ReviewsThrough Drive Shaft

Martin SF 11/16 Quick Disconnect Bushing, Class 30 Gray Cast Iron, Inch, 0.68\ Bore, 3.125\ OD, 2.06\ Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Class 30 gray cast iron for resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock

Martin SD 15/16 Quick Disconnect Bushing, Class 30 Gray Cast Iron, Inch, 0.93\ Bore, 2.187\ OD, 1.81\ Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Class 30 gray cast iron for resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock

Martin J 100MM Quick Disconnect Bushing, Ductile Iron, Metric, 100 mm Bore, 130.75 mm OD, 114.3 mm Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Ductile iron for greater strength than gray cast iron and resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock

Martin SK 1 15/16 Quick Disconnect Bushing, Class 30 Gray Cast Iron, Inch, 1.94\ Bore, 2.812\ OD, 1.93\ Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Class 30 gray cast iron for resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock

Martin SDS 1 5/16 Quick Disconnect Bushing, Class 30 Gray Cast Iron, Inch, 1.31\ Bore, 2.187\ OD, 1.37\ Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Class 30 gray cast iron for resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock

Martin SK 24MM Quick Disconnect Bushing, Ductile Iron, Metric, 24 mm Bore, 71.42 mm OD, 49.21 mm Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Ductile iron for greater strength than gray cast iron and resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock

ECCPP Complete Rear Drive Shaft Prop Shaft Assembly Fit for Porsche Cayenne 2003-2010 for VW Touareg 2004-2008

  • COMPATIBLE VEHICLES - Compatible for Porsche Cayenne 2003 2004 2005 2006 2008 2009 2010, Compatible for Volkswagen Touareg 2004 2005 2006 2007 2008 2009 2010. Please enter your Year / Make / Model information in the query tool at the top left to confirm your fitment.
  • COMPREHENSIVE TEST - The drive shaft is a rotating body with high speed and few supports. So we have balanced and tested the drive shaft. In addition, we will carry out strict tests on the specification of the drive shaft and the power transfer efficiency of the universal joint, to ensure that the drive shaft meets optimum performance and specifications.
  • WHY REPLACe - When your drive shaft fails, the car would start with a clucking sound, and the chassis would always produce abnormal noise and the car body would produce obvious vibration during driving. This is usually due to wear and tear of the drive shaft and its parts, deformation and loss of dynamic balance. It will make your car less powerful and use more energy, and make your driving experience worse. So it is necessary to inspect and replace timely.
  • DIRECT REPLACEMENT - OE standard specification, lubricated has been carried out. You will get 1 drive shaft with center support bearing and 1 bearing support fR-ame with 2 bolts. Pl....
Check Stock

RC Car Drive Shaft, 2 Set Metal Transmission Drive Shaft Upgrade Parts Compatible with Axial SCX10 D90 1/10 Model Car(Silver Red)

  • Fine WorkmanshipThe RC drive shaft has fine workmanship make sure the longevity of the product.112mm to 150mm adjustable length..
  • Increase Control PerformanceThe RC drive shaft can enhances the control performance of your car, reliable and durable to use..
  • Compatible withThe RC drive shaft is suitable for Axial SCX10 D90 1/10 RC car model..
  • Improve PerformanceThe RC drive shaft can improving comprehensive performance for your RC model cars, which is making it more attractive..
  • Wonderful AccessoryThe RC drive shaft is high precision, which is wonderful accessory for the old or broken one, directly fitment..
Check Stock

TB Woods Type QT QT22MM Sure-Grip Bushing, 22 mm Bore, 1.625\ OD, 1.25\ Length, 1750 lbs/in Torque, Standard Design, Standard Keyway

  • Quick disconnect bushing with a torque capacity of 1,750 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Steel for greater strength and shock resistance than cast iron.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with quick disconnect bushings from various manufacturers.
Check Stock

TB Woods Type QT QT14MM Sure-Grip Bushing, 14 mm Bore, 1.625\ OD, 1.25\ Length, 1750 lbs/in Torque, Standard Design, Standard Keyway

  • Quick disconnect bushing with a torque capacity of 1,750 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Steel for greater strength and shock resistance than cast iron.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with quick disconnect bushings from various manufacturers.
Check Stock

TB Woods Type QT QT15/16 Sure-Grip Bushing, Inch, 0.9375\ Bore, 1.625\ OD, 1.25\ Length, 1750 lbs/in Torque, Standard Design, Standard Keyway

  • Quick disconnect bushing with a torque capacity of 1,750 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Steel for greater strength and shock resistance than cast iron.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with quick disconnect bushings from various manufacturers.
Check Stock