ReviewsThrust Bearing Washer

MRC R4AFF Small Ball Bearing, Double Shielded, No Snap Ring, Inch, 1/4\ ID, 3/4\ OD, 27000 rpm Max RPM, 261 pounds Static Load Capacity, 632 pounds Dynamic Load Capacity

  • Well made: the needle roller thrust bearing has fine workmanship and a nice stability, which can work well and operate efficiently.
  • Notes: it only bear axial load in one direction.
  • Package includes: you will receive 10 sets thrust needle roller bearings with washers, 3 pieces of each set, a total of 30 pieces, sufficient quantity to meet and satisfy your in daily life.
  • Reliable material: the thrust needle roller bearing is made of steel, has good heat tolerance under heavy load, reliable to use, which also has a nice load carrying capacity and stiffness, with a smooth surface, helping it work well.
  • Easy to use: featuring a steel cage guide rail and evenly distributed rollers, the thrust needle roller bearing take less space, reduce friction, vibration and noise, which is convenient to use.
  • It also can be applied as a raceway between the faces of adjacent machine components by combining 2 thrust washers.
  • Fit for: thrust bearing can be widely applicable in your daily life, such as minibike, agricultural machinery, conveying equipment, trailers, robots, elevators, rolling mills and so on.
Check Stock

10 Sets Thrust Needle Roller Bearings with Washers 0.75 Inch Bore 1.25 Inch OD Industrial Bearing with Nice Load Carrying Capacity and Stiffness NTA1220 2TRA Thrust Needle Roller Bearing

  • Well made: the needle roller thrust bearing has fine workmanship and a nice stability, which can work well and operate efficiently.
  • Notes: it only bear axial load in one direction.
  • Package includes: you will receive 10 sets thrust needle roller bearings with washers, 3 pieces of each set, a total of 30 pieces, sufficient quantity to meet and satisfy your in daily life.
  • Reliable material: the thrust needle roller bearing is made of steel, has good heat tolerance under heavy load, reliable to use, which also has a nice load carrying capacity and stiffness, with a smooth surface, helping it work well.
  • Easy to use: featuring a steel cage guide rail and evenly distributed rollers, the thrust needle roller bearing take less space, reduce friction, vibration and noise, which is convenient to use.
  • It also can be applied as a raceway between the faces of adjacent machine components by combining 2 thrust washers.
  • Fit for: thrust bearing can be widely applicable in your daily life, such as minibike, agricultural machinery, conveying equipment, trailers, robots, elevators, rolling mills and so on.
Check Stock

Hengha Golf Cart Inductive Throttle Sensor Fits for EZGO DCS TXT PDS Medalist 1994+ Electric 25854G01

  • 1.This product suitble for Club Car(DS/IQ)1981-up gasoline and electric..
  • 2.Package Contents: 1. 2 x King Pin Assembly OEM#1016386/1010121 2. 2 x Upper bronze bushing OEM#8067 3. 2 x Lower bronze flanged bushing OEM#7048 4. 2x thrust bearing washer OEM#1010150 5. 2 x king pin wave washer OEM#1016389.
  • 3.Our products are well manufactured and match perfectly..
  • 4.It takes time to replace ASM spindle kits, which can not only improve the stability of your golf cart, but also exercise your practical ability..
  • 5.We are committed to providing you with high-quality service. If you have any demand or question for products, please contact us. Thank you!.
Check Stock

NeJesZoe 8 Inch Steel Wire Brush Cutter Trimmer Head Sets Weeds Blade Cutter Replacement for String Trimmers Gardening Lawnmower Moss Grass Rust Removal 1 Brush&2 Pack Different Adapter Kits

  • 【Sturdy and Durable】8 inch weed brush steel wire wheel brush disc 25.4mm x 200mm trimmer head, fit straight shaft gas trimmer with 1 inch(25.4mm) gear case. the 2 different inside diameter of collar nuts are about 0.315inch and 0.3inch. Thrust Washer(10 teeth) and Thrust plate guard washer (6 teeth). Check your models before buy, make sure the brush fit your model. This weed trimmer brush head is made of high quality manganese steel. Cutting more evenly, weeding more thoroughly and quickly..
  • 【Two Pack Different Adapter Kits】Our weeding brush are delivered one 8"brush with two sets of installation adapter kits. Blade Adapter Attachment Kit: 1 x Thrust Washer(10 teeth)/ 1 x Rider Plate/ 1 x Collar Nut(0.315inch inside diameter)/ 1 x Screwdriver. Blade Adapter Kit: 1 x Thrust plate guard washer (6 teeth)/ 1 x Thrust washer/ 1 x Rider plate/ 1 x Lock nut(0.3inch inside diameter)..
  • 【Quick and Stable Weeding】The weed brush with twist knot wire and internal holding plate to ensure stability and safety. it is a practical spare part of the trimmer. Very suitable for cutting thick grass, tall grass, nettles, thorns, bushes, saplings, etc. Especially grass in corner or brick gap, remove heavy corrosion, rust, paint, spatter and scale removal while als....
Check Stock

10pcs 6700ZZ Thin Section Bearing Thin Wall Mini Ball Bearings Double Shielded 10x15X4mm

  • This A-Type, angular contact ball bearing is best suited to applications with high axial loads. This bearing also works well in radial or combined radial-thrust applications but should never be used alone to support moment loads or reversing axial loading..
  • Thoroughly coated in MIL-PRF-3150 or MIL-PRF-6085 oil and drained of excess and vacuum sealed in a plastic bag for shipping..
  • Manufactured to ABEC 1F precision tolerances related to the bearing bore, outer diameter, radial runout, axial runout and radial play..
  • Static Thrust Rating 970 pounds, Dynamic Thrust Rating 960 pounds.
  • This RBC thin section ball bearing can be advantageous in a design where space limitations, combined loading, or weight restrictions are proving to be challenging to overcome with a traditional ball bearing solution..
Check Stock

Mardatt 24 pcs 3 Type Thrust Needle Roller Bearings with Washers, AXK3552, AXK2035, AXK2542 Chromium Steel Rollers for Automobiles, Pump, Machine Tools

  • 【3 Size Thrust Needle Roller Bearing Assortment】You will get 9 pcs 20*35*2MM thrust needle roller bearings with washers, 9 pcs 25*42*2MM thrust needle roller bearings with washers, 6 pcs 35*52*2MMthrust needle roller bearings with washers, totally 24 pcs..
  • 【Premium Material】Made of chromium steel featured with a nice load carrying capacity and stiffness, high hardness, and high precision, smooth surface no residual burr that smooth to touch. Heat treatment process makes the bearing ball stronger, avoiding to deformed for a long time..
  • 【Feature】Needle Roller Thrust Bearings can accommodate axial loads in one direction only. Low noise and long service life, easy to maintain. Keep the bearing working environment clean and bearing lubricated in time..
  • 【Huge Function】Designed for low speed operation and axial loads only. Steel cage guides and evenly spaced rollers for reduced friction, vibration, and noise..
  • 【Wide Application】 Combined with 2 washers, make objects rotating smooth! Perfect for oven turntable, pump, rotating applications, motors, bikes, air conditioning, machine tools, automobiles, ect..
Check Stock

General Motors 12643668, Engine Crankshaft Thrust Washer

  • Thrust washers limit axial movement and provide a bearing surface. Thrust bearings are designed to support axial load..
  • Thrust washers either have multiple tapered ramps and relatively small flat pads or have curved surfaces that follow a sine wave contour around their circumference..
  • Tear-drop or through grooves on the flange faces and wedge shaped ramps at each parting line allow engine oil to enter between the shaft and bearing surfaces..
  • Manufactured to meet or exceed OE specifications.
Check Stock

NeJesZoe Gardening Machine Lawnmower Blade Adapter Attachment and Universal Blade Trimmer Head Adapter Kits Replacement for String Trimmers Brush Cutter (with 2 Pack Different Adapter Kit)

  • 【What You'll Get】Two Pack Different Adapter Kits! The First Kit: blade adapter attachment maintenance washer kit contains: 1 x Thrust Washer(10 teeth)/ 1 x Rider Plate/ 1 x Collar Nut/ 1 x Screwdriver/1 x Attached washer. The Second Kit: universal blade trimmer head adapter kit: 1 x Thrust plate guard washer (6 teeth)/ 1 x Thrust washer/ 1 x Rider plate/ 1 x Lock nut/1 x Attached washer. Two different kits that there will be a match that suits you and makes you satisfied..
  • 【Good Compatibility】Two different sets of adapters can basically meet the needs of most weed trimmer. If you need to replace the blades, you must buy these sets of parts. Perfect kits for your string trimmers. Conveniently to use. Universal and practical replacement adapter kits..
  • 【Easy to Install】You can choose the blade adapter kits that suit you according to the installation steps on the fourth and fifth pages of the product details page. Easy to replace the string spool on the trimmer with the adapter kits..
  • 【High Quality Material】Made of high quality steel material, sturdy and durable,will not deform easily. It’s a reliable replacement for the old or damaged parts. Durable blade adapter attachment kit fits tight and there was very little vibration..
Check Stock

Clevite TW-678S Engine Crankshaft Thrust Washer Set

  • Thrust washers limit axial movement and provide a bearing surface. Thrust bearings are designed to support axial load..
  • Thrust washers either have multiple tapered ramps and relatively small flat pads or have curved surfaces that follow a sine wave contour around their circumference..
  • Tear-drop or through grooves on the flange faces and wedge shaped ramps at each parting line allow engine oil to enter between the shaft and bearing surfaces..
  • Manufactured to meet or exceed OE specifications.
Check Stock

Clevite TW-473S Engine Crankshaft Thrust Washer Set

  • Thrust washers limit axial movement and provide a bearing surface. Thrust bearings are designed to support axial load..
  • Thrust washers either have multiple tapered ramps and relatively small flat pads or have curved surfaces that follow a sine wave contour around their circumference..
  • Tear-drop or through grooves on the flange faces and wedge shaped ramps at each parting line allow engine oil to enter between the shaft and bearing surfaces..
  • Manufactured to meet or exceed OE specifications.
Check Stock

3575169 Turbocharger Rebuild kit for Holset HX35 HX35W HY35 HX40 HE351 HE351CW

  • ★100% brand-new, never ever been utilized, all parts are tested and quality controlled prior to shipment.
  • ★Fit for Holset HX35 HX35W HY35 HX40 HE341 HE351 & HE351CW turbochargers.
  • ★Improved thrust bearing with large diameter oil feed holes.
  • Complete gasket set included. including 28 quality components.
  • ★Commons Vehicles With This Turbo: for Dodge Ram Cummins Turbo Deisel.
  • ★This kit includes: Machined from Copper Bar Upgraded Thrust Bearing 2 Journal Bearings 4 C-Clips to Hold in the Bearings 1 Thrust Collar 1 Thrust....
Check Stock