ReviewsThreaded Water Pipe

Intermatic PE24VA 24-Volt Valve Actuator

  • Hex plug for closing the end of a pipe or fitting.
  • Male National Pipe Taper (NPT) threads for connecting to a female threaded pipe.
  • Nylon 6-6 for high strength and flexibility, abrasion resistance, and a higher melting temperature than Nylon 6.
  • Meets NSF/ANSI standard 61 for drinking (potable) water.
Check Stock

VAlinks Automatic Drip Irrigation Watering System with Digital Timer, Sprinkler Timer Self Watering Kits Garden Irrigation, 33 ft 1/4' Distribution Tubing Hose & Nozzle Sprayer for Lawn

  • 【Automatic Drip Irrigation Kits】Using this 10-meter long water pipe and atomizing nozzle, water all the plants at once. Package included 1* Watering Timer, 10m 1/4" PVC pipe, inner diameter 0.16inch (4mm), outer diameter 0.28in (7mm).
  • 1*Faucet connector, 2* threaded interface, plugs & waterproof tape..
  • 【Save Water and Time】 This plants drip irrigation system can reduce water usage up to 70% compared to manual watering. Every nozzle could be adjusted individually, it can meet the water demand of different plants at one time..
  • 【Easy To Install】 Install the sprinkler timer directly on the faucet and fix it with tape. If the faucet size does not fit, install the universal connector equipped on the sprinkler timer (Fits most 1/2", 3/4" threaded faucets, make sure the faucet fits before buying)..
  • 【Battery Powered】Operates on two AA alkaline battery (not included). Please follow the instructions to debug the timer. This drip irrigation system is suitable for irrigation applications in gardens, yards, greenhouses, flowerbeds, and etc..
Check Stock

Legines Brass Pipe Fitting Long Nipple, 1/8' NPT Male x 1/8' NPT Male Extender Straight Connector, 1-1/2'Length 1200psi (Pack of 5)

  • Long nipple for connecting two threaded pipes and extending pipe length.
  • 1/8" Male National Pipe Taper (NPT) threads for connecting to 1/8" female threaded pipes.
  • Legines pipe fittings are made of CA360 or CA377 brass, not ordinary copper alloy, and meet SAE standard, have dryseal threads, forgings & extruded..
  • Operating pressure of our fittings is up to 1200psi, more higher than other general fittings. Temperatures range from -53 to 121 degrees C (-65 to 250 degrees F).
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

XuSha US Stock Commercial Grease Trap 25lbs 13GPM Interceptor Stainless Steel for Restaurant Kitchen, Side Inlet

  • ❤US Stock: You will get it within 3-5 days.【DIMENSION】- 24" x 12" x 11" (L * W * H). Connection size (inlet & oulet): 1.77 Inches / 5 cm. Length of the threaded pipe: 78 cm / 30.4 Inches. Flowing speed up to 13 Gallons Per Minute (G.P.M.).
  • ❤【MATERIAL】- Made of heavy duty 1.2 mm thickness stainless steel, which is strong and durable, anti-rust, anti-corrosion, not easily deformed. The removable filter basket can easily remove the collected residual waste. The threaded pipe is tightly installed with the grease trap, and the locking devices on both sides to prevent leakage..
  • ❤【PRINCIPLE】- Waste water flows into the grease trap from the sink, the fats, oils and grease will rise to the surface and be collected between the baffles, and the solid particles will sink. Food particles and grease are kept in the device. The removable filter basket can easily remove residual waste. The side outlet helps to take out any liquid for future clean up when needed..
  • ❤【EASY TO INSTALL】- Connect the pipe run from the sinks and dishwasher to the Grease Trap inlet.Make sure to place it on a flat floor. Ideal for kitchen, restaurant, factory, school or small sink or dishwasher applications..
  • ❤【PRECAUTIONS】- 1. When heating with electricity, water m....
Check Stock

Lifegard Aquatics QL-80 UV Sterilizer

  • Solid cap features Clear View Port to allow visible light (no UV) to pass through and indicate bulb is operating.
  • The replaceable Internal Overflow Pipe automatically vents air from chamber and directs 100-percent of the water flow past UV light.
  • The Splash Boot creates water resistant seal around electrical connection.
  • Its unique 4-pin connectordesign allows easy bulb replacement without shutting down the system.
  • All Lifegard Mechanical, Chemical, Heater, and UV Sterilizers include 3/4-inch threaded reducing bushings if threaded installation is desired.
Check Stock

(60 pcs) M8-1.0, DIN 908, Metric, Pipe Plugs, Hex Socket Drive, Straight Thread, Steel, Plain

  • Threaded pipe plugs are designed to close the ends of internally threaded pipes and fittings..
  • Also known as Threaded Pipe Fittings or Threaded Screw Plugs..
  • An internal hex socket drive is also known as an Allen drive..
Check Stock

SHYOKO 1-1/2 Inline PVC Ball Valve Compact T-Handle Water Shut-Off Valves Female Thread [Available 1/2 ,3/4 ,1 ,1.25 ,2 ]

  • PVC MATERIAL - PVC for corrosion resistance, high strength, and less weight than fittings made from metal, saving cost and accelerating the project....
  • THREAD & 150 WOG - Female threaded for connecting to male threaded pipe fittings. 150WOG working pressure, suitable for irrigation and water supply..
  • SAFETY - T handle for manual on/off control, easy operation.
  • Santoprene seats and stem packing reduce the risk of leakage..
  • ASTM - 1-1/2’’ ball valve, suitable for indoor and outdoor use like with cess-pipe, landscape and irrigation, pool, cold water, venting, waste....
  • DURABLE - Each valve individually tested for maximum safety blow-out proof stem, ageing resistant and long service life..
Check Stock

Valterra White Gravity City Water Fill Dish Check Valve RV Trailer Marine

  • Valterra gravity/city water hook up. This is used for filling the water holding tank with gravity (meaning it does not have a threaded connection) and it has a city water connection to hook up a garden hose..
  • Parts are constructed with UV stabilized Plastic.
  • Connects to 1 1/4" ID or 1-3/8" hose for gravity fill, Connect to 1/2" threaded pipe fitting for city connection.
  • Has connection for air vent with screen 1/2" id hose.
Check Stock

PTFE Plumbers Tape, VCELINK Teflon Water Sealant Thread Tape, 520\ Length 1/2\ Width, Industrial Plumbing Tape Stop Leaks for Shower Heads and Pipe Threads (2 Rolls）

  • VCELINK Teflon Tapes can be used to connect threaded pipes. A good solution for enhancing the tightness of pipes..
  • WIDELY APPLICABLE: Plumbing tape is designed for home and threaded pipe applications. Suitable for the most threaded-installing piping devices, including washing machine pipes, faucets, shower nozzles, etc..
  • GOOD QUALITY: the pipe sealant tape has an excellent character of sealing, ductility, high-temperature resistance, and corrosion resistance. And the thickness which is 0.09mm is moderate..
  • EASY TO USE: Simply wrap the waterproof Teflon tape around the threaded male end of the pipe or connector and screw it in. The tape can maintain the original width.
  • Less stickiness on the fingers and is easy to remove..
  • PACKAGE AND AFTER-SALES: 2 Rolls 520" length by 1/2" width PTFE pipe sealant tape. 18 months warranty for quality problem..
Check Stock

Carvedexquisitely Bulkhead Water Tank Fitting,1/2" NPT Female Thread,304 Stainless Steel Thru-bulk Fitting

  • Size:1/2" NPT female threaded,the actual diameter of 1/2" thread is 0.84 inch,NPT thread size is not the actual diameter, it is only nominal pipe size..
  • Bulkhead fitting are made of stainless steel, which is corrosion-resistant, rust-proof and has a long service life..
  • Note:The lock nut is Left-hand thread,and the external thread is used for the lock nut and cannot be connected to the pipe..
  • Wide range of uses: commonly used in water tanks, water towers, water inlets and outlets, self-made water storage buckets, rain buckets, and can also be used in various pipes, hoses, pipe fittings or faucets..
  • Bulkhead OD 25mm, suitable for about 25mm ID hole..
Check Stock

XINGYHENG Hex Brass Female Pipe Fitting Thread Straight Pressure Reducing Valve Connector CGA-320 to CGA-580 - CO2 Reducing Pipe Nut Fittings NPT1/4 Tank to Argon Pressure Regulator

  • 1.Durable material: The pipe fittings are made of brass and are resistant to corrosion, high temperature ductility and low magnetic conductivity., it is solid, durable, stable and reliable, with high hardness.
  • 2.Strict standards: Standardized processing, complete character specifications. The specifications includes brass pipe fitting with 24MM/0.94" Length 1/4 Female G threads..
  • 3.Perfect detail processing: Keep improving, brass plating on the surface, smooth and durable, the mother-child interface is smooth, not easy to fall off, and the detail processing is perfect and beautiful. Hex nut head, regular shape, thick material, perfect arc design, rounded edges, no burrs..
  • 4.Excellent performance: Brass pipe fitting is designed with female thread and hexagonal shape. For connecting Male threaded threaded threaded pipe, Matching threaded screw. good plastic toughness, small connection deformation, reliable force transmission, good fatigue performance, easy to check..
  • 5.Wide application: Copper pipe can be connected to copper, brass, plastic, aluminum and welded steel as fast joints, easy and fast connection. Widely used in Use in plumbing connections, compressed air, hydraulic, gas and other applications, hex nut for easy tightening and loosening..
Check Stock