ReviewsThreaded Cap Nut

6 Pieces 8/32 Inch M4 12 Inch Threaded Rod with Hex Nuts Set Includes 6 Pcs M4 x 300 mm 304 Stainless Steel Fully Threads Studs Rods and 6 Pcs Thread Hex Nuts for Beaded Garden Stake Rods

  • What You Will Get: the package comes with 6 pieces of 8/32 inch M4 12 inch threaded rods and 6 pieces of M4 hex nuts, 12 pieces or 6 set in total, nice combinations for you to make 6 pieces of fairy garden stakes, as well as other DIY crafts.
  • Detailed Size: threaded studs: thread diameter is M4, and measures approx. 300 mm/ 12 inch in fully length.
  • Hex nut: the coarse thread diameter is M4, pitch: 0.7 mm/ 0.03 inches, flat across width: 7 mm/ 0.28 inch and about 2.8 mm/ 0.11 inch high.
  • Threaded Rods Studs: the threaded steel rod is made of quality 304 stainless steel material, sturdy, and resistant to rust or corrosion, with strong construction, hard to deform or break, which can be applied for a long time, and ideal accessories for assembly fastening, just screw into the threaded nut or threaded hole.
  • Hex Nut: the hex nut can be screwed to this threaded rod well, not easy to slip off, besides, it is also an ideal accessory for fasteners, it is also essential in daily life, just need to screw it to the thread metal rods, bolts and other tools of the same size are fine.
Check Stock

Kitchen Sink Hole Cover, 2\ Faucet Hole Cover Sink Basin Stopper Cover Stainless Steel Blanking Plug for Sink Faucet Hole Leakage Prevention, Matte Black

  • Perfectly Clogging: Kitchen sink hole cover diameter 2" fits most any hole on your sink, perfectly covers unsightly holes in your sink, and also replaces rusty and leaky sink hole covers. Keep the kitchen clean and tidy to prevent water leaks..
  • Durable Material: Faucet hole cover is made of zinc alloy, and the threaded cap nut and backing plate are made of stainless steel. Durable, not easy to corrode, can be used for a long time. Equipped with a rubber gasket for a more secure seal..
  • Easy to Install: Put the sink hole cover over the faucet hole, then tighten the wing nut under the sink. The 2" long threaded shank makes it easy to screw into place. Easy installation without tools and without calling a plumber. The washer holds it securely, no need to worry about it coming loose..
  • Beautify Kitchen: The matte black finish perfectly matches your black faucet sink. Smooth surfaces and stylish finishes make your kitchen more beautiful and tidy..
  • 100% Guarantee: All Ancable products come with our 100% No Questions Asked Guarantee. We care about only putting out high-quality products that satisfy your needs. If you have any questions, please contact us..
Check Stock

TPOHH #6-32 Stainless Steel 18-8 (A2) Serrated Flange Hex Lock Nuts, 24 PCS, DIN6923-6-32

  • Flange operates like a washer to distribute load.
  • Screws onto a bolt, cap screw or threaded rod of the same thread size.
Check Stock

Heavy Duty Nut Cracker Nutcracker Pecan Cracker Walnut Cracker Nut Sheller Nut Pliers Opener Tools Wood Base & Handle

  • Heavy Duty Nut Cracker Nutcracker Pecan Cracker Walnut Cracker Nut Sheller Nut Pliers Opener Tools Wood Base & Handle.
  • 100% Brand new and high quality Nut Cracker,all steel machined construction with attractive wooden base and handle grip..
  • Save money by buying bulk nuts and shelling them yourself,prepares nut meats as you need them.Speed up what formerly was a slow,tiresom chore..
  • Unique design cracks soft shell nuts faster,better and easier.Crack pecans,English walnuts,almonds,filberts and Brazil nuts..
  • Material:Wood,steel Nut Cracker,Size:Approx.21cm*6cm*7cm(L*W*T),Instructions:screw handle tight into threaded lever arm,adjust threaded cone for....
Check Stock

EVIL ENERGY AN6 Flare Cap Tube Fitting Hex Head Port Fitting Adapter 2PCS Aluminum

  • 6AN Flare Cap Tube fitting maximum pressure of the fitting is 4000psi (275bar) and the working temperature range is -65º F to 252º F, manufactured....
  • AN flare caps will block off fuel hose line prevent dirt and debris from entering the external threaded hose fittings and adapters..
  • Female pipe plug nut fitting universal application for Diesel, E85, Water,Air Line. The surface is black anodized for great appearance and....
  • Accessories can be used either temporarily or permanently. Cap block off nuts are 100% reusable..
  • EVIL ENERGY provide this product have 3-month warranty.We value your shopping experience and strive to offer a product and service..
Check Stock

AOWISH Stainless Steel Chain Links (2-Pack) SS Quick Link 1/2''(12mm) Diameter, Heavy Duty Trailer Safety Chain Hook Carabiner Clip - 2,500 LBS W.L.L (Silver/M12)

  • ✔ [THREADED LATCH] - This safety chain hook is equipped with a threaded end and hex nut to provide enhanced security when connecting your safety chains to your trailer hitch..
  • ✔ [RELIABLE STRENGTH] - With high-strength steel construction, this threaded hook is rated for 2,500 lbs working load limit..
  • ✔ [READY TO TOW] - Threaded trailer safety chain hooks are easy to install. Simply unthread the hex nut and link the hook onto the trailer hitch loop before towing. Then, tighten the nut using a wrench..
  • ✔ [WIDE RANGE OF USES] - Safety chain hooks are great for a wide variety of uses, beyond towing. This 1/2-inch diameter snap hook can be used to attach cargo straps or ropes or as a hand winch attachment hook for a quick connection..
  • ✔ [CORROSION-RESISTANT] - The whole body of AOWISH threaded carabineer safety chain hook is made of stainless steel to achieve long-term safety and reliability in harsh environments. It resists rain, dirt, snow, mud and other corrosive elements..
Check Stock

CURT 82932 Threaded Quick Link Trailer Safety Chain Hook Carabiner Clip 1/2-Inch Diameter 16,500 lbs Break Strength

  • THREADED LATCH. This safety chain hook is equipped with a threaded end and hex nut to provide enhanced security when connecting your safety chains to....
  • RELIABLE STRENGTH. With high-strength steel construction, this threaded hook is rated for a breaking strength of 16,500 pounds and a work load limit....
  • READY TO TOW. Threaded trailer safety chain hooks are easy to install. Simply unthread the hex nut and link the hook onto the trailer hitch loop....
  • VERSATILE. Safety chain hooks are great for a wide variety of uses, beyond towing. This 1/2-inch diameter snap hook can be used to attach cargo straps....
  • CORROSION-RESISTANT. To promote long-lasting use and dependable safety, this threaded carabiner safety chain hook is finished with a durable zinc....
Check Stock

ATPEAM Car Steering Wheel Puller | Automotive Steering Wheel Compressor Remover Set | Vehicle Steering Wheel Lock Plate Removal Tool Kit

  • Built to Last: Each piece in this steering wheel kit is constructed from steel with various finishes for maximum strength and longevity that resists rust and corrosion.
  • Function: Remove steering wheels of most vehicles with or without telescoping tilt steering columns.
  • Use to apply equal pressure so you can safely remove steering wheels, Perfect for the home or professional mechanic.
  • Tips: We recommend putting a drop of oil (not included) on the washer that goes between the nut and the locking plate tool when compressing the steering wheel locking plate.
  • Various Steer Wheel Cap Screws: Includes 4 sets of cap screws to be used for various thread requirements. Size of Cap Screws: M8-1.25 X 90 Mm, 3/8"-16 X 3-1/2", 5/16"-24 X 3-1/2", 5/16"-18 X 4".
  • Package Includeds: This steering wheel removal kit includes a steering wheel puller and bolts, non-threaded puller legs, steering wheel locking plate depressing tool, 4 sets of cap screws for various thread requirements and a carrying case for your convenience.
Check Stock

CURT 82901 Threaded Quick Link Trailer Safety Chain Hook Carabiner Clip 5/16-Inch Diameter 8,800 lbs Break Strength

  • THREADED LATCH. This safety chain hook is equipped with a threaded end and hex nut to provide enhanced security when connecting your safety chains to your trailer hitch.Fit Type: Universal Fit.
  • HIGHLY VERSATILE. Add useful, versatile towing options to your vehicle with this class 1 trailer hitch. It provides a standard 1-1/4-inch x 1-1/4-inch receiver hitch, allowing you to tow a small trailer or mount a cargo carrier or bike rack.
  • READY TO TOW. Threaded trailer safety chain hooks are easy to install. Simply unthread the hex nut and link the hook onto the trailer hitch loop before towing. Then, tighten the nut using a wrench.
  • VERSATILE. Safety chain hooks are great for a wide variety of uses, beyond towing. This 5/16-inch diameter snap hook can be used to attach cargo straps or ropes or as a hand winch attachment hook for a quick connection.
  • CORROSION-RESISTANT. To promote long-lasting use and dependable safety, this threaded carabiner safety chain hook is finished with a durable zinc plating. It resists rain, dirt, snow, mud and other corrosive elements.
Check Stock

Prime-Line 9086409 Finished Hex Nuts, Grade 5, 5/8 inch-11, Grade 5 Zinc Plated Steel, (10-pack)

  • Finished nuts are six sided nuts of standard thickness vs heavy duty hex nuts.
  • Screws onto a bolt, cap screw or threaded rod of the same thread size.
  • Use with washers to help distribute the load (not included).
  • Thread Type: Coarse, Thread Class: UNC-2B.
Check Stock

26 Pack 8/32 Inch Threaded Rods with Hex Nuts M4 12 Inch 304 Stainless Steel Fully Rod Threaded, 13 Pcs M4 300mm Right Hand Threads, 13 Pcs Hex Nuts for Hangers, U-Bolts and Beaded Garden Stake Rods

  • 【THREADED RODS PARAMETERS】Thread Diameter M4: 2.8mm/0.11 ''.
  • 【MATERIAL】304 stainless steel material, corrosion resistance, high temperature resistance, rust resistance and good processing performance.
  • 【FULL THREAD & HEX NUT】For assembly and fastening, threaded rod is a fastener reinforced in threaded nut or threaded hole, right-hand threaded rod stud. Hexagonal nuts are an ideal replacement for industrial and construction fasteners, Simply screw on to a bolt of the same thread size, quick and easy..
  • 【APPLICABLE SCENARIOS】Perfect for auto parts, standoffs, bolts and more metal items that need to be fastened.
  • 13 Pcs full threaded rods, 13 Pcs full threaded hex nuts, 26 Pcs in total, perfect for garden stakes decorative beaded garden stakes etc for outdoor decoration..
  • 【PACKAGE LIST】13Pcs M4×300mm threaded rods, 13 Pcs M4 Stainless Steel Fully Threaded Hex Nuts, which can be cut, heated, drilled and used in multiple dimensions..
Check Stock