and Women

• 5.56 NATO CHAMBER HEADSPACE GAGE: The proper use of Headspace Gages is the most reliable way to test rifle chamber length. The 5.56 NATO maximum chambering requires a slightly longer headspace than the commercial 223 cal. Rem..
• GO/MINIMUM LENGTH: Corresponds to the minimum chamber dimensions. If a rifle closes on a GO gage, the chamber will accept ammunition that is made to SAAMI maximum specifications. The GO gage is essential for checking a newly-reamed chamber in order to ensure a tight, accurate, and safe chamber that will accept SAAMI maximum ammo. NATO Minimum rifle chamber gages check to see that the rifle will accept the longest (headspace dimension) NATO ammunition cases that are currently manufactured..
• MAXIMUM LENGTH: The Forster NATO Maximum rifle chamber gage checks to see that the rifle does not have excessive headspace, which could lead to dangerous pressure problems. The NATO Maximum Headspace Gage measures 1.6455".
• PRECISION MACHINED: Manufactured from top-quality, hardened steel and precision ground to ANSI and SAAMI tolerances. Headspace tolerance ground to a very exacting ±.00015. Each Headspace Gage thoroughly inspected with NIST-certified measurement tools to ensure the highest quality product..