ReviewsThrough For Metal

CKG Sand Scoop for Metal Detecting 304 Stainless Steel Shovel for Beach Underwater Treasure Hunting + Carbon Handle Pole Scoops Shovel Rod with Long Travel Handle + Free Metal Detecting Pouch - 9x6

  • ...ht: 420 gr/ 14.8 oz, Handle Diameter: 28.5 mm/1.1", Hole: 0.4"/10 mm (hexahedron), Total length - 54 inch include scoop, Hole of handle: about 1.1"/29mm, Handle Material: 3K Carbon Fiber (2mm), Combined Weight: 2.8 LB/ 1.3 Kg..
  • : Our Sand Scoop makes sifting through sand quick and easy. Whenever your metal detector buried treasure finds, simply scoop the sand in the target area, and then shake the scoop from side to side, letting the sand fall through the holes..
  • : Lightweight metal detecting has made of fine quality anti-corrosion stainless steel, wear-resistant, not easy to rust. Heavy-duty stainless steel sand scoop, perfect for sand and water metal detecting. This is a must-have for metal detecting on sandy beaches..
  • : Scoop shovel good for water and surf lines. Ground conditions: sand with silt or clay, clay and silt clogged sand with shells and stones. Has perfect washing ability. Well in using a metal detector on the clean sandy beaches that attract many vacationers..
  • : No need to use your hands to sift through sand. Our stainless steel metal detecting sand sc....
Check Stock

New Security Walk-Thru Metal Detector, Full Warranty , 6 Zone 6M

  • Professional High Sensitive Walk through Metal Detectors.
  • Infrared emission and the receiver to prevent detection blind spot.100% Ferrous & non-ferrous metal detect..
  • Counter tracks the number of patrons that have passed through the detector,.
  • LED alarm light on column, displaying the area of metal detected accurately..
  • Six interlaced detection regions of the same high with the body and combining.
Check Stock

3M Silver Cut-Off Wheel 87461 T1 4 in x .035 in x 3/8 in Pack of 25

  • GREAT PERFORMANCE AND VALUE – Designed for high-performance metal cutting while helping reduce your abrasive spend.
  • DELIVERS A FAST, CONSISTENT CUT – Ceramic 3M Precision-Shaped Grain cuts exceptionally fast, helping increase productivity.
  • LONG LASTING – Exceptional durability for extended wheel life.
  • CUTS A VARIETY OF METALS – Designed to easily cut through carbon steel, stainless steel, mild steel, aerospace alloys and more.
  • USED IN MANY INDUSTRIES – Quickly cuts through metal pipes, tubes, flat sheets and more in shipbuilding, rail, and general metal fabrication.
Check Stock

Walk-Thru Metal Detector, Full Warranty , 6 Zone 6M, Security for Schools,Office

  • Professional High Sensitive Walk through Metal Detectors.
  • Infrared emission and the receiver to prevent detection blind spot.100% Ferrous & non-ferrous metal detect..
  • Counter tracks the number of patrons that have passed through the detector,.
  • LED alarm light on column, displaying the area of metal detected accurately..
  • Six interlaced detection regions of the same high with the body and combining.
Check Stock

Luckkyme 24Pack Replacement Drawstrings Drawcords for Pants Sweatpants Hoodies Scrubs Jackets Shorts, with 3 Pieces Drawstring Threader Re-Threader Tool 53' Long(12 Color)

  • Quality Material: Made of 16 strands of terylene with metal head, drawstrings 53 Inches Long, diameter, 6mm.
  • Packing Include: 24pcs of replacement drawstrings including 12 kinds of color, 2 pieces per color, 3 pieces different drawstring threader.
  • Comes with: 3 different size drawstring threader, include 1 piece 23" flexible nylon needle, 1 piece 3.2" metal threader and 1 piece 2.6" metal tweezer, suitable for different use.
  • Easy to Use: This drawstring threader can help you save a lot of time and trouble when drawstrings replacement, re-thread your drawstring. You just need thread drawstring through either eye or weave through both eyes to hold tightly, and then insert blunt end of threader into casing, pull threader through casing until drawstring is completely threaded in casing.
  • Wide Applications: Use this trim for adding an additional fashion or replacement drawstring cord for your pants, sweatpants, shorts, hoodies, scrubs jacket,s swim trunks, shoe laces, tote bag.
Check Stock

LETRA Mini Benchtop Metal Lathe with Metal Gears | 8\x16\ Wood & Metal Working Tool | 1100W

  • PRECISE ENGINEERING: Ideal for professionals, this mini metal lathe's high-precision 4.9-inch 3-jaw chuck handles both square and round objects with equal aplomb.
  • its granular precision is especially useful for jobs requiring high accuracy such as threading.
  • A MINI YET MIGHTY LATHE: Only 32x13 inches, this mini metal lathe still cranks out 1100W and is great for handling small to medium projects.
  • COMPLETE CONTROL: The lathe's rotational speed can be set from 0 to 2250 rpm and is monitored through a digital display.
  • the well-crafted head and tailstocks, large through-hole, and 4-way tool post also contribute to providing greater control of your work.
  • STURDY CONSTRUCTION: This mini woodworking lathe is made of premium cast iron and all its wear-resistant metal gears provide efficient power transmission, assuring you of a long service life.
  • WIDE APPLICATION: This mini metal lathe comes suitable for many processing tasks needing extreme precision including turning, drilling, threading, and cutting.
Check Stock

ATOMSTACK Honeycomb Working Table F1 for Laser Engraving and Cutting Machine, Honeycomb Working Panel for Fast Heat Dissipation and Desktop-Protecting, Compatible with All Laser Cutter,380x284x22mm

  • Fast heat dissipation:The size of the honeycomb laser bed is scientifically calculated, which can make the carving object get fast heat dissipation during the carving process, and the cutting edge is more refined, while avoiding the burning of the carving object due to excessive temperature..
  • Cutting Through Observable Design: When the laser cuts through wood or acrylic, the metal plate at the bottom of the honeycomb table will emit a bright light, which means that the cutting has penetrated. Solve the problem that ordinary engraving machine is difficult to judge whether cutting through.You don't need to calculate the number of cuts , just keep repeating cutting until the bottom glows, which means the material has been cut through..
  • Applicable laser cutting Machine: The honeycomb board is compatible with mature laser engraving machines. Such as dio, fib, CO2 laser engraving machine. If you encounter any problems in use, please do not hesitate to contact our seller customer service, our professional after-sales engineer team will solve all problems for you..
Check Stock

SCULPFUN Laser Engraver Working Table,Laser Honeycomb Pad,Desktop Protection,11.81x7.87x2.17 in,for Laser Engraving Machine Cutter Tool Set

  • 【Cut through observable design】Laser Honeycomb Working Table contains a very convenient cutting and observing design. When the laser cuts through wood or acrylic, the metal backing plate at the bottom of the honeycomb panel will emit a bright light, which means that the cutting has penetrated. Solve the problem that ordinary engraving machine is difficult to judge whether to cut through..
  • 【Necessary accessories for laser cutting]】Laser Honeycomb Working Table uses the laser cutting table to cut wood, acrylic and other materials. The edges of the wood are neat and clean, not easy to be yellowed by smoke, and a clean cutting work can be obtained..
  • 【Metal desktop protection board】Honeycomb Working Table is equipped with a metal desktop protection board, which can protect the table from laser damage. The Laser Protection Pad is very suitable for small DIY diode lasers..
  • 【High-quality workmanship with measuring ruler】The X-axis and Y-axis of the Laser Honeycomb Working Table contain precision scale lines to form a right-angle measuring ruler, which is convenient for you to quickly measure the size of the engraving. The Laser Protection Pad is made of metal and processed by high-precision CNC. The structure is firm, not easy to deform, and has....
Check Stock

Metal Cutting 7.25” Circular Saw – Cut Metal, Saw Steel – 7 1/4” TCT Circular Saw Blade Included | 45 degree Bevel Cut | Dry-Cut Saw | 15 Amp Corded Evolution S185CCSL – Accurate. Powerful. Reliable.

  • DRY CUT – Evolution gives you the cleanest, fastest and most professional cuts through metal with virtually no heat or sparks! Dry cut technology achieves cool-to-the-touch, burr free and instantly workable cuts, unlike abrasives..
  • CARBIDE-TIPPED BLADE INCLUDED – Premium carbide-tipped 40-tooth TCT steel saw blade significantly outperforms abrasives. Powered by a 15-amp motor, the Evolution cuts through metal like a hot knife through butter..
  • BEVEL CUT 0-45 degrees – The Evolution metal cutting circular saw cuts accurate bevels up to 45 degree angle. No need for separate beveling tool or technique to make your bevels, just change the angle of the Evolution and get it done in seconds..
  • CUT VIEWING WINDOW – A tough glass window gives you clear visibility of your cutting line. The Evolution is equipped with a quick-stop blade brake, ergonomic T-grip handle and 10ft rubber cord for safe and comfortable all-day cutting..
  • 3 YEAR WARRANTY – This heavy duty metal cutting saw is extremely robust and durable and backed by a 3-year warranty and friendly US-based customer service team..
Check Stock

3M Silver Cut-Off Wheel - Type 1 Metal Cutting Wheel - For Angle Grinder or Cut-Off Tool - 3\ x .035\ x 3/8\ Arbor Hole - 87458

  • GREAT PERFORMANCE AND VALUE – Designed for high-performance metal cutting while helping reduce your abrasive spend.
  • DELIVERS A FAST, CONSISTENT CUT – Ceramic 3M Precision-Shaped Grain cuts exceptionally fast, helping increase productivity.
  • LONG LASTING – Exceptional durability for extended wheel life.
  • CUTS A VARIETY OF METALS – Designed to easily cut through carbon steel, stainless steel, mild steel, aerospace alloys and more.
  • USED IN MANY INDUSTRIES – Quickly cuts through metal pipes, tubes, flat sheets and more in shipbuilding, rail, and general metal fabrication.
Check Stock

LENOX Tools Metal Cutting Reciprocating Saw Blade with Power Blast Technology, Bi-Metal, 8-inch, 18 TPI, 25/PK, Model:20487B818R

  • Bi-metal construction for durability and long life.
  • Power Blast Technology strengthens the blade to reduce breaks.
  • Versatile blade cuts easily through thin and medium metals.
  • T2 Technology allows efficient cutting in the widest range of materials.
  • T2 technology tooth design delivers up to twice the life and cuts heavy materials more easily.
  • Bi-metal construction allows blades to bend and flex without breaking.
  • Designed to minimize friction and heat build-up while cutting through the widest variety of metal materials.
  • 18 tooth per inch blades are best for use with medium-thickness metals.
Check Stock