ReviewsThreaded Inserts For Wood

WoodRiver 1/4 x 20 tpi Jig Hardware Kit 149-piece

Kit includes assortment of 1/4" x 20 TPI threaded knobs, handles and inserts.
Steel plated studs and threaded inserts ensure reliable holding power.
Plastic molded knobs provide comfortable grip -.
WoodRiver is proudly made by Woodcraft, America’s leading supplier of saws, planes, power tools, hand tools, wood stain and paint, routers, sanding,....

Check Stock

1/4-20 Threaded Insert for Wood Hex Drive Threaded Wood Inserts 1/4 Wood Nuts 40 Pieces

1/4-20 threaded insert x 15mm length, 6mm allen wrench included, best 1/4"-20 threaded insert wood insert furniture screw in nut connector screws..
Insert head ⌀: 0.461" / 11.7mm, body ⌀: 0.315" / 8mm, threads ⌀: 0.410" / 10.4mm..
Threaded inserts are easy to install, simply drill the right size hole and Install with hex key provided..
In Softer wood, the outside threads cut easily into the wood, simply drill a Appropriately Sized Hole (8.5mm, 9mm, 9.5mm, 3/8" drill bit) for the body of the insert, then screw insert into the place..
In very Harder wood such as white oak or maple, drill a hole size (3/8.

Check Stock

50 Pieces 1/4-20 Threaded Inserts for Wood Nutsert Furniture Screw-in Nut 15mm Length Hex Drive

1/4-20 threaded inserts for woodworking applications, 15mm length, hex drive Allen key included..
Threaded inserts are easy to install, simply drill the appropriately sized hole and Install the inserts with the hex key provided or other optional drive tools you have..
1/4-20 threaded inserts are the ideal solution for softwood, hardwood, plywood, MDF, and composition board..
Threaded inserts head diameter: 0.461″ / 11.7mm, body diameter: 0.315″ / 8mm, threads diameter: 0.410″ / 10.4mm..
In Softwood, recommended drill bits for these threaded inserts are 8.5mm, 9mm, 9.5mm / 3/8″. In hardwood such as white oak or maple, recommended drill bits are 9.5mm, 3/8 inch, or 10mm..

Check Stock

E-Z Lok Threaded Insert, 18-8 Stainless Steel, Helical, #6-40 Internal Threads, 0.138\ Length (Pack of 10)

THREADED INSERT FOR METAL – E-Z LOK Coil Thread Inserts for metal. Also known as wire thread inserts or helical threaded inserts..
QUICKLY REPAIR DAMAGED THREADS – Quickly repair damaged threads or reinforce tapped holes in soft metals with this steel thread insert..
18-8 STAINLESS STEEL WIRE – 18-8 stainless steel threaded inserts that are resistant to corrosion and can withstand temperatures to 800°F..
FOR USE WITH APPLICATIONS – The threaded inserts are designed for use with soft metals: aluminum, cast iron, magnesium, etc..
STRONG THREADS MADE EASY – Before installation, the metal threaded insert diameter is larger than the hole and then reduced during installation..

Check Stock

E-Z LOK Threaded Insert for Plastic Straight Flanged Brass Thread Inserts 10-32 Pack of 50

THREADED INSERTS FOR PLASTIC – E-Z Sonic ultrasonic thread inserts for plastic are designed for post-molding installation in thermoplastic materials..
EASY INSTALLATION – Install these metal threaded inserts ultrasonically or with a heat driver. The tapered design simplifies installation..
FOR USE WITH APPLICATIONS – The threaded inserts for plastic are designed for putting standard machine threads in 3D printed and thermoplastic parts..
AVAILABLE STYLES – Straight E-Z Sonic inserts are available in flush or flanged configuration to meet your material thickness requirements..
STRONG THREADS MADE EASY – High-quality brass threaded inserts are available with both inch and metric threads..

Check Stock

E-Z LOK Threaded Insert for Plastic Straight Flanged Brass Thread Inserts 8-32 Pack of 100

THREADED INSERTS FOR PLASTIC – E-Z Sonic ultrasonic thread inserts for plastic are designed for post-molding installation in thermoplastic materials..
EASY INSTALLATION – Install these metal threaded inserts ultrasonically or with a heat driver. The tapered design simplifies installation..
FOR USE WITH APPLICATIONS – The threaded inserts for plastic are designed for putting standard machine threads in 3D printed and thermoplastic parts..
AVAILABLE STYLES – Straight E-Z Sonic inserts are available in flush or flanged configuration to meet your material thickness requirements..
STRONG THREADS MADE EASY – High-quality brass threaded inserts are available with both inch and metric threads..

Check Stock

40 Pack Threaded Insert Nutsert, 1/4\-20 x 15mm Screw in Nut Threaded Wood Inserts, for Wood Furniture(with 1/4\ Allen Wrench)

Size: Insert head diameter: 0.445" (11.3mm), body diameter: 0.315"(8mm), threads diameter: 0.410"(10.4mm),1/4-20 threaded insert length: 0.591"(15mm).
Material: High quality carbon steel with high hardness, can keep a long-lasting hold..
Application: These furniture screws are suitable for wood furniture, hardwood or solid wood, such as furniture combinations(Threaded inserts are used to drill the right size hole and Install with hex key provided, and screw in nut connector screws)..
Recommended drill bit for wood: For Soft Wood-- 3/8" (8.5mm/9mm)dirll bit in soft wood, the threads cut will easily go into the wood.
For Hard Wood-- 3/8" (10mm),pls drill a hole that close to the outside threads diameter.If the hole is too small, Screwing it may split the wood or insert. If you are not sure the harness of the wood material, pls drill a proper sized hole for test before installing it..
Package included: 40 *1/4-20 Threaded Insert Nutsert + 1*1/4"(6mm) Allen Wrench..

Check Stock

E-Z LOK Threaded Insert for Plastic Straight Flanged Brass Thread Inserts 1/4-20 Pack of 50

THREADED INSERTS FOR PLASTIC – E-Z Sonic ultrasonic thread inserts for plastic are designed for post-molding installation in thermoplastic materials..
EASY INSTALLATION – Install these metal threaded inserts ultrasonically or with a heat driver. The tapered design simplifies installation..
FOR USE WITH APPLICATIONS – The threaded inserts for plastic are designed for putting standard machine threads in 3D printed and thermoplastic parts..
AVAILABLE STYLES – Straight E-Z Sonic inserts are available in flush or flanged configuration to meet your material thickness requirements..
STRONG THREADS MADE EASY – High-quality brass threaded inserts are available with both inch and metric threads..

Check Stock

E-Z Lok Threaded Insert, 18-8 Stainless Steel, Helical, M8-1.25 Internal Threads, 8mm Length (Pack of 10)

THREADED INSERT FOR METAL – E-Z LOK Coil Thread Inserts for metal. Also known as wire thread inserts or helical threaded inserts..
QUICKLY REPAIR DAMAGED THREADS – Quickly repair damaged threads or reinforce tapped holes in soft metals with this steel thread insert..
18-8 STAINLESS STEEL WIRE – 18-8 stainless steel threaded inserts that are resistant to corrosion and can withstand temperatures to 800°F..
FOR USE WITH APPLICATIONS – The threaded inserts are designed for use with soft metals: aluminum, cast iron, magnesium, etc..
STRONG THREADS MADE EASY – Before installation, the metal threaded insert diameter is larger than the hole and then reduced during installation..

Check Stock

E-Z LOK Threaded Insert for Plastic Tapered Single Vane Brass Thread Inserts 1/4-20 Pack of 50

THREADED INSERTS FOR PLASTIC – E-Z Sonic ultrasonic thread inserts for plastic are designed for post-molding installation in thermoplastic materials..
EASY INSTALLATION – Install these metal threaded inserts ultrasonically or with a heat driver. The tapered design simplifies installation..
FOR USE WITH APPLICATIONS – The threaded inserts for plastic are designed for putting standard machine threads in 3D printed and thermoplastic parts..
AVAILABLE STYLES – Tapered E-Z Sonic inserts are available in single or double vane configurations to meet your material thickness requirements..
STRONG THREADS MADE EASY – High-quality brass threaded inserts are available with both inch and metric threads..

Check Stock

E-Z Lok Threaded Inserts For Metal Assortment Kit Carbon Steel Metric Internal Threads M3-0.5 M4-0.7 M5-0.8 M6-1.0 M8-1.25 50 pieces

THREADED INSERTS FOR METAL – E-Z LOK Threaded Insert Assortment Kit for metal. Threaded inserts for putting strong, machine threads in metal..
QUICKLY REPAIR DAMAGED THREADS – Quickly repair damaged threads or reinforce tapped holes in metals with this thread repair kit..
AVAILABLE OPTIONS – Kit is available in carbon steel threaded inserts and stainless steel threaded inserts that are easy to install with standard tools..
FOR USE WITH APPLICATIONS – The metal threaded inserts are designed for use with soft metals: aluminum, cast iron, magnesium, etc..
STRONG THREADS MADE EASY – Simply drill the hole with a standard drill. Tap the hole with a standard tap. Turn in the insert with a screwdriver, bolt/jam nut, or an E-Z LOK drive tool..

Check Stock