ReviewsThree phase Energy Meter

Victron BMV-712 Battery Monitor (BLACK) with Battery Temperature Sensor kit

Victron Energy Quattro 48-Volt 5000VA 70 amp is a combined 120V inverter and battery charger, additionally it can be connected to two independent AC sources.
In the event of grid failure, Victron Energy Quattro takes over the supply to the connected loads. This happens so fast that computers and other electronic equipment will continue to operate.
With the unique Power Assist feature Victron Energy Quattro will prevent overload of a limited AC source, such as a generator or shore power connection.
Up to 6 Victron Energy Quattros can operate in parallel to achieve virtually unlimited power, three phase or split phase operations are also possible.
When coupled with a Victron Energy GX device (Sold separately) you can monitor and control your Victron Energy Quattro and system remotely via the internet from anywhere in the world.

Utilizes revenue-grade 0.3% accuracy class 0.1A secondary solid core current transformers (CTs) that conform to all applicable ANSI requirements.
Up to three sets of CTs per phase can be paralleled per meter without the need for a meter multiplier.

The meter can only measure the active power(real power). It doesn’t show Apparent power. If you measure power from a DC-AC inverter please make sure it’s PURE SINE WAVE. Otherwise the meter can be burnt or melted.
Voltage test range: One-Phase 80~260V AC Power, 50/60HZ.
Store energy data when power off(can be reset)..
Large-screen LCD (display voltage, current, active power, energy at the same time)..
The blue backlight can be turned on/off manually. The CT can be either on Live line or Neutral Line..

Victron Energy Quattro 48-Volt 5000VA 70 amp is a combined 120V inverter and battery charger, additionally it can be connected to two independent AC sources.
In the event of grid failure, Victron Energy Quattro takes over the supply to the connected loads. This happens so fast that computers and other electronic equipment will continue to operate.
With the unique Power Assist feature Victron Energy Quattro will prevent overload of a limited AC source, such as a generator or shore power connection.
Up to 6 Victron Energy Quattros can operate in parallel to achieve virtually unlimited power, three phase or split phase operations are also possible.
When coupled with a Victron Energy GX device (Sold separately) you can monitor and control your Victron Energy Quattro and system remotely via the internet from anywhere in the world.

Victron Energy Quattro 24-Volt 5000VA 120 amp is a combined 120V inverter and battery charger, additionally it can be connected to two independent AC sources.
In the event of grid failure, Victron Energy Quattro takes over the supply to the connected loads. This happens so fast that computers and other electronic equipment will continue to operate.
With the unique Power Assist feature Victron Energy Quattro will prevent overload of a limited AC source, such as a generator or shore power connection.
Up to 6 Victron Energy Quattros can operate in parallel to achieve virtually unlimited power, three phase or split phase operations are also possible.
When coupled with a Victron Energy GX device (Sold separately) you can monitor and control your Victron Energy Quattro and system remotely via the internet from anywhere in the world.

MULTIFUNCTIONAL DIGITAL MULTIMETER: With a large-screen LCD display interface, it can display six parameters at the same time, including Voltage Current Active Power Energy Frequency and Power factor at the same time. Measuring Voltage range AC 80V-260V.
Power Factor range 0-1PF. It will be more convenient to install with a split current transformer..
OVERLOAD ALARM FUNCTION: Backlight and power will flash simultaneously to give an alarm if active power value exceeds the preset value. Alarm value can be set by yourself, but applied load should not exceed the rated power. This AC digital meter is suitable for indoor, please do not use outdoor..
POWER-OFF DATA STORAGE FUNCTION: The last test data is stored automatically when the power supply abruptly lose. No More worry about data loss due to sudden power outages. This digital meter can only measure the Active Power but not Apparent Power. If you measure power from a DC-AC inverter, please make sure it’s PURE SINE WAVE, or the meter can be burnt or melted..
ONE-BUTTON CONTROL: The button can be used to control the backlight, reset energy and preset power alarm limit. Short press the key to turn on or off the backli....

Universal Smart Meter – Works on any electrical system up to 480V.
Submeter Any Electrical Load and Read the Results Over the Web.
120 to 480 volts — 100 to 5,000 amps — 50 or 60Hz.
1-phase or 3-phase — Accurate to 0.5% — Wide Selection of CTs.
The Best Communicating Smart Meter for the Lowest Price — CTs NOT Included in Price.

Certified to all applicable standards of ANSI C12.1.
Equipped with both Isolated Pulse Output and RS-485 Serial Port (Modbus Native) standard for easy interface with most AMR and BAS systems.
Utilizes revenue grade 0.3 accuracy class 0.1A secondary solid core current transformers (CTs) that conform to all applicable ANSI requirements or 1-Percent accuracy split-core CTs.
Up to three sets of CTs per phase can be paralleled per meter.

Lifetime Customer Service by Presonus product Experts. Guaranteed legitimate and authentic merchandise. Class A vacuum tube microphone / instrument preamplifier. Tube gain and tube drive.
Variable VCA compressor (threshold, ratio, attack, release, make up gain, auto, soft). Three-band parametric EQ. Precision analog VU meter for gain reduction and output. EQ Pre/Post compressor switch.
80Hz high pass filter. 20dB pad. Phase invert. Rugged metal chassis. High headroom. Ultra low noise design.

Certified to all applicable standards of ANSI C12.1.
Equipped with both Isolated Pulse Output and RS-485 Serial Port (Modbus Native) standard for easy interface with most AMR and BAS systems.
Utilizes revenue grade 0.3 accuracy class 0.1A secondary solid core current transformers (CTs) that conform to all applicable ANSI requirements or 1-Percent accuracy split-core CTs.
Up to three sets of CTs per phase can be paralleled per meter.

Performance: Max Flow: 155 CFM Max Pressure: 166 "H20 Max Vacuum: 161 "H20.
Specifications: Inlet/Outlet Diameter: 2.00" Voltage/Phase: 220-275/380-480 Three Phase Horsepower: 5.00 Decibels: 74.
Direct Drive TEFC - Premium Efficiency, Inverter/Continuous Duty Motor - Anti-Sparking, Corrosion Resistant Aluminum Housing.
Extremely low maintenance - Bearing replacement every 40,000 hours of use @ 68?F with no need to relubricate - that’s it!.
Regenerative Blowers are far more energy efficient than Air Compressors making them an excellent alternative that could save you thousands on your electricity bill..