ReviewsThreaded Anchor Bolt

Ironwood Pacific AnchorLift Anchor Puller for River and Lake Anchoring, Floats up to 80 lbs

FLOAT YOUR ANCHOR OR CRAB TRAP TO THE SURFACE - The AnchorLift Anchor Puller easily floats anchors, crab traps, and lobster pots up to 80 lbs..
EASY-TO-USE ANCHOR RETRIEVAL SYSTEM - Slide the AnchorLift over the anchor line, tie off to a cleat and let the anchor out by holding the sliding bolt in the up position. When anchored toss the AnchorLift with buoy into the water. To raise your anchor motor your boat forward to float the anchor to the surface..
IDEAL FOR ANCHORING IN RIVERS AND LAKES - Use in place of a winch or windlass. Sliding stainless steel bolt grabs line and locks anchor at water's surface. Designed for use with anchor lines 3/8" to 5/8" in diameter..
QUALITY CONSTRUCTION - Made from marine grade nylon with stainless steel at all wear points. For extra heavy-duty use, consider our anodized aluminum AnchorLift Pro model. (Link in description below)..
MADE IN THE USA - The AnchorLift Anchor Puller and Polyform buoy are made in the USA and backed by a limited lifetime warranty..

Compatible with all bolt handles threaded in standard 5/16"-24.
Machined from 17-4 Stainless Steel and Heat Treated for optimal strength and durability..
Physical Vapor Deposition (PVD) Coating - a metal ceramic film that exhibits a high micro-hardness (1500-8000 HV), in excess of 80 HRc..
100% Manufactured and PVD Coated in the United States of America..
Installs easily on 5/16"-24 pre-threaded bolt handles.
requires gunsmithing for non-threaded bolt handles..

Compatible with all bolt handles threaded in standard 5/16"-24.
Machined from 17-4 Stainless Steel and Heat Treated for optimal strength and durability..
Physical Vapor Deposition (PVD) Coating - a metal ceramic film that exhibits a high micro-hardness (1500-8000 HV), in excess of 80 HRc..
100% Manufactured and PVD Coated in the United States of America..
Installs easily on 5/16"-24 pre-threaded bolt handles.
requires gunsmithing for non-threaded bolt handles..

10 standard M6x80mm, please refer to the picture for detailed dimensions..
304 stainless steel, corrosion-resistant, can also be used in humid places, strong and durable..
The expansion screw is a solid structure, and the punch is formed at one time, with a large bearing capacity and extremely strong tensile strength.
the expansion pipe is cut by seamless steel pipe, which has a large tensile force after expansion, which is strong and safe..
Application: This heavy-duty torque control shield anchor Hardware Tools for Wall Building is suitable for concrete masonry and solid brickwork,ceiling,expansion sleeve anchor bolt heavy duty fixing anchors suitable for fences, anti-theft, doors and windows, rain sheds, air -conditioning fixed, home decoration, engineering, etc..
Note: Expansion bolts must be installed on a relatively hard base plate, and the soft and easy to fall off places are unstable, such as the gap of the lime soil of the wall. All expansion pipes should enter the wall.. As long as the threaded part is long enough, the sleeve part will be deeper and stronger..

Durable Hanger. With stainless steel and vibrated polished, the climbing anchor features corrosion resistant..
Sturdy Anchor. The bolt hanger is rated at 26kN, which offers a safe connection point for you..
Rounded Edges Design. The clever design offers anti-wear effect when clip carabiner or other gear on the bolt..
Large Open. The wide connection hole design facilitates carabiner or any other gears clipping..
Available Bolt Diameter: 10 mm / 3/8 in..

This anchor set is perfect for mounting a wide variety of objects in drywall and other surfaces where simple fasteners are impractical..
Set includes plastic self drilling hollow-wall anchor, molly bolt, toggle bolt with self-tapping screws.
The ribs on the plastic anchors prevent the anchor from turning in the hole during installation.
The molly bolts Hollow wall anchors with pointed ends can pierce drywall using just a hammer.
These toggle bolts are anchors for use in hollow walls and hollow masonry applications.

Length of threaded bolt above base: between 1 in. to 1-1/8 in. approximately. Pre-installed 1/4 in. Thick plastic slide on the bottom making it easier to move furniture around.
Individually inspected for quality assurance.
Size: 4 in. H x 4-7/8 in. Dia. Pre-installed 5/16 in. diam. threaded hanger bolt. 18 Threads per Inch Bolt (5/16-18).
Comes unfinished. Natural woodgrain texture unfinished. Can be painted, stained or faux finished.

For Remington 700, Howa, Savage, Winchester M70 and All Bolt Handles Threaded in Standard 5/16"-24.
Machined from premium billet, mil-spec, aircraft grade T6 aluminum..
Blue anodized hard coat finish for optimal strength and durability..
100% Manufactured and Hard Anodized in the United States of America..
Installs easily on 5/16"-24 pre-threaded bolt handles.
requires gunsmithing for non-threaded bolt handles..

For Remington 700, Howa, Savage, Winchester M70 and All Bolt Handles Threaded in Standard 5/16"-24.
Machined from premium billet, mil-spec, aircraft grade T6 aluminum..
Black anodized hard coat finish for optimal strength and durability..
100% Manufactured and Hard Anodized in the United States of America..
Installs easily on 5/16"-24 pre-threaded bolt handles.
requires gunsmithing for non-threaded bolt handles..

For Remington 700, Howa, Savage, Winchester M70 and All Bolt Handles Threaded in Standard 5/16"-24.
Machined from premium billet, mil-spec, aircraft grade T6 aluminum..
Black anodized hard coat finish for optimal strength and durability..
100% Manufactured and Hard Anodized in the United States of America..
Installs easily on 5/16"-24 pre-threaded bolt handles.
requires gunsmithing for non-threaded bolt handles..

ANCHOR IS MADE FROM RUST RESISTANT MATERIAL-Can be used in areas where moisture is present if the bolt used is rust resistant.
BOLT EXPANDS ANCHOR-No setting tool required.
WORKS IN MOST MASONRY MATERIAL-Versatile for wide range of applications.
LAG SCREWS MUST BE USED-Easy to find many lengths and diameters.