ReviewsThreaded Anchor Bolts

PC Products 72561 PC-Concrete Two-Part Epoxy Adhesive Paste for Anchoring and Crack Repair, 8.6 oz Cartridge, Gray

  • Two-part epoxy adhesive paste to fill and repair cracks in concrete, and to anchor threaded rods, bolts, and dowels into concrete, grout-filled block, and unreinforced masonry.
  • High-tack paste resists moisture for application in damp environments and can be used in vertical applications.
  • Can be used in indoor and outdoor applications with an application temperature range from 35 to 115 degrees F and a service temperature range from -20 to +115 degrees F.
  • Provides work time of 20 minutes and cure time of 4 hours (at 75 degrees F).
  • Formulated for anchoring threaded rods, bolts, rebar dowels and smooth dowels into concrete, grout filled block and unreinforced masonry..
  • PC-Concrete is excellent for filling and repairing cracks in concrete, and out-performs all caulks and hydraulic cements..
  • PC-Concrete will not come loose from any cleaned concrete surface and will hold during expansion and contraction of concrete..
  • PC-Concrete is the best solution for permanent concrete repair..
Check Stock

10Pcs M8 x 250mm 304 Stainless Steel Fully Threaded Rods, Threaded Rods Bar Studs, Right Hand Thread Long Threaded Screw, M8-1.25 Thread Pitch, Fits for Anchor Bolts, Hangers, U-Bolts (5/16\ x 10\)

  • 【Quality Material】These m8 threaded rod made of 304 stainless steel, which provides excellent corrosion resistance and anti-rust ability for long service life.
  • 【Package Content】You will get valued 10 pack of 8mm x 250mm threaded rods.
  • The fully threaded rods & studs can be drilled, cut, heated and shaped.
  • 【All Threaded Rods】Our stainless steel thread rod can be used for assembly fastening, screw into threaded nuts or tapped holes, cut to your desired length.
  • 【Wide Application】These 5/16 x 10 inches threaded rods are suitable for a wide variety of applications, such as anchor bolt, clamps, hangers, U-bolts, weld projections, even model building and more projects.
Check Stock

TEKTON 4 Inch Swivel Bench Vise | 54004

  • Includes 1-pc. 120-degree swivel bench vise: 4 in..
  • Cast iron construction (30,000 PSI tensile strength) with replaceable serrated steel jaws holds work with a sure, nonslip grip.
  • 120-degree swivel base with dual lock-down nuts positions workpiece where you need it.
  • Three mounting holes anchor vise securely to workbench.
  • Polished steel anvil offers a smooth, consistent work surface for shaping metal pieces.
  • Acme-threaded screw glides smoothly without binding.
  • Requires three 3/8-inch diameter bolts (not included) for mounting.
Check Stock

TOGGLER SNAPTOGGLE BAS Toggle Anchor 304 Stainless Steel Channel Made in US 3/8 to 3-5/8 Grip Range For 3/16 -24 UNC Fastener Size Pack of 100

  • Toggle anchor installs behind 3/8"- to 3-5/8"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting material.
  • Anchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes.
  • Made in USA, and works with 3/16"-24 UNC-threaded metal bolts (sold separately).
  • Ultimate tensile strength is 238 lb. in 1/2" drywall and 802 lb. in concrete block with a 3/16"-24 UNC bolt.
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations).
Check Stock

TOGGLER SNAPTOGGLE BBS Toggle Anchor 304 Stainless Steel Channel Made in US 3/8 to 3-5/8 Grip Range For 1/4 -20 UNC Fastener Size Pack of 100

  • Toggle anchor installs behind 3/8"- to 3-5/8"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting material.
  • Anchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes.
  • Made in USA, and works with 1/4"-20 UNC-threaded metal bolts (sold separately).
  • Ultimate tensile strength is 265 lb. in 1/2" drywall and 1,080 lb. in concrete block with a 1/4"-20 UNC bolt.
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations).
Check Stock

TOGGLER SNAPTOGGLE BA Toggle Anchor Zinc-Plated Steel Channel Made in US 3/8 to 3-5/8 Grip Range For 3/16 -24 UNC Fastener Size Pack of 50

  • Toggle anchor installs behind 3/8"- to 3-5/8"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting material.
  • Anchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes.
  • Made in USA, and works with 3/16"-24 UNC-threaded metal bolts (sold separately).
  • Ultimate tensile strength is 238 lb. in 1/2" drywall and 802 lb. in concrete block with a 3/16"-24 UNC bolt.
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations).
Check Stock

TOGGLER SNAPTOGGLE BB Toggle Anchor Zinc-Plated Steel Channel Made in US 3/8 to 3-5/8 Grip Range for 1/4 -20 UNC Fastener Size Pack of 100

  • Toggle anchor installs behind 3/8"- to 3-5/8"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting material.
  • Anchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes.
  • Made in USA, and works with 1/4"-20 UNC-threaded metal bolts (sold separately).
  • Ultimate tensile strength is 265 lb. in 1/2" drywall and 1,080 lb. in concrete block with a 1/4"-20 UNC bolt.
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations).
Check Stock

TOGGLER SNAPTOGGLE BB Toggle Anchor Zinc-Plated Steel Channel Made in US 3/8 to 3-5/8 Grip Range For 1/4 -20 UNC Fastener Size Pack of 50

  • Toggle anchor installs behind 3/8"- to 3-5/8"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting material.
  • Anchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes.
  • Made in USA, and works with 1/4"-20 UNC-threaded metal bolts (sold separately).
  • Ultimate tensile strength is 265 lb. in 1/2" drywall and 1,080 lb. in concrete block with a 1/4"-20 UNC bolt.
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations).
Check Stock

SNUG Fasteners (SNG325) Ten (10) 3/8-16 x 1-1/4\ Long Carriage Bolts Set w/Nuts & Washers, Count

  • A Hexagon Bolt is a threaded fastener with a hexagonal head shape, and are designed to be installed using a spanner. Hexagon bolts are favoured for their robust shape, which makes them suitable for more heavy-duty fastening applications. Hexagon bolts are also generally available in larger sizes than alternative fasteners..
  • As their name suggests, Full Thread Hexagon Bolts are fully threaded. This type of bolt is required when the shaft of a fastener is being inserted completely into a threaded hole. Fully Threaded Bolts are often used to securely fasten two threaded sections together..
  • Made from 18-8 stainless steel, FullerkregⓇ brand screws have good chemical resistance and may be mildly magnetic. Length is measured from under the head..
  • Screws that meet ASME specifications comply with these dimensional standards.DIMENSIONS: Diameter: 1/4" | Length: 2-1/2" | Thread Type: 20 tpi Coarse Thread (Standard).
  • Package includes ten each of bolts, hex nuts , Flat & Lock washers.
Check Stock

TOGGLER SNAPTOGGLE BDS Toggle Anchor 304 Stainless Steel Channel Made in US,3/8 to 2-1/2 Grip Range For 1/2 -13 UNC Fastener Size Pack of 25

  • Toggle anchor installs behind 3/8"- to 2-1/2"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting material.
  • Anchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes.
  • Made in USA, and works with 1/2"-13 UNC-threaded metal bolts (sold separately).
  • Ultimate tensile strength is 275 lb. in 1/2" drywall with a 1/2"-13 UNC bolt, and 2,038 lb. (material failure) in concrete block with a 1/2"-13 UNC hardened bolt.
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations).
Check Stock

TOGGLER SNAPTOGGLE BA Toggle Anchor with Bolts Zinc-Plated Steel Channel Made in US 3/8 to 3-5/8 Grip Range For 3/16 -24 UNC Fastener Size Pack of 10

  • Toggle anchor installs behind 3/8"- to 3-5/8"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting material.
  • Anchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes.
  • Made in USA, and includes 3/16"-24 UNC-threaded bolts.
  • Ultimate tensile strength is 238 lb. in 1/2" drywall and 802 lb. in concrete block with a 3/16"-24 UNC bolt.
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations).
Check Stock