ReviewsThreaded Wing Nut

Zen Water - Water Filter System, Portable Water Purification System, 4-Gallon Countertop Dispenser

  • Transform tap water into clean, healthy, alkaline mineral water. o-rings and the wing nut are attached to the stem of the ceramic filter.
  • 5 Functions Combined in 1 System: Filter, Purify, Mineralize, Alkalize and Magnetize.
  • Mountain-spring fresh taste by the bottle or cup. Our advanced system's enlightened approach combines activated charcoal (carbon) with far-infrared ceramic, silica sand, and mineral-imbuing stone cartridges.
  • Ceramic filter will last 1,000 gallons or 1 year.
  • 5-Stage mineral filter will last 500 gallons or 6 months.
  • The ceramic O ring is attached to the stem of the ceramic filter. The Magnetic nut is attached to the stem of the Magnetic Tap/Spout. Simply turn the ceramic filter upside down,the o-rings and the wing nut are attached to the stem to prevent the wing nut from scratching/damaging the surface of the ceramic.
  • The Countertop system comes complete with: Micro-Ceramic Filter, 5-Stage Mineral Cartridge Filter, Maifan Mineral Stones and Magnetized Spigot. The System can be used with or without the base. Not recommended for use with microbiologically unsafe water. o-rings and wing nut are attached onto the stem of the ceramic filter..
Check Stock

LONKER (2pc) Power Wing Nut Driver Set,Slot Wing nuts Drill Bit Socket Wrenches Tools Set,1/4\ Hex Shank Drills Bits for Panel Nuts screws eye C hook bolt (2-pcs)

  • This wing nut driver is a perfect tool that works with any power drill (1/4 inch hex shank). The total length of the tool is about 6.55cm(2.6 inch).
  • the outer diameter of the socket is about 17.8mm(0.7 inch).
  • and the slots on the drill bit tool is 4mm(1.55 inch) wide..
  • 2pcs in a package - This drills nut driver bit designed to tighten or loosen wing nuts, bolts, hooks quickly and effectively when installing hurri shutters/panels or doing other projects, and saves lots of your time and get your job done more faster..
  • Just pop it into a power screwdriver and get the wing nut / shutters installed without concern about spraining your thumbs by using other hardware tools, saves wears and tears on your fingers..
  • quickly to tighten simply turn the wing nut by power drill. your Impact Driver or Drill you drive just about any wing nuts bolt or C head Eye hook screw up to 5x faster than you can by hand.
  • Hurricane Wing Nuts Driver Set A must have tools for hurricane/Snowstorm protection for windows doors hardware.
Check Stock

HighWind Solutions 1/4-20 Wide Washered Wing Nut for Hurricane Panels/Shutters by Mountwell Hardware (25 Pieces)

  • ✔ QUALITY: Premium quality zinc die cast construction that will not rust or corrode..
  • ✔ PURPOSE: Great for use with hurricane panels that utilize the “F” track design and with anchored bolts..
  • ✔ SPECS: Washer Diameter: ⅞” | Threaded Length ¼”.
  • ✔ INSTALLATION: The long wings provide for easy installation by hand and for a snug fit with the wing nut driver (available for purchase).
  • ✔ GUARANTEE: At Mountwell Hardware we take pride in our product quality and craftsmanship and this is backed by our 100% money back guarantee..
Check Stock

WREOW Wing Nut Driver Set 1/4\ Hex Shank Slot Wingnut Drill Bit Socket Wrenches Tools Set for Panel Nuts,Screws Eye C Hook Bolt and Q-Hanger (3 PACK)

  • This compact wing nut driver is made from CR-V steel, highly strong and sturdy..
  • These wing nut driver sets are designed to tighten or loosen wing nuts, bolts, hooks quickly and effectively when installing hurricane shutters/panels or doing other projects, and saves lots of your time and get your job done more faster..
  • Just pop it into a power screwdriver and get the wingnut / shutters installed without concerning about spraining your thumbs by using other hardware tools, saves wears and tears on your fingers..
  • Quickly to tighten and simply turn the wing nut by power drill. Works on any wing nuts bolt or C head Eye hook screw up to 5x faster than you can by hand..
  • The total length of the tool is about 6.55cm(2.6 inch).
  • the outer diameter of the socket is about 17.8mm(0.7 inch).
  • and the slot cutout is 4mm(0.157 inch) wide..
Check Stock

12-18 inch Adjustable Paint Roller Frame with 12" Painter's Choice Roller Cover,Large Paint Roller for Ceiling Wall Painting

  • 12 - 18 inch Adjustable Screw-fit Paint Roller Frame set, includes 1 x FREE 12" Paint Roller Sleeves..
  • Extra strength steel wing nut design, Use on large areas such as driveways, concrete, decks, walkways, blacktop.
  • The adjustable paint roller frame features a heavy-duty threaded comfort grip, Screw-fitting attaches to all our screw-fit extension poles.
  • Fits paint rollers from 12 inches up to 18 inches.
  • Heavy-duty plastic contoured grip for comfort,Compatible with screw-on extension poles.
Check Stock

PANOVO (2pc) Power Wing Nut Driver Set,Slot Wing nuts Drill Bit Socket Wrenches Tools Set,1/4\ Hex Shank Drills Bits for Panel Nuts screws eye hook bolt

  • 2pcs in a package - This drills nut driver bit designed to tighten or loosen wing nuts, bolts, hooks quickly and effectively when installing shutters/panels or doing other projects, and saves lots of your time and get your job done more faster..
  • quickly to tighten simply turn the wing nut by power drill. your Impact Driver or Drill you drive just about any wing nuts bolt or head Eye hook screw up to 5x faster than you can by hand..
  • Just pop it into a power screwdriver and get the wingnut / shutters installed without concern about spraining your thumbs by using other hardware tools, saves wears and tears on your fingers..
  • This wing nut driver is a perfect tool that works with any power drill (1/4 inch hex shank). The total length of the tool is about 6.55cm(2.6 inch).
  • the outer diameter of the socket is about 17.8mm(0.7 inch).
  • and the slots on the drill bit tool is 4mm(1.55 inch) wide..
  • Wing Nuts Driver Set A must have tools for Snowstorm protection for windows doors hardware.
Check Stock

Goldblatt Drywall Sanding Block Hand Sander with Handle Sandpaper Holder Tool for Wood Drywall Metal Auto Body Polishing

  • PLATE SIZE & MATERIAL - Measures 9.5-inch x 3.1-inch. Made of hard aluminum, features with heavy duty foam for sanding cushion. Reinforced tempered....
  • COMFORTABLE HANDLE - PP+TPR, cushioned rubber soft grip reduces fatigue and provides no-slip grip, easy for one-handed operation.
  • WING NUT DESIGN - Screw clamp design holds abrasive sheets firmly. Fits half sheet of standard sandpaper or use with die-cut.
  • HOW TO CHANGE THE SANDPAPER - Step 1: Unscrew the wing nut, open the clip. Step 2: Insert sanding sheet under clip and screw the wing nut. Step 3:....
  • WIDE APPLICATION - For use with die-cut or a half sheet of standard sandpaper. Great for drywall sanding, flat surface of wood, metal, automotive,....
Check Stock

Pagow Deep Power Wing Nut Driver Set- Slot Wing Nuts Drill Bit Socket Wrenches Tools Set Hex Grooved Socket for Panel Nuts Screws Eye C Hook Bolt Q Hanger 1/4 Hex Shank 2

  • Size: this steel wing nut driver is a perfect tool that works with any power drill (1/4 inch hex shank). The total length of the tool is about....
  • This drills nut driver bit designed to tighten or loosen wing nuts, bolts, hooks quickly and effectively when installing hurri shutters/panels or....
  • Just pop it into a power screwdriver and get the wingnut / shutters installed without concern about spraining your thumbs by using other hardware....
  • Quickly to tighten simply turn the wing nut by power drill. your Impact Driver or Drill you drive just about any wing nuts bolt or C head Eye hook....
  • This nuts tools A must have for hurricane Snowstorm prone areas.
Check Stock

6 Pieces 8/32 Inch M4 12 Inch Threaded Rod with Hex Nuts Set Includes 6 Pcs M4 x 300 mm 304 Stainless Steel Fully Threads Studs Rods and 6 Pcs Thread Hex Nuts for Beaded Garden Stake Rods

  • What You Will Get: the package comes with 6 pieces of 8/32 inch M4 12 inch threaded rods and 6 pieces of M4 hex nuts, 12 pieces or 6 set in total, nice combinations for you to make 6 pieces of fairy garden stakes, as well as other DIY crafts.
  • Detailed Size: threaded studs: thread diameter is M4, and measures approx. 300 mm/ 12 inch in fully length.
  • Hex nut: the coarse thread diameter is M4, pitch: 0.7 mm/ 0.03 inches, flat across width: 7 mm/ 0.28 inch and about 2.8 mm/ 0.11 inch high.
  • Threaded Rods Studs: the threaded steel rod is made of quality 304 stainless steel material, sturdy, and resistant to rust or corrosion, with strong construction, hard to deform or break, which can be applied for a long time, and ideal accessories for assembly fastening, just screw into the threaded nut or threaded hole.
  • Hex Nut: the hex nut can be screwed to this threaded rod well, not easy to slip off, besides, it is also an ideal accessory for fasteners, it is also essential in daily life, just need to screw it to the thread metal rods, bolts and other tools of the same size are fine.
Check Stock

2 pcs Power Wing Nut Driver,Wing Nut Drill Bit Socket Wrenches Tool 1/4 Inch Hex Shank for Panel Nuts Screws Eye C Hook Bolt 1PCS

  • This steel wing nut driver is a perfect tool that works with any power drill (1/4 inch hex shank).
  • The total length of the tool is 6.55cm(2.6 inch).
  • the outer diameter of the socket is 17.8mm(0.7 inch).
  • and the slot cutout is 4mm(0.157 inch) wide.
  • Designed to tighten or loosen wing nuts, bolts, hooks quickly and effectively when installing hurricane shutters/panels or doing other projects, and....
  • Just pop it into a power screw driver and get the wings nut / shutters installed without concern about spraining your thumbs by using other hardware....
Check Stock

Quickie 24-Ounce Heavy-Duty Wet Mop

  • 56-inch commercial grade hardwood handle.
  • 56-Inch commerical grade hardwood handle.
Check Stock