ReviewsThreaded Stud Hole Plugs

Loos CT-S44XXFF-0840 Cable Assembly, Stainless Steel, 1/8\

Pool plugs: you can get 3 pieces black rubber expansion plugs with 3 sizes, 1 inch, 1.5 inches and 2 inches, which can meet your daily uses and....
Widely applied: this pool plug is applied as a pipe plug, which can return and prevent from entering pipes in winter.
Stable performance: the winter plug for pool is made of rubber, which is stable and firm.
Moreover, this threaded backwater plug of swimming pool is....
Practical usage: these expandable rubber plugs can protect your swimming pool pipes by preventing from entering the pipes.
Bring convenience for your daily life: these pool skimmer plugs can be applied as pipe plugs to plug storage devices, and threaded pool return pipe....

EASILY ADD UNDERWATER LED LIGHT to your boat in minutes. No drilling hole in your boat! Great for night-time cruising, swimming, and fishing..
Fish are attracted to Green Light! Ultrabright 1800 lumen LED underwater light replaces your current threaded drain plug and creates a fun mood while offering added visibility and safety at night..
Waterproof quick-connect plug and storage bag for easy removal and storage when trailering..
Stainless Steel, 27 watt, 9 CREE LED, Fits all 1/2" threaded boat drain plugs.
PICK A COLOR. 160 degree flood of light projection. Professional Grade-Don't be fooled by cheaper lights that aren't as bright. This quality LED has a 50,000 hour life, a 3 year warranty, and an overheat protected driver..

【Repairing the threaded hole】You can repaire the threaded hole in a cost‑effective manner.Repairing the threaded hole in a cost‑effective manner when a thread error occurs or a damaged female threaded hole is repaired,used for frequent disassembly, it can greatly improve the life of thread..
【Convenient convertion】Wire thread inserts are also called threaded sheaths, stainless steel threaded sleeves, wire sleeves.The product works for convert between metric and inch thread holes, which is convenient and fast..
【Standard female thread 】The repair nut is an industrial fastening part, which is mostly used with screws or polts.If you fit the wire screw set in the screw hole of the workpiece of aluminum alloy and other materials,will forming a high‑strength, wear‑resistant, high‑accuracy standard female thread..
【Stainless steel】The thread inserts has standard size, clear thread, more accurate repairing thread movable teeth, adopts 304 stainless steel material, high hardness, good toughness and wear resistance, good corrosion resistance, and is not easy to break when repairing thread hole..
【Customer support】We attach importance to the feedback from every customer and always provide excellent customer service..

Approx 13/16" in diameter at the threaded portion.
Triple snap (push-to-close) tethered cap. Includes: 2 drain plugs with push-to-close cap and nut with gasket & washer..
Easy installation: Place plug through cooler, screw down gasketed nut.
Triple-snap cap seals tight to prevent leaks, tethered cap helps prevent cap loss.
DOUBLE CHECK your cooler's drain plug hole size and cooler wall thickness. This is NOT a universal drain plug for Igloo coolers, as there are other sizes available..

Premium Dinse-type insulated cable connector pair (male/female) and female terminal adapter (threaded stud to Dinse male connector) for use with welding cable connection in welders from Lincoln, Miller, ESAB, etc..
Insulated Dinse-type male connector is with .355" pin diameter (25-series) and 1/2" pin diameter (35/50/70-series). 45° angle terminal adapter with 17/32" stud hole and female acceptor for 1/2"-pin male plug..
Compatible with Miller 25-70 series Dinse twistlock connectors/adapters and fit other mainstream welders (Lincoln, ESAB, etc.) with Dinse connection: Miller 25-series (small 25-mm, #4-#3, P/N 127836/127835).
50-series (35-50mm, #2-1/0, P/N 129527/129526).
70-series (50-70mm, 1/0-3/0, P/N 134460/136600). Female terminal adapter is compatible with Miller 232728 (50/70-series, 1/2"-pin)..
All connectors/adapters are equipped with heat and oil resistant covers as well as cable connection screws and copper splice caps..
U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..

Stud fits most popular binoculars 1/4-20 threads on the market Vortex Swarovski Zeiss Nikon.
Stud only, this works with the Mutnt Binocular Tripod Adapter great for multiple pairs of Vortex.
extra Stud is best used when you have 2 or more pairs of binoculars and want to change between them fast.
10x42 and a pair of 18x56 no problem with the extra stud to fit on your Muntnt Tripod Adapter.
The Box 1 tripod adapter stud, material: nitrated steel, .5oz, Length 1.36in, Threaded .35in, 2 spacers and 1 allen wrench.

【FOR DJI RS 2/RSC 2】SmallRig Monitor Mount 3026 is specially designed for DJI RS 2/RSC 2 gimbal. This mount is designed for adding accessories on both sides of the stabilizer, such as monitor, light, sound receiver, wireless device, action camera, etc..
【FIRM LOCKING】The monitor mount can be installed on two sides of the stabilizer by quick release NATO clamp and features an anti-removal stud to protect your devices from falling..
【165° TILT RANGE】SmallRig 3026 is adjustable for 165° and can be stopped at any angle without tools. With its compact structure and consistent design to match RS 2, it is a perfect match with the stabilizer..
【MULTIPLE MOUNTING OPTIONS】There are two 1/4"-20 threaded holes on top of the monitor mount, and one 1/4 threaded hole on side of it, which can be attached with Magic Arm 2163 for action camera or other rigs. On top and bottom of it, there is one cold shoe mount which can be attached with a sound receiver, microphone, light, etc..
【HIGH CUSTOMIZATION】Matte surface perfectly matches with the industrial design of stabilizer. ( Please note: the max payload is 1.5kg. ).