ReviewsThrillers With Strong Female Leads

AUTO METER 5323 Accessories OBD-II Accessory

Connects to existing vehicle OBD-II port providing to remote mount connections to mount additional devices..
10 inch straight through leads with strain reliefs between 16 pin Male and 16 Female connectors compatible with J1962 OBD-II standards.
Device and vehicle compatibility may vary..

Size: 5 different lengths of 10 cm/ 3.95 inch, 15 cm/ 5.9 inch, 30 cm/ 11.8 inch, 50 cm/ 19.7 inch and 60 cm/ 23.6 inch, each length has 6 pieces servo extension cords.
Quantity: this package includes 30 pieces of female to male servo extension cable, enough for you to use, different length can meet your different needs.
Good connector: the connector of these wires are Futaba style connector with 3 pins, and it has an angle, in case you will install incorrectly, very convenient.
Feature: Female to male servo extension cable: featured with female connector on one side and male connector on the other side, can be connected to the receiving set and steering engine.
Widely Application: these servo extension leads can be applied for Futaba and JR servo, plane and helicopter servo connection or receiver connection, remote control car, RC Car.

Standard shielded plastic female right angle plug, 48 inch wires.
Pair of 2 leads to connect a total of 4 electrodes.
Pins fit standard 2mm pigtail electrode pad connectors.
Compatible with most standard TENS & EMS units including SPORT PLUS EMS/TENS Combo Unit, ZZAN602 TENS, TENS 7000, Twin Stim iii EMS.
NOT compatible with Empi or Prospera or SUPPENDON devices.

White Rodgers Hot Surface Furnace Igniter stock number 767A-380..
This igniter replaces Robertshaw number 41-604, Norton number 601, 601XBM and OE number 44744-2..

Never go beyond its capabilities. Try to stay 10 to 15% below what the rate is for.
12-volt 5-prong relay. Excellent water-repellent and dustproof ability, but not using it in water.
Be careful when plugging the relay into the socket. If you push hard, you will bend the female connector.
Primary leads use 12 a.w.g tinned copper wire. Coil leads use 16 a.w.g.
SPDT relay: it has both normally open and normally closed terminals, terminal 87A is powered when the relay is inactive and switches the power to terminal 87 when the relay is activated.

1 pcs of male boat side socket + 1 pcs of female boat side socket boat side connector.

Servo extension cord sizes: have 5 different lengths of 10 cm/ 3.94 inch, 15 cm/ 5.9 inch, 30 cm/ 11.8 inch, 50 cm/ 19.7 inch and 60 cm/ 23.6 inch, each length has 4 pieces servo extension cords.
Application: these servo extension leads are compatible with Futaba and JR servo, plane and helicopter servo connection or receiver connection, remote control car, RC Car.
3-Pin servo extension wire: each servo extension has 3 pieces of 0.08TS wires, universal model.
Connectors with 3 pins and have an angle in case you will install incorrectly, convenient for use.
Female to male servo extension cable: featured with female connector on one side and male connector on the other side, can be connected to the receiving set and steering engine.
Package includes: 20 pieces of female to male servo extension cable wires with 5 different lengths, enough for you to use on different occasions.

Standard shielded plastic female right angle plug, 48 inch wires.
Pair of 2 leads to connect a total of 4 electrodes.
Pins fit standard 2mm pigtail electrode pad connectors.
Compatible with most standard TENS & EMS units including SPORT PLUS EMS/TENS Combo Unit, ZZAN602 TENS, TENS 7000, Twin Stim iii EMS.
NOT compatible with Empi or Prospera or SUPPENDON devices.

Die cast aluminum housing is powder-coated for durability.
Threaded globe with gasket protects against weather, garden sprinklers, and insects.
Socket with all copper electrical parts and 20" leads.

6-pin I/O power cable for Allied Vision Mako USB3, Point Grey Blackfly, Basler ace GigE, racer GigE, AVT, Baumer, Sony, Dalsa, JAI, Imaging source, CCD cameras.
Connector female 6-pin compatible for Hirose HR10A-7P-6S.
The cable has 6-pin female connector on one end, and 6-core bare wire (also called pigtail open leads) on the other. The cable has a label with pin-to-wire color assignment.
Length available 1 meter, 2 m, 3 m, 5 m, 10 m, other lengths please message me.
High flex, braided shielded, PVC jacket cable. For assembly of power and/or I/O cables.

Multimeter test leads are made of high quality soft premium silicone insulating material which are flexible and durable. Silicone helps prolong life and can be used in extreme environments. Strong conductivity, low resistance and no signal loss. Leads: CAT III 1000V,10A..
The head of the multimeter pen is a combination of banana plug and probe. It can be connected to any other accessory with a 4mm socket in this kit. Flexible collocation and easy to use..
The combination of various puncture probes can meet your needs in different test scenarios. Alligator clips and test tweezer add to the versatility of the kit. All accessories are ergonomically designed with non-slip design. Greatly improve your comfort of use..
25PCS silicone multimeter test leads kit works perfectly with any multimeter and test instrument. Widely used in different measurement environments such as industrial, electronics, home and automotive..
Package include: 2PCS banana plug multimeter leads, 2PCS banana plug to test hook test leads, 2PCS multimeter pens, 12PCS wire piercing probes set, 2PCS high voltage test hook clips, 4PCS alligator clips set, 1PC test tweezer, 1PC transparent storage box..