ReviewsThrough Hole Components

On The Plus Side Pt.2 (Special Kwe Instrumental Remix)

  • LOCKS FROM BOTH SIDES - This gate latch has usable locks on both sides of the gate for easy entry going in either direction.
  • EASY INSTALLATION - Drill one hole through post and the rest is simple.
  • fits posts 1-6" deep and comes with 5" and 6" connector rods.
  • INDUSTRIAL STRENGTH MATERIAL - Our gate locks are made of super strong industrial strength polymer and 316 marine-grade stainless components.
  • FOR METAL, WOOD & VINYL GATES - The LokkLatch Plus is made for securing metal, wood and vinyl gates.
Check Stock

Aohcae Flexible Cable Cord Grommet 6Pcs - 1 Inch Silicone Desk Grommets Cable Pass Through Wall Grommets Wire Hole Cover for Table and Other Furnitures (White)

  • 【Packing contents】You will receive 6pcs 1 inch grommets in the package. The desk grommet is made of sturdy silicone and it is durable for long-time use, corrosion resistance..
  • 【Flexible Opening Design】Rubber grommets can accept multiple wires from any direction and can pass through any cable up to 0.8 inches (diameter).
  • 【Effective Cord Management】Wire grommets organize wires and cables to keep the office desk clean and tidy, and cover sharp edges of hole. It is also a good decoration for Wire holes..
  • 【Easy to install】Cable hole cover is very easy to install, no other tools are required. You just need to put the black grommets directly into the 0.97inch/24.5 mm diameter holes, Flexible openings can accept multiple wires from any direction..
  • 【Wide Application】Silicone cord hole covers are suitable for computer components, workstations, office desks, tabletops or other furniture..
Check Stock

ElectroCookie Proto Shield Kit Compatible with Arduino Mega R3, Stackable DIY Expansion Prototype PCB (2 Pack)

  • Useful in creating your own DIY electronic projects.
  • 2 hole strips with power bus lines for quick and easy prototyping.
  • 15% larger than other other protoshields for extra components.
  • High-quality and Gold-plated finish to prevent oxidation, and all holes are through-plated for mounting strength.
  • Lead free and RoHS compliant, Environment-friendly.
Check Stock

Dr.Fish Egg Sinker Oval Shaped Fishing Weights Sinkers Bass Fishing Casting Freshwater Saltwater Slip Sinker 3oz

  • One pound of egg sinkers, packaged in a poly bag.
  • Few sinkers have a reputation like the famous Egg Sinker.
  • Great sinker for all types of fishing, in both fresh and salt water.
  • Included components: fishing terminal tackle.
Check Stock

Recessed D-Ring 6,000 lb Cap Tiedown w/ Backing Plate - 4 pack

  • 4 sets of D-rings and backing plates. Both components are zinc coated to inhibit corrosion..
  • Each D-ring has a 6,000 lb straight pull capacity. For Rated Capacity Description - see below..
  • Instructions included. D-ring SPECIFICATIONS: See diagram in the photo gallery..
  • BACKING PLATE is used for support under the floor preventing the bolts from pulling through..
  • INSTALLATION - these D-rings require routing, or cutting a hole in the floor. More details below..
Check Stock

Treedix 9 pcs Mini Solderable BreadBoard Universal Board PCB Prototype Shield Board Double Sided Tinned Gold Plated Holes Compatible with Arduino Kit Raspberry Pi Shield Prototyping and Testing

  • The features of this board is that you don't have to insert the pins of components and kits in the group of holes. Components and kits can be mounted....
  • Used for electronic experiments and point-to-point DIY soldering projects, can be expandable with pin header and female header, designing your own....
  • Standard IC spacing 2.54MM hole plated through among the pad can be perfectly working with 3mm&5mm LED Diode kit, Electrolytic Capacitor kit,....
  • Electroless Nickel Gold finished prevent the copper on PCB from being oxidized and corroded and is good for soldering and touching. To be your....
  • Made of glass fiber FR-4 material, having the features of high heat resistance, corrosion resistance, mechanical strength, insulation..
Check Stock

Muzerdo 131PCS Sae and Metric Coated Bearing Steel Tap and Die Rethreading Kit

  • ...lboxes that are not immediately intuitive to have but become essential to your work once you have it. It does not matter if you are a mechanic, a craftsman, a metal or woodworker, or even a DIY enthusiast, a tap and die set would be remarkably useful to you. Taps and dies are cutting tools used to create threads on components such as screws, bolts, nuts and to create a threaded hole to screw components into..
  • A tap is a threaded tool that cuts or forms threads in the female portion of a mating pair. Therefore, a tap will create threads in the inside of a hole. On the other hand, a die is a threaded tool that cuts or forms threads in the male portion of a mating pair. Therefore, a die will create threads on a cylindrical rod's surface to create a screw or bolt. Both a tap and a die create new threads or repair damaged threads..
  • Our tap and die set consists of taps, dies, and drill bits of different sizes for various applications. Included in the set are handles for turning. The collection also consists of screw extractors and charts to determine the correct drill and taps to match the thread size and pitch. Some sets may contain twist-lock guides, coarse and fine taps, and other tools at a higher cost..
  • Instead of other kits which are made of low carbon ....
Check Stock

POWERTEC QTN1108 Screw-On Tee Nut 5/16” x 18 8PK Zinc Plated Carbon Steel for Indoor/Outdoor Use - Screw On Flange T Nuts for Non-Rotating Fastening in Your Woodworking Shop

  • FUNCTION: By allowing you to easily add mating threads to your wooden furniture components, these premium, dependable screws give you an efficient way to quickly and securely attach your threaded components to your furniture and cabinets..
  • GREAT ADVANTAGE: With these handy screw-on t nuts, you can secure the mating threads from the attachment surface (rather than through the back, as is the case with regular t-nuts) essential when installing glides and caster onto the ends of legs, and fastening bedposts to beds..
  • SECURE & EASY INSTALLATION: Screw-on design makes for easy, precise non-rotating installation. Simply pre-drill the hole of the nut, accommodating the screw’s 15/32” OD. Three side protrusions on the OD of the screw further enhance positive lock against loosening, even with heavy-duty use. Install utilizing the 3 pre-drilled holes on the nut’s flange..
  • APPLICATIONS: Allows for the easy attachment of wooden legs, feet, glides, casters, levelers, and other components to your furniture, cabinets, shelves, and more. This nut inserts flush to the mating surface to ensure a polished look to your finished pieces..
  • COMPATIBILITY: Works with 5/16”-18 threaded bolted components.
Check Stock

Dalvento Small Venetian Finial- Black Matte

  • MAINTENANCE FREE, ROT FREE, ROYAL BRAND SOLID CELLULAR PVC VINYL – expertly crafted using a CNC Router, for a precision cut every time. May be painted with exterior acrylic latex paint..
  • SUPERIOR STRENGTH – roof has reinforced rafters. Louvered mid-section equipped with interior wood framing brace. 18 gauge Heavy Duty staples used instead of single nails to prevent components from shifting and for increased strength and durability..
  • WEATHERVANE READY – Cupola is ready to accept the Good Directions weathervane as shown. Includes pre–installed weathervane bracket inside the roof for easy installation. Weathervane rod can be easily inserted through the precut hole on top of the roof..
  • SIMPLE ASSEMBLY AND EASY INSTALLATION – Cupola comes in three sections for easy installation and delivery. Includes assembly hardware, predrilled holes and an easy-to-follow installation guide..
Check Stock

4-Pack - Recessed Pan D-Ring Trailer Tie Downs 6,000 Lb Capacity and Heavy Backer Plates Including Mounting Hardware Complete Set 16 Carriage Bolts Washers and Nylon Lock Nuts

  • 4 complete sets of D-rings, backing plates and 2 1/2" hardware kits. Installation instructions included. Both components are zinc coated to inhibit....
  • Each D-ring has a 6,000 lb straight pull capacity. RATED CAPACITY: Also known as "assembly capacity" or "break strength" is the minimum load a....
  • SPECIFICATIONS of d-ring: 1) The base measures 5" x 4-1/2". 2) Hole pattern is 3" x 3-1/2" on centers. Recessed dimension is 3" diameter with a flat....
  • BACKING PLATE is used for support under the floor when installing the tiedown attachments, and prevents the bolts from pulling through.....
  • INSTALLATION - these D-rings require routing, or cutting a hole in the floor. We recommend creating/cutting a template and then transferring to the....
Check Stock

Pandahall 100pcs 22 Gauge Stainless Steel Open Eyepins 2 Inch (50mm) for DIY Jewelry Making

  • Size: about 50mm long, pin: 0.6mm, hole: 2mm.
  • The Stainless Steel will not tarnish and they are strong..
  • This eyepin is great for making small connector or make your own beaded chain..
  • Eyepins are a jewelry design staple. Once the eye pin is strung through the bead or pendant, its eye can be used to link it to other components of the jewelry and the excess wire peaking out..
  • They are lengths of wire featuring a simple loop at one end, so you can easily create beaded links and dangles for your designs. The other end can be finished with loops and wraps..
Check Stock