ReviewsThree jaw Chucks

DURATECH 4-Piece 3-Jaw Gear Puller, 3', 4', 6', 8', Removal Tool for Gears, Pulleys, Bearings and Flywheels, Fully Assembled, CRV

Drop-forged Cr-V steel jaws are heat-treated for extra strength and durability. This 3-jaw removal tool works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more..
Three jaws come with fine chrome plating to provide a reliable and effective rust and corrosion protection. Drive screw is covered by black phosphatizing, which provides maximum strength and longevity to the gear puller, puller jaws allow for easy gripping and access to tight spaces. No need to assemble yourself is the advantage of DURATECH..
Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside. Universal 4 or 8 position reversible jaws offer inside or outside grip with short, standard, long or extra-long reach..
Three-jaw design balances the pulling force well, and claws are precisely machined to give a non-slip and secure grip on the gears. Make it deal for pulling work in confined areas. Achieve more with its adjustable and reversible jaws..
Use the DURATECH 3, 4, 6, and 8-Inch Gear Puller 3 Jaw Flywheel Puller Set to remove most shift-fitted parts with ease. Perfect for you to smoothly and safely slide gear, pulley, bearing, and flywheel off the shaf....

Check Stock

Bonvoisin 5T Hydraulic Gear Puller Set Wheel Bearing Puller Kit 2 or 3 Jaws Pulling Separator for Wheel Hubs Rotors Car Axles Pulleys Brake Drums

Drop-forged Cr-V steel jaws are heat-treated for extra strength and durability. This 3-jaw removal tool works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more..
Three jaws come with fine chrome plating to provide a reliable and effective rust and corrosion protection. Drive screw is covered by black phosphatizing, which provides maximum strength and longevity to the gear puller, puller jaws allow for easy gripping and access to tight spaces. No need to assemble yourself is the advantage of DURATECH..
Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside. Universal 8 position reversible jaws offer inside or outside grip with short, standard, long or extra-long reach..
Three-jaw design balances the pulling force well, and claws are precisely machined to give a non-slip and secure grip on the gears. Make it deal for pulling work in confined areas..
Jaw Spread: 8in, Jaw Reach: 9-1/16in, Puller: 12T. Perfect for you to smoothly and safely slide gear, pulley, bearing, and flywheel off the shaft. Free replacement insures your DURATECH Wrenches purchase against manufacturer defects..

Check Stock

Universal Adjustable Double-ended Wrench, Multifunctional Bathroom Wrench, Crescent Wrench for Disassembly & Assembly Sets, Hand Tool for Water Pipe Repair & Home Accessories

【Multifunctional Double-head Wrench】Our universal double-ended wrench set can solve 99% disassembly & assembly of sanitary ware problems. It's not just a bathroom wrench, It's a sink wrench! Suitable for operating quickly and easily in narrow spaces and small space..
【Large Opening Design】One hand operation, extra large opening up to 80mm, meets various nut sizes. suitable for faucets, valves, connecting pipes, under-sink, showerheads, etc..
【Ergonomic Design】The short handle design makes you comfortable when you using it, the end of the handle increases the card slot design function, the handle has the perfect sized grip to keep your hand on tightly without slipping..
【3 in 1 Crescent Wrench】The adjustable wrench includes 3.5cm six-sided chucks , 4.5cm six-sided chucks and multifunctional round chucks. These three specifications card head fit 99% different size types of sink pipe fittings..
【Convenient Storage】We provide a storage box with the wrench kit, convenient for next use and space saving..

Check Stock

Wire Crimping Tool, Preciva Ratcheting Wire Crimper Tool Crimping Pliers for AWG20-10 Wire, Suitable for Insulated Electrical Wire Connectors

[Color Coded Crimping Jaws]: This Preciva insulated crimping tool comes with three different crimping jaws. Three colors marked. Red, Yellow and Blue, which are coresponding with the connectors. Red crimping jaws for the Red connectors, Bule jaws for the blue connector and Yellow jaws for the yellow connectors..
[Crimping Range AWG20-10/0.5-6mm²]: The crimper tool is suitable for AWG 20-10 wires, and the crimping area range is 0.5-6mm². Multiple applications for your daily use. RED jaw for (0.5-1.5mm² /AWG 20-16), BLUE jaw for (1.5-2.5mm² /AWG 16-14), YELLOW jaw for (4-6mm² /AWG 12-10)..
[Ratcheting Mechanism Design]: This crimper plier Comes with a ratcheting mechanism design for this Insulated terminals crimping tool, labour- saving design. One-hand operation could make a perfect crimp. And you can take less strength..
[Ergonomic Handle Design]: This wire crimping tool equipped with an ergonomic handle, easy to grip and operate. More comfortale to use. Eliminating hand fatigue..
[Widely Applications]: This crimping plier tool are widely used in various household electrical c....

Check Stock

Posi Lock 106 Manual Puller, 3 Jaws, 10 tons Capacity, 6\ Reach, 1/4\ - 7\ Spread Range, 13-1/3\ Overall Length

Manual puller with three jaws for extraction of most shaft-fitted parts, including bearings, wheels, bushings, gears, and pulleys.
Three-jaw construction ensures equal load distribution, secure hold, and concentric pulling action.
Forged steel jaws for increased strength over investment casting.
10-ton pulling capacity, 6" (152mm) reach and a spread range of 0.5 to 7 inches (13 to 178 mm) for increased pulling leverage.
Tapered jaws for better access in tight spaces.

Check Stock

DEWALT Masonry Drill Bit Set, Percussion, 4-Piece (DW5204)

2 cutter carbide tip of masonry drill bit set maximizes carbide surface contact for longer bit life..
Four flute design cleans debris out for fast, efficient drilling.
Three flats on shank eliminate bit slipping in chuck (except DW5232, DW5233, DW5237, DW5238).
Rock carbide tip maximizes carbide surface contact for longer bit life.
Three flats on shank eliminate bit slipping in chuck.
Innovative tip reduces walking and increases accuracy.
Used primarily to drill holes for mechanical anchors, fits standard 3/8-inch and 1/2-inch chucks.

Check Stock

2-Pack Keyless Chuck, 1/32' to 1/8' Replacement 4486 Drill Keyless Bit Chuck Shank Rotary Tool Quick Change Adapter Kit Compatible for Dremel 4486 Model 395 3000 4000 4300 8220 3000 7300 Multipro

Quick change keyless chucks holds various accessories with 1/32” to 1/8” shank sizes. Pay attention to measure the contrast size before buying. Multipro drill adapter compatible for Dremel 4000, 400, 3000, 300, 395, 398, 8220, 8200, 8100, 800....
3-jaw chuck compatible for all Dremel cordless and corded rotary tools(including drill bits, sanding drums, polishing wheels and other light-duty accessories）.
One-piece structure design, alloy material, sturdy and durable, more safer than plastic models. The 3-jaw chuck is well-made, and the built-in spring is stable and durable..
This replacement keyless chuck provides a big improvement in precision and holds these tiny bits far more securely and in better alignment with the rotation of the tool, under high-speed rotation, it not only maintains stability but also improves work efficiency..
Package content: 2 x multipro shank rotary tool accessories keyless chuck..
How long is the warranty/renew? We offer a hassle-free 12-month warranty and 24-hour friendly customer service. If there is any dissatisfaction with the product, or the parts are missing, please contact us at any time, whether it is a new one or a refund, we will definitely give you a satisfactory answer. Be responsible for your choice, let you ....

Check Stock

LIUYE Triple Electrode A7TC Spark Plug for GY6 50 cc 70cc 90 cc 110cc 125 cc 150cc ATV Dirt Bikes Scooters and Kazuma Roketa Sunl Taotao Baja Redcat Jonway

Three-stage ignition makes the fuel in the engine fully burn, reduces coke deposition and improves engine power. The common spark plug uses single-jaw ignition, the three-jaw spark plug uses three-jaw ignition, and the ignition is fast and without delay, making your vehicle powerful..
A7TC spark plug has super ignition performance, high temperature resistance and corrosion resistance, which greatly improves engine performance..
Specification: Thread Diameter: 10mm. Thread Length:12.7mm.
Brand new 3 Electrode Spark Plug Fit For dirtbikes ATVs Cubs Honda CRF50 DAX and so on.for Transmission:All Chinese Made 50cc 139QMB, 125 150cc 154QMI 157QMJ.
Package Include:2 pieces Three Electrode Head Spark Plug.

Check Stock

4-Jaw Self-Centering Chuck Set, Z011 Four Jaw Mini Lathe Chucks w/ Connecting Rod & Wrench, Mini Power Lathe Machine Replacement Parts Accessories (Type C)

【3 Jaw or 4 Jaw Self-Centering Chuck Set for Mini Lathe】- Type B comes with 1 x Connecting Rod + 1 x Three Jaw Chuck + 2 pcs x Short Sticks.
Type C - 1 x Connecting Rod + 1 x Four Jaw Chuck + 1 x Wrench. This chuck connecting rod is suitable for Z011 Three Jaw or Four Jaw Woodworking Mini Lathe Chuck..
【Mini Lathe Chuck & Connecting Rod Replacement】- You can use it to replace the old or brocken one. The clamping range of this chuck is between 1.8-56mm, which is suitable for clamping a variety of industrial parts..
【Compact Size, Easy to Use】- Mini Lathe Chuck diameter about 48mm, Outer diameter about 12 mm-65 mm, Inner diameter about 1,8mm-56mm.
2. Connecting Rod size about 5.2cm x 6mm/2.05x0.24inch (LxD), Connecting Thread about M12x1mm. Perfect for mini metal and wood lathes..
【Stainless Steel Chuck Connecting Rod】- The Connecting Rod is made of High carbon steel material, anticorrosion, not easy to rust, durable and sturdy, ensure it has high hardness and can be reused..
【Practical Power Lathe Accessories】- Our chuck connecting rod is stable and has great performance while using, it is the ideal choose for you. High accurate connecting rod so that they can better fit with the Mini Lathe Machine Parts..

Check Stock

IRWIN Drill Bit Set Cobalt 15-Piece 316015

Visible clear lid of the drill bit set are desgined for easy viewing of contents.
Stackable - for convenient travel and storage.
Three-flatted shank design ideal for keyless chucks.

Check Stock

Greenlee GSBSET3 Step Bit Set (#1, 4, 9)

Durable split-point tip for fast, accurate material penetration..
Patented split-step design optimizes chip load for fast, smooth cutting, and more holes per charge..
Progressive cutting edges provide balanced aggression to maximize torque efficiency and minimize stalling..
Improved double flute design for superior chip evacuation, cutting speeds and tool life..
Three-flat shank for all 1/2” drill chucks..

Check Stock