ReviewsThrust Needle retainer Assembly

POLEMOTOR Universal Professional 27pcs Disc Brake Piston Caliper Compressor Rewind Wind Back Tool Compatible for Brake Pad w/Case and Gloves

  • Package included: 27pcs Disc Brake Caliper Wind Back Tool Kit (18 disc adapters Suit.
  • Fit variety vehicle makes and models including American, European, and Japanese.
  • Made of durable carbon steel and rust-proof blasted finish.
  • Each kit contains detailed instructions for use, and with a diagram of parts, and make installation easily..
Check Stock

Koyo NTA-3244 Needle Roller and Cage Thrust Assembly, Open, Steel Cage, Inch, 2\ ID, 2-3/4\ OD, 5/64\ Width, 6100rpm Maximum Rotational Speed, 29800lbf Static Load Capacity, 5400lbf Dynamic Load Capacity

  • Thrust needle roller and cage assembly for applications with high dynamic loads.
  • High axial load capacity with reduced cross-section for use in restricted spaces.
  • Steel cage guides and evenly spaces rollers for reduced friction, vibration, and noise.
  • Through-hardened, high-carbon chromium steel rollers for heat tolerance and durability under heavy loads.
  • Meets ANSI/ABMA standard 21.2 for quality assurance.
Check Stock

Koyo NTA-3648 Needle Roller and Cage Thrust Assembly, Open, Steel Cage, Inch, 2-1/4\ ID, 3\ OD, 5/64\ Width, 5600rpm Maximum Rotational Speed, 32000lbf Static Load Capacity, 5570lbf Dynamic Load Capacity

  • Thrust needle roller and cage assembly for applications with high dynamic loads.
  • High axial load capacity with reduced cross-section for use in restricted spaces.
  • Steel cage guides and evenly spaces rollers for reduced friction, vibration, and noise.
  • Through-hardened, high-carbon chromium steel rollers for heat tolerance and durability under heavy loads.
  • Meets ANSI/ABMA standard 21.2 for quality assurance.
Check Stock

All Balls 28-1005 Swing Arm Bearing Kit

  • Specs: Swing Arm Bearing Kit, Needle Bearings 52100 bearing steel ARC6.
  • POM composite washer bearings replace thrust needle washers for superior resistance twater and dirt and increased service life.
  • Compatible With/Replacement For: Suzuki LT-250R 1985 - 1992, LT-500R 1987 - 1990.
  • 100% New aftermarket Swing Arm Bearing Kit built to meet OEM specifications.
Check Stock

Koyo NTA-1220 Needle Roller and Cage Thrust Assembly, Open, Steel Cage, Inch, 3/4\ ID, 1-1/4\ OD, 5/64\ Width, 14000rpm Maximum Rotational Speed, 8200lbf Static Load Capacity, 2450lbf Dynamic Load Capacity

  • Thrust needle roller and cage assembly for applications with high dynamic loads.
  • High axial load capacity with reduced cross-section for use in restricted spaces.
  • Steel cage guides and evenly spaces rollers for reduced friction, vibration, and noise.
  • Through-hardened, high-carbon chromium steel rollers for heat tolerance and durability under heavy loads.
  • Meets ANSI/ABMA standard 21.2 for quality assurance.
Check Stock

Koyo NTA-2840 Needle Roller and Cage Thrust Assembly, Open, Steel Cage, Inch, 1-3/4\ ID, 2-1/2\ OD, 5/64\ Width, 6800rpm Maximum Rotational Speed, 30900lbf Static Load Capacity, 5690lbf Dynamic Load Capacity

  • Thrust needle roller and cage assembly for applications with high dynamic loads.
  • High axial load capacity with reduced cross-section for use in restricted spaces.
  • Steel cage guides and evenly spaces rollers for reduced friction, vibration, and noise.
  • Through-hardened, high-carbon chromium steel rollers for heat tolerance and durability under heavy loads.
  • Meets ANSI/ABMA standard 21.2 for quality assurance.
Check Stock

MEETOOT 6 Sets Thrust Needle Roller Bearings NTA1220+2TRA Thrust Needle Roller Bearing with Two Washers 3/4

  • The needle roller thrust bearing can only bear axial load in one direction.
  • Used in combination with two thrust washers for applications where adjacent machine components cannot be used as raceways.
  • Steel cage guide rail and evenly distributed rollers to reduce friction, vibration and noise.
  • The hardened chromium steel roller has heat resistance and durability under heavy load.
  • Rolling bearings are widely used, ranging from agricultural machinery to conveying equipment, robots, elevators, rolling mills, rudder shafts and aggregate crushers.
Check Stock

Bailey Universal Joint Assemblies (Standard Series) - Universal Joint with Relubricable Bearings - Standard U Joint, 7/8’’ x 7/8’’ ID, 3/16’’ Keyway, 1000 RPM, 5” Overall Length, 2.5 lb, 133015

  • SPECIFICATIONS: This 1 universal joint is a standard rod end ball joint with 7/8’’ x 7/8’’ inner diameter, 3/16’’ keyway, and 1000 RPM. It allows a maximum deflection of 90 degrees and is 5 inches long. Our ball joint weighs 2.5 lb..
  • HIGH SPEED: Our robust Cardan joint can withstand a maximum torque of 800 lb-inches at a consistent speed of 1000 RPM. This universal joint assembly is best suited for high-speed, high torque operations..
  • TOUGH: With simple but precise construction, this U Joint from Bailey is capable of coupling laterally dissonant shafts. It reduces side thrust on bearing bushings, protecting them from damage even when subjected to long-term use..
  • FLEXIBLE: This standard rod ends ball joint allows up to 15% angular displacement at peak velocity. The universal ball rod assembly facilitates easy Up/Down movement of the drive shaft in automobile, industrial, and commercial applications..
  • MADE TO LAST: These universal joints have radical drop-forged slip yokes along with relubricable needle bearings. They are resistant to everyday wear and tear, have exceptional tolerance of high torques, and are built to go the mile..
Check Stock

Acymner 24PCS Disc Brake Caliper Tool Kit | Heavy Duty Disc Brake Piston Caliper Compressor Rewind Tool Set for Brake Pad Replacement Reset, Fits Most American European Japanese Autos (Blue)

  • Durable Material: This disc brake caliper tool set is made of 45# carbon steel with rust-proof blasted finish, all components of our brake caliper compression tool are designed for repeated use with high quality materials. Hand thrust bolt has magnetic design to prevent disc adapters from falling off..
  • Easy Operation: The brake caliper tool also includes 2 hand thrust bolt assemblies(right & left). For brake pad and shoe replacement and rotating pistons back into the caliper on your car, truck or 4 wheel drive disc brake vehicles..
  • A Complete Caliper Compression Tool: This brake tool kit includes right and left handed thrust bolts, 2 retaining plates, 18 disc adapters,1 pair of gloves and a convenient carry case for secure storage, meet most of your adaptation needs..
  • Universal Compatibility: The heavy duty brake caliper tool kit includes 18 adapters fitting most of vehicles makes and models including American, European, and Japanese..
  • Storage Case: The brake caliper compression tool is packed in a heavy-duty case with precision-sized compartments for every piece - great for st....
Check Stock

MOSNAI Golf Cart Front End King Pin Repair Kit for Club Car DS 1981-Up Gas/Electric Golf Cart OEM# 1016386/1010150/1016389/8067/7048（Pack of 2）

  • ✅【Fit Models】The front end king pin repair kit for Club Car DS 1981-up G&E Golf Cart, fit Delta A plate + nut..
  • ✅【Replace OEM Part】Brand new king pin assembly 1016386, Upper Spindle Bushings 8067, Lower Bushing Flanged 7048, Thrust Bearing Washer 1010150, Kin Pin Wave Washers 1016389..
  • ✅【Function】This king pin repair kit will do your whole cart, for both the driver and passenger sides.Perfect fit, directly replaces worn out original king pins, could improve the front end performance a lot..
  • ✅【High Quality】 Well made, meets OEM specifications, please carefully check the year, model and serial number of your golf cart before purchasing..
  • ✅【Package Content】 2 x DS King Pin Assembly, 2x Upper Spindle Bushings, 2x Lower Spindle Bushings, 2x Thrust Bearing Washer, 2x Kin Pin Wave Washers,2 x Hex Locking Nut..
Check Stock

Toro 105-3040 Recycler Rear Wheel Gear Kit

  • Kit includes: 2 x 105-3040 Pinion gears, 2 x 65-2720 Retaining Clips, 4 x 105-6840 Thrust Washers, 2 x 39-9650 Compression Springs, 2 x 612066 Keyways.
  • Works with Toro rear wheel drive recycler mowers with rear pinion gear part number 105-3040.
  • PLEASE NOTE: Check your owner's manual to be sure 105-3040 is the correct replacement part for your model..
Check Stock