ReviewsThree Phase Voltage Stabilizer

TG30S Mini AC 220-440V Voltage Monitoring Relay Phase Sequence Protection Protection 3-Phase Phase Sequence Relay for Industry Applications

Dynamic phase loss, static phase loss protection: refers to the phase failure of any phase when the protected device is in the running state or non-operating state. The indicator light is in the form of red light and priority.
Wrong phase protection: A protection measure to prevent the phase sequence of L1, L2, L3 three-phase AC power supply from being connected incorrectly. Instant action. The indicator light is in the form of yellow light..
Voltage Unbalance Protection: Refers to a voltage imbalance that will affect the safe operation of the device. When the voltage imbalance rate is higher than 8%. The form of the indicator light is: the lack of phase red light is on, and priority..
Delay protection: When there is a fault, the monitor will delay after 1~2 seconds, and the relay will release..
The protection function of the monitor is not affected by the current of the line or load, the inrush current, the unbalanced current and the nature of the load. Long-term work with full performance and full climate. Power consumption is no more than 2W..

Check Stock

RioRand 400W 6-60V PWM DC Brushless Electric Motor Speed Controller with Hall

1.Humanized design,the interface adopts binding posts,standard heat sink,integrated speed regulating potentiometer on the board,it can be used when the power is on,save time and effort..
2.Full patch technology,stable performance,with forward and reverse, brake function.Electric Motor Speed Controller Brushless Controller with Hall..
3.Wide voltage 6-60V high power 400W DC three-phase brushless with Hall controller..
4.High-power 400W DC three-phase brushless with Hall controller, support PLC 0-5V analog control, support PWM control, amplitude 2.5-5V.
5.There are three relatively thick phase wires on the motor, and there are also three phase wire interfaces on the driver board. They are marked with the characters of MA, MB, MC and other similar characters, and they are also connected respectively..

Check Stock

Mini AC 220-440V TG30S Phase Sequence Protection Voltage Monitoring Relay Voltage Phase Protective Relay Building Electronics Projects for Industry Applications

Dynamic phase loss, static phase loss protection: refers to the phase failure of any phase when the protected device is in the running state or non-operating state. The indicator light is in the form of red light and priority.
Wrong phase protection: A protection measure to prevent the phase sequence of L1, L2, L3 three-phase AC power supply from being connected incorrectly. Instant action. The indicator light is in the form of yellow light..
Voltage Unbalance Protection: Refers to a voltage imbalance that will affect the safe operation of the device. When the voltage imbalance rate is higher than 8%. The form of the indicator light is: the lack of phase red light is on, and priority..
Delay protection: When there is a fault, the monitor will delay after 1~2 seconds, and the relay will release..
The protection function of the monitor is not affected by the current of the line or load, the inrush current, the unbalanced current and the nature of the load. Long-term work with full performance and full climate. Power consumption is no more than 2W..

Check Stock

Nema34 8N.m Closed Loop Stepper Servo Motor 116mm 6A 2 Phase+HSS86 Hybrid Servo Motor Driver Controller 70V/AC 100V/DC CNC Kit for CNC Router Engraving Milling Machine

ATO 2 hp (1.5 kW) VFD, single phase 110V/120V input, 1 phase or 3 phase 220v-240v output, designed for driving single/three phase AC motor via 120v power supply.
【Voltage&Frequency】Input voltage: 1 phase 120V AC ±15%.
Output voltage: 1 phase or 3 phase 220V AC ±15%.
【APPLICATION】 ATO 110V VFD Can be widely applied to drive the AC motor, such as fans, pumps, power tools, etc..
【TIPS】 Choose a VFD base on motor rated current: VFD output current ≥ motor rated current.
【CUSTOMER FIRST】 If you have no experience in driving a VFD, be sure to refer to the instructions before operating a VFD.If you are not sure about the size or have any issue about the product or service, please don't hesitate to email us. We will answer you within 12h.

Check Stock

ATO 1 hp VFD, 4A 0.75kW 120V Input 220V Output, Single Phase to 1phase/3phase Variable Frequency Drive, for AC Motor Speed Control

ATO 1 hp 110v VFD, 0.75 kW single phase 110v/120v input, single phase or three phase 220v output variable frequency drive. Running your 1 phase/3 phase motors on 120 volt supply via ATO VFD.
Input voltage: 1 phase 120V AC ±15%, Input frequency: 50Hz/60Hz, Output voltage: 1 phase or 3 phase 220V AC ±15%, Output frequency: 0.00~400.00Hz.
【APPLICATION】: ATO 110V Variable frequency drive can be widely applied to drive the AC motor, such as fans, pumps, power tools, etc..
【TIPS】: Choose a VFD base on motor rated current: VFD output current ≥ motor rated current.
【CUSTOMER FIRST】If you are not sure about the size or have any issue about the product or service, please don't hesitate to email us. We will answer you within 12h.

Check Stock

DGU Series Lighting Control with Photo/Override Input Control Time Switch, Metal Indoor NEMA 1 Enclosure, 120-277 VAC 50/60 Hz Input Supply, SPDT Momentary Output Contact

Instrument base plate is provided with magnet, instrument can adsorbed on the metal shell when testing, the operation more convenient..
The dynamic sound and light indicates the positive or negative phase of the phase sequence of the three-phase power supply, which is clear at a glance..
More sensitive ETCR1000C clamp, can even sense the AC voltage signal as low as a few Volts, with a wider range of live electricity..
It has a better power-saving performance with the maximum rated power of 300mVA..
The three clamps of ETCR1000C are in three colors, it is more in line with the distinction of three-phase line, and more scientific and artistic overall appearance..

Check Stock

Poly Nail Gel Kit with 6W LED Nail Light MYSWEETY 8PCS Nail Extention Gel Nail Enhancement Builder Nail Gel Professional Nail Gel Kit with Top & Base Coat + Slip Solution + Painting Gel + Painting Brushes

This is single phase VFD with 1 phase INPUT and 3 phase OUTPUT,the power is 2.2KW, 220V,10A, VFD Dimension: 130 x 103 x 200 mm (L x W x H).....
Application: Spindle Motor, Drill Press, CNC, HVAC, Lathe, Milling, Pumps, Conveyors, Mach3, Fan, Cooling, Compressor, Three-phase motor and other....
Due to the VFD product is a flexibly configurable device , you are welcomed to consult with our CS make best choice for your exact application..
Simple to operate and wire, convenient for you to use. Warranty: 1 Year replace or refund!.

Check Stock

Norstar Power Converter with Voltage Stabilizer (1500 Watts) - Step Up & Step Down Voltage Transformer - Automatic Voltage Regulator with Stabilizer (1500 Watts)

This is a Dual Voltage Power Converter with a Stabilizer built-in. It can converter US 110/120 Voltage to Foreign 220/240 Voltage and vice versa..
It is also known as a Step Up and Step Down Voltage Transformer, and also as an Automatic Voltage Regulator with Stabilization..
This is the only Converter that has a Digital Display Meter, so the Voltage Status is incredibly easy to read. This makes it more accurate and user-friendly than any other Converter or Transformer on the market..
The larger models (5000+) come with Circuit Breakers built-in for both Input and Output Voltage along with Dual Switches, which ensure double protection against overloads..
This unit has a built-in Next Generation CPU which ensures consistency and stability every time. Great for Electronics, Countertop Home Appliances, Refrigerators, Large Home Appliances, and more! It is Single Phase with the Input/Output Frequency being 50Hz..

Check Stock

Dataq Instruments DI-2008 Unlocked 8 Channel Voltage and Thermocouple Data Acquisition Kit Measures ±10 mV to ±50 V and Thermocouple temperatures with Support for TC Types J, K, T, B, R, S, E, and N

External current probe and voltage measurements.
Over/under alarms for current and voltage visual alarm indication.
Simultaneous single phase current and voltage monitoring verification of power conditions, compressor and fan run cycles and use three LCV's for three phase applications.
Single point offset calibration available through software.

Check Stock

Legrand/On-Q AC101001 1-Gang Low Voltage Bracket, Retrofit , Green

VOLTAGE BRACKET: 1 Gang Low voltage bracket has convenient metallic swing brackets, clamp brackets in place.
EASE OF ALIGNMENT: In voltage brackets, the rigid plastic retains shape for ease of alignment during installation and the reliable side stabilizer tabs keep it aligned with the stud.
AVAILABLE SIZE AND COLOR: The low voltage bracket is available in a different size – Three Gang (2-Pack), Single Gang, Three Gang, Two Gang. Its dimension is 10 x 10 x 8 inches. The Green color easily distinguishes opening for low voltage products.
BEST SELLER VOLTAGE BRACKETS: 1 Gang Voltage bracket is the Amazon’s Best Choice and the spacious opening accommodates large devices and facilitates wiring process.
CERTIFIED: The On Q 1 Gang low voltage bracket certified with UL standard.

Check Stock

600W 48V Three-Phase Wind Turbine Generator Permanent Magnet Generator Alternator 600RPM 50Hz Wind Power Turbine Generator for Wind Solar Hybrid System

【High Efficiency & Stability】: Our 48V three-phase alternator permanent magnet generator has great features of high efficiency and stable performance, and the rated speed of this wind power turbine generator is 600rpm.
【Energy saving】: This three-phase 600W wind power turbine generator is a permanent magnet generator, and our 50Hz three-phase alternator generator owns high reliability, which is more energy-saving for users.
【Wide Temperature Adaption】: Our 600rpm permanent magnet generator possesses high and low temperature resisting, and the wide range of working temperature adaption is from -40℃~80℃, so users can rest assured to use.
【Convenient & Simple Operation】: This three-phase alternator generator is very convenient to use and easy to install, which is perfect for industry use. So this permanent magnet generator is an ideal choice for users.
【Specifications】: Material: Ceramic + Metal Rated Power: 600W Rated Voltage: 48V Rated Speed: 600rpm Rated Frequency: 50Hz Lubrication Method: Filling Grease Working Temperature: -40℃~80℃ Weight: Approx. 7700g.

Check Stock