ReviewsThree Phase Power Meter

Things to Remember in Using Your Thought Power for the Production of New Conditions

power including active power, non-active power, and power factor.
Remote access to measurements via the Fluke Connect Condition Monitoring software.
Graphs show trends and fluctuations of the measurements during the monitoring period.
and alarm settings notify users when measurement values are outside user-set thresholds.
3540 FC Three-Phase Power Monitor is portable, wireless, battery powered, and easy to install.

Motor Speed Controller Brushless Controller with Hall-less.Full SMD process,stable performance,humanized design, interface all adopts terminal blocks..
"Voltage 5-50V high power 380W DC three-phase high-speed brushless sensorless controller. ".
Standard heat sink,onboard speed regulating potentiometer，you can use it when you have power on..
DC three-phase high-speed brushless sensorless controller recognizes PWM signal input, amplitude 3-5V supports PLC0-5V analog quantity, input control.
"Size-Length 63MM * width 45MM * height 31MM,Over-temperature protection:yes (half the over-temperature power) Maximum speed:224000 RPM (2 pole motor),74000 RPM (6 pole motor),40000 RPM (12 pole motor), 35000 RPM (14 pole motor).".

ATO 110v vfd, single phase 110v/120v input, single phase or three phase 220v output, achieve to run 220v AC motor on single phase 110v/120v power supply.
【Voltage& Frequency】Input voltage: 1 phase 120V AC ±15%, Input frequency: 50Hz/60Hz,Output voltage: 1 phase or 3 phase 220V AC ±15%, Output frequency: 0.00~400.00Hz.
【APPLICATION】ATO 7.5 hp 5.5kW variable frequency drive Can be widely applied to drive the AC motor, such as fans, pumps, power tools, etc.
【TIPS】 To protect the variable frequency drive and Motor, you need an upstream protection, add a line-choke upstream the VFD, this will reduce the current transients seen by the input of the VFD.
【CUSTOMER FIRST】If you have no experience in driving a VFD, be sure to refer to the instructions before operating a VFD.If you are not sure about the size or have any issue about the product or service, please don't hesitate to email us. We will answer you within 12h.

ELECTRIC METER – State-of-the-art, fully solid-state kWh meter with 800 pulse per kWh pulse output..
SINGLE PHASE – Up to 100 amps, 120/240-volt, 3-wire, 60Hz..
ACCURATE – 1% accuracy class, LCD readout in hundredths of a kWh, to 99999.99 kWh..
COMPACT – Simple DIN-rail mounting designed for symmetrical load..
LCD DISPLAY – Non-resettable LCD display. Usage data is maintained through power outages..

Utilizes revenue-grade 0.3% accuracy class 0.1A secondary solid core current transformers (CTs) that conform to all applicable ANSI requirements.
Up to three sets of CTs per phase can be paralleled per meter without the need for a meter multiplier.

The meter can only measure the active power(real power). It doesn’t show Apparent power. If you measure power from a DC-AC inverter please make sure it’s PURE SINE WAVE. Otherwise the meter can be burnt or melted.
Voltage test range: One-Phase 80~260V AC Power, 50/60HZ.
Store energy data when power off(can be reset)..
Large-screen LCD (display voltage, current, active power, energy at the same time)..
The blue backlight can be turned on/off manually. The CT can be either on Live line or Neutral Line..

...y and preset power alarm limit. Short press the key to turn on or off the backlight. The backlight has memory function, it can store the on or off state when power off..
LCD DIGITAL DISPLAY: Large-screen LCD with all sight 180° view. The blue backlight can be turned on/off manually. This AC meter is used for single-phase power with one hot line and one neutral line. If you want to measure the circuit with 2 hot lines, you will need 2 meters, one for each line..

Function: Three-phase monitoring of phase sequence, phase loss..
Application: This monitoring relay is suitable for pumps, fans, blowers, motor elevators, cranes, central air conditioners, etc..
Construction and installation: This phase sequence relay uses standard modular construction and rail-mounted mounting..
Power supply mode: Powered by the measurement circuit, no additional auxiliary power supply is required..
Accessories: With 2 indicators to indicate various working conditions, the two groups usually open/close contacts..

Dynamic phase loss, static phase loss protection: refers to the phase failure of any phase when the protected device is in the running state or non-operating state. The indicator light is in the form of red light and priority.
Wrong phase protection: A protection measure to prevent the phase sequence of L1, L2, L3 three-phase AC power supply from being connected incorrectly. Instant action. The indicator light is in the form of yellow light..
Voltage Unbalance Protection: Refers to a voltage imbalance that will affect the safe operation of the device. When the voltage imbalance rate is higher than 8%. The form of the indicator light is: the lack of phase red light is on, and priority..
Delay protection: When there is a fault, the monitor will delay after 1~2 seconds, and the relay will release..
The protection function of the monitor is not affected by the current of the line or load, the inrush current, the unbalanced current and the nature of the load. Long-term work with full performance and full climate. Power consumption is no more than 2W..

Dynamic phase loss, static phase loss protection: refers to the phase failure of any phase when the protected device is in the running state or non-operating state. The indicator light is in the form of red light and priority.
Wrong phase protection: A protection measure to prevent the phase sequence of L1, L2, L3 three-phase AC power supply from being connected incorrectly. Instant action. The indicator light is in the form of yellow light..
Voltage Unbalance Protection: Refers to a voltage imbalance that will affect the safe operation of the device. When the voltage imbalance rate is higher than 8%. The form of the indicator light is: the lack of phase red light is on, and priority..
Delay protection: When there is a fault, the monitor will delay after 1~2 seconds, and the relay will release..
The protection function of the monitor is not affected by the current of the line or load, the inrush current, the unbalanced current and the nature of the load. Long-term work with full performance and full climate. Power consumption is no more than 2W..

Universal Smart Meter – Works on any electrical system up to 480V.
Submeter Any Electrical Load and Read the Results Over the Web.
120 to 480 volts — 100 to 5,000 amps — 50 or 60Hz.
1-phase or 3-phase — Accurate to 0.5% — Wide Selection of CTs.
The Best Communicating Smart Meter for the Lowest Price — CTs NOT Included in Price.