ReviewsThrust Collar

10 Sets Thrust Needle Roller Bearings with Washers 0.75 Inch Bore 1.25 Inch OD Industrial Bearing with Nice Load Carrying Capacity and Stiffness NTA1220 2TRA Thrust Needle Roller Bearing

  • Well made: the needle roller thrust bearing has fine workmanship and a nice stability, which can work well and operate efficiently.
  • Notes: it only bear axial load in one direction.
  • Package includes: you will receive 10 sets thrust needle roller bearings with washers, 3 pieces of each set, a total of 30 pieces, sufficient quantity to meet and satisfy your in daily life.
  • Reliable material: the thrust needle roller bearing is made of steel, has good heat tolerance under heavy load, reliable to use, which also has a nice load carrying capacity and stiffness, with a smooth surface, helping it work well.
  • Easy to use: featuring a steel cage guide rail and evenly distributed rollers, the thrust needle roller bearing take less space, reduce friction, vibration and noise, which is convenient to use.
  • It also can be applied as a raceway between the faces of adjacent machine components by combining 2 thrust washers.
  • Fit for: thrust bearing can be widely applicable in your daily life, such as minibike, agricultural machinery, conveying equipment, trailers, robots, elevators, rolling mills and so on.
Check Stock

Sealmaster SC-23T Ball Bearing Cartridge Unit, Skwezloc Collar, Felt Seals, Cast Iron Housing, Inch, 1-7/16\ Bore, 3-7/8\ OD, 1-3/4\ Width, ±2 degrees Misalignment Angle

  • Cylindrical cartridge housing with ball bearing insert for supporting shafts with radial or combined radial and thrust loads.
  • Skwezloc locking collar for secure attachment to shaft.
  • Cast iron housing for strength and durability.
Check Stock

Linkhood 8 Inch Steel Wire Brush Cutter Trimmer Head Replacement Garden Grass Weed Brush Cutting Head for Rust Removal Paving Stone Pavement Joints or Driveway with Universal Adapter Kit

  • ...s.Please wear protective equipment when working.
  • Aperture 1 inches(25mm), 1 inch hole weed trimmer fit 99% straight shaft strimmer. Easy to install, simply screw the head onto the trimmer unit for quick set up.
  • WHAT YOU GET: 1 x 8inch Steel wire trimmer head, Universal Adapter Kit - 1 x Thrust plate guard washer (6 teeth)/ 1 x Thrust washer/ 1 x Rider plate/ 1 x Collar nut.
Check Stock

Sealmaster SC-20R Ball Bearing Cartridge Unit, Set Screw Locking Collar, Felt Seals, Cast Iron Housing, Inch, 1-1/4\ Bore, 3-1/2\ OD, 1-1/2\ Width, ±2 degrees Misalignment Angle

  • Cylindrical cartridge housing with ball bearing insert for supporting shafts with radial or combined radial and thrust loads.
  • Skwezloc locking collar for secure attachment to shaft.
  • Cast iron housing for strength and durability.
Check Stock

Oceanic Viper 2 FF (Blue, LG(10.5-11.5))

  • Ideal for all diving and snorkeling skill levels.
  • Flexible Power Thrust Channel directs water off the tip of the blade for improved power and efficiency.
  • Power Vents reduce stress while accelerating water over the blade. Oversized blade produces increased thrust and propulsion..
  • Extremely lightweight for increased performance and ease of travel.
Check Stock

General Motors 12643668, Engine Crankshaft Thrust Washer

  • Thrust washers limit axial movement and provide a bearing surface. Thrust bearings are designed to support axial load..
  • Thrust washers either have multiple tapered ramps and relatively small flat pads or have curved surfaces that follow a sine wave contour around their circumference..
  • Tear-drop or through grooves on the flange faces and wedge shaped ramps at each parting line allow engine oil to enter between the shaft and bearing surfaces..
  • Manufactured to meet or exceed OE specifications.
Check Stock

Enduro ABEC-5 Angular Contact Bearing, 71903 17X30X7-71903 LLB

  • Single-row angular contact ball bearing, supporting moderate to heavy one-directional thrust loads, and combined loads where thrust load is predominant.
  • Ball contact angle of 40 degrees relative to the inner and outer raceways increases thrust load capacity.
  • Open configuration for lubrication applied in place.
  • Brass cage evenly spaces balls for reduced friction, vibration, and noise.
  • ABEC 1 tolerance ratings for accuracy and low rotational speeds.
Check Stock

Clevite TW-678S Engine Crankshaft Thrust Washer Set

  • Thrust washers limit axial movement and provide a bearing surface. Thrust bearings are designed to support axial load..
  • Thrust washers either have multiple tapered ramps and relatively small flat pads or have curved surfaces that follow a sine wave contour around their circumference..
  • Tear-drop or through grooves on the flange faces and wedge shaped ramps at each parting line allow engine oil to enter between the shaft and bearing surfaces..
  • Manufactured to meet or exceed OE specifications.
Check Stock

Clevite TW-473S Engine Crankshaft Thrust Washer Set

  • Thrust washers limit axial movement and provide a bearing surface. Thrust bearings are designed to support axial load..
  • Thrust washers either have multiple tapered ramps and relatively small flat pads or have curved surfaces that follow a sine wave contour around their circumference..
  • Tear-drop or through grooves on the flange faces and wedge shaped ramps at each parting line allow engine oil to enter between the shaft and bearing surfaces..
  • Manufactured to meet or exceed OE specifications.
Check Stock

4pcs EMAX RS2205 2300KV Brushless Motor 2CW 2CCW for QAV250 QAV300 FPV Racing Drones Multirotor Quadcopter

  • Update Version:Compared to the RS2205, maintain the RS2205 2600KV Brushless Motor's advantage, and 2 grams lighter than the first version of the RS2205,and the new RS225-S cranks out another +100g of thrust..
  • High Quality Guarantee:The new standard of EMAX RS2205-S 2600KV Brushless Motor is upgraded with features racing multirotors absolutely need. The motor is lighter, yields faster bell rotational response, higher thrust..
  • Strong Thrust Power: Produces over +1,000g of thrust using 4S and GF5045BN, is more stronger than other ordinary 2205 brushless motor..
  • Support Your Racing Drone:This 2205S 2600KV brushless motor is perfect for your 210 220 250 280 FPV racing drone quadcopter, and suitable for 5 inch propellers like 5030 5035 5045 props.
  • Size and Design:This have a weight Approx 30g with a normal size-0.87*0.2 inch. 2205-S 2600KV Brushless Motor is no difference between CW and CCW..
Check Stock

Industrial Black Metal Furniture Legs,Black Cast Iron Table Legs,RetroHeavy Duty Square Tube Desk Legs,Metal Dining Coffee Work Table Bench Furniture Legs,Set of 2

  • Two-bolt housing with ball bearing insert for a ready to mount installation.
  • Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
  • Relubricatable solid one-piece housing pillow block for maximum strength and rigidity.
  • Non-expansion-type bearing with setscrew locking collar for secure attachment to guided shaft.
  • Felt seal to protect against contaminants and retain lubrication.
Check Stock