ReviewsThreaded Bushing

Shoreline Marine Brushed Aluminum Seat Post | Adjust Seat 25-Inch to 3-Inch

• Uses 3/4" Pin-type mounting and tight fit nylon bushing for stability.
• Brushed aluminum 11" seat extension post.

Tel-Tru BQ225 Barbecue Thermometer 2 inch Aluminum dial 2.5 inch stem 100/500°F

Tel-Tru BQ225 Barbecue Grill Thermometer 2 inch dial and 2.13 inch stem

• 2" dial, black with white pointer, glass lens.

Quartex Standard Push-On Movement with Hex Nut - Long Shaft

• Clock Movement Measurements: Total hand shaft length is 28.6 mm (1 1/8 inch). Total shaft diameter is 7.9 mm (5/16 inch)..
• Maximum Clock Dial Thickness: 17.5 mm (11/16 inch). Refers to the thickness of the combined material (clock face material and support board the dial is mounted to) that the threaded length of the movement shaft travels through. The hardware adds 1.6 mm (1/16 inch) making the total length of the threaded bushing 19.1 mm (3/4 inch). For finding a replacement, measure the threaded portion of the shaft on the old clock movement. If length is shorter or equal to 19.1 mm (3/4 inch), this is suitable..
• Clock Hands Measurements: Total black spade hour and minute hand length is approx. 63.5 mm (2 1/2 inch), total red second hand length is approx. 69.9 mm (2 3/4 inch). The Q-80 movement will have a step motion that creates a ticking sound, powered by an AA battery..
• Package Contents Include: One easy to assemble quartz clock movement, one hour hand, one minute hand, one second hand, and hand mounting hardware..

Quartex Standard Push-On Movement with Hex Nut - Short Shaft

• Clock Movement Measurements: Total hand shaft length is 14.3 mm (9/16 inch). Total shaft diameter is 7.9 mm (5/16 inch)..
• Maximum Clock Dial Thickness: 3.2 mm (1/8 inch). Refers to the thickness of the combined material (clock face material and support board the dial is mounted to) that the threaded length of the movement shaft travels through. The hardware adds 1.6 mm (1/16 inch) making the total length of the threaded bushing 4.8 mm (3/16 inch). For finding a replacement, measure the threaded portion of the shaft on the old clock movement. If the length is shorter or equal to 4.8 mm (3/16 inch), this is suitable..
• Clock Hands Measurements: Total black spade hour and minute hand length is approx. 63.5 mm (2 1/2 inch), total red second hand length is approx. 69.9 mm (2 3/4 inch). The Q-80 movement will have a step motion that creates a ticking sound, powered by an AA battery..
• Package Contents Include: One easy to assemble quartz clock movement, one hour hand, one minute hand, one second hand, and hand mounting hardware..

AUTOTOOLHOME Gold Self Centering Doweling Jig Kit 2 inch 6PC Drill Guide Bushings Set Adjustable Width Wood Dowel Jig Woodworking Joints Tools

• ... clamping pressure for clamping the workpiece. The jig with rugged aluminum sides holding work securely without damage to the wood..
• There are 4 drill guide holes, along the top of the jig,2 holes accept 7/16" and 1/2" drill bits directly.the other 2 holes accept threaded replaceable steel bushings.Package induldes 1/4" drilling bushing x 2.

Wilmad-LabGlass LG-9444-106 10mm PTFE Stirrer Bearing, Standard Taper 34/45

• Complete assembly includes PTFE stirrer bearing, PTFE bushing, saddle O-ring, threaded heavy wall glass adapter, and top cap. See LG-9501 for polished stirrer rods or LG-9502 for stainless steel rods.

Tel-Tru BQ225 Barbecue Pit Thermometer 2 inch dial and 2-1/2 inch stem 50/550 F

Gold Tip GT Series HD Pin Nocks (Pack of 12), Flo Green

• Recommended for bows shooting over 280 FPS.
• Gold Tip's threaded inserts are precisely machined from only top-grade materials.
• Quality controlled to industry-leading specification tolerances.

Quartex Q-80 Quartz Clock Movement, 3/16” Max Dial Thickness, 5/8" Hand Shaft Length

• Clock Movement Measurements: Total hand shaft length is 15.9 mm (5/8 inch). Total shaft diameter is 7.9 mm (5/16 inch)..
• Maximum Clock Dial Thickness: 4.8 mm (3/16 inch). Refers to the thickness of the combined material (clock face material and support board the dial is mounted to) that the threaded length of the movement shaft travels through. The hardware adds 1.6 mm (1/16 inch) making the total length of the threaded bushing 6.4 mm (1/4 inch). For finding a replacement, measure the threaded portion of the shaft on your old clock movement. If the length is shorter or equal to 6.4 mm (1/4 inch), this is suitable..
• Clock Hands Measurements: Total black spade hour and minute hand length is approx. 63.5 mm (2 1/2 inch), total red second hand length is approx. 69.9 mm (2 3/4 inch). The Q-80 movement will have a step motion that creates a ticking sound, powered by an AA battery..
• Package Contents Include: One easy to assemble quartz clock movement, one hour hand, one minute hand, one second hand, and hand mounting hardware..

Mighty Mite Neck for Strat Guitar Indian Rosewood Fingerboard

• Shaped, inlaid, fretted and finished—feels and plays great.
• Hard rock maple finished in clear satin polyurethane.
• Each neck has a single-action truss rod and traditional "skunk stripe" down the back.
• Peghead is drilled for 6-in-line tuning machines, with 10mm-diameter holes that fit sealed gear tuners with threaded peghead bushing.
• Features 25-1/2" scale length and 9-1/2" fretboard radius (see Product Description for more specs).