ReviewsTie Rods For Duramax

Shorty's Skate Tool The Wench

  • Fitment: Locks flywheel in place when removing harmonic balancer on 6.6L Duramax engines with Allison automatic transmissions..
  • Function: Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement..
  • Duramax 2500 / 3500 Pickups (Toothed pieces only): Removes metal spring-loaded inspection plate on the bottom of the transmission. Tool should slide into opening toward engine with the top of the tool engaging the teeth of the flywheel..
  • Duramax 4500 / 5500 Trucks (Toothed pieces with screws): Remove the rubber inspection cap on the bottom of the transmission. Insert the tool at the front of the opening to engage the flywheel and hand tighten bolt to hold tool in place..
  • 36mm 12-point Socket: Use with 3/4" square drive to remove harmonic balancer bolt and retorque on installation. 36mm 12 point socket can also be used on axle..
Check Stock

Detroit Axle - Front Upper Ball Joints + Sway Bars + Tie Rods w/Boots Replacement for Toyota Tundra Sequoia - 10pc Set

  • Replacement for 2003-2006 Toyota Tundra - [2003-2007 Toyota Sequoia].
  • Kit Includes: 2x Front Sway Bars + 2x Front Inner Tie Rods + 2x Front Outer Tie Rods + 2x Front Upper Ball Joints + 2x Tie Rod Boots + Bellows w/locking c-clamps.
  • Detroit Axle Suspension Components are Ready to Meet the Rigorous Demands of Today's Foreign and Domestic Passenger Cars, Trucks and SUVs.
  • Undergo Impact, Wear, and Fatigue Testing to Help Ensure Quality and Durability.
  • 10-Year Warranty. Detroit Axle Is a Leading Global Retailer and Distributor of OE Re-manufactured and New Aftermarket Auto Parts.
Check Stock

4 PC Interchangeable Tie Rod Tool Kit

  • Used to remove and mount inner tie rods on vehicles.
  • extended shaft and narrow profile allows for use in hard-to-reach and confined spaces.
  • Quick and Easy: Unique no-tools-necessary design allows user to change cages with no additional adapters and saves time due to the unique finger operated snap-ring and high torque capacity.
  • For use on round, hexagonal, and octagonal tie rods.
  • Cages easily adapt to replace or remove square/rectangular, or cylindrical ball joints.
  • Includes 1-1/8 - 1-5/16-Inch (28mm-34mm), 1-5/16 - 1-9/16-Inch (34mm-39mm), 1-9/16 - 1-3/4-Inch (39mm-45mm), and convenient s torage case to keep tools organized and ready for use.
Check Stock

Powerbuilt Master Inner Tie Rod Removal Tool Kit, 13 Pieces, Steering and Suspension, Adapter and Extension Wrench, Storage Case - 647785

  • Designed For The Safe Efficient Removal of Inner Tie Rods.
  • Large Selection Adapters Including 1-3/16", 1-5/16" and 1-7/16".
  • Easily Service Hard To Reach Inner Tie Rods That Require Special Tools.
  • Kit includes usage instruction with photos.
Check Stock

Detroit Axle - Front Lower Ball Joints Inner Outer Tie Rods with Steering Rack Boots For 2001 2002 2003 2004 2005 Lexus IS300

  • For - 2001-2005 Lexus IS300 (Built After 9/00 Production Date).
  • Set Includes: (2) Inner Tie Rods, (2) Outer Tie Rods, (2) Boots, (2) Lower Ball Joints.
  • Undergo impact, wear, and fatigue testing to help ensure quality and durability.
  • Built to strict quality control standards.
Check Stock

Bolaxin Flywheel Locking Tool with 36mm 3/4 Inch Wench for 6.6L Duramax Engine

  • Locks Flywheel in Place When Removing Harmonic Balancer on 6.6L Duramax Engines with Allison Automatic Transmissions.
  • Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement.
  • Use 36mm 12-point socket with 3/4 square drive to remove harmonic balancer bolt and retorque on installation.
  • Duramax 2500 / 3500 Pickups – Use toothed pieces only removes metal spring-loaded inspection plate on the bottom of the transmission. Tool should slide into opening toward engine with the top of the tool engaging the teeth of the flywheel..
  • Duramax 4500 / 5500 Trucks -- Use toothed pieces with screws remove the rubber inspection cap on the bottom of the transmission. Insert the tool at the front of the opening to engage the flywheel and hand tighten bolt to hold tool in place..
Check Stock

SAMSFX Fishing Quick Rod Ties Leash for Pole Holders Organizer Bunngee Cord Straps (20cm / 7.8in, Red)

  • 4 pieces in pack, use for fishing rod ties, perfect for tying up fishing rods together. It made several rods easier to carry when alone.
  • 4mm diameter stretchy bungee rope can firmly tie the fishing rod. 2mm high density foam padding protect your fishing pole from scratching.
  • One touch for quick release and holding, once attached, you just push the button on the clasp to release them. You can even do it with one hand.
  • Medium length 7.8" / 20CM before stretching, in the test of bundling together 5 medium to large saltwater fishing rods with no issue.
  • Great for holding together casting rods, spinning rods and fly rods while being transported, it can be avoided the scatter for the fishing rod bag or storage.
Check Stock

Detroit Axle - 4WD Front Ball Joints + Sway Bars + Tie Rods Suspension Kit Replacement for Cadillac Chevy GMC Escalade Yukon Tahoe K1500 K2500 K1500 Suburban - 15pc Set

  • Replacement For 4WD Models w/45.79mm Diameter Lower Ball Joint.
  • Fits: Specific Models - Check Fitment Chart and Product Description for Accurate Information.
  • Kit Includes: (2) Front Upper Ball Joints, (2) Front Lower Ball Joints, (2) Front Sway Bar Links, (2) Outer Tie Rods, (2) Inner Tie Rods, (2) Tie Rod Adjusting Sleeves, (1) Pitman Arm, (1) Idler Arm and (1) Idler Arm Bracket.
  • Detroit Axle Suspension parts are ready to meet the rigorous demands of today’s foreign and domestic passenger cars, trucks and SUVs.
Check Stock

NUZAMAS Portable Fishing Rod Holder Rack Headrest Mount Rod Storage Bracket for Vehicle Car SUV Van ROOF TOP Rods Transport Carrier

  • High density soft foam, well protect your rods..
  • With straps, easy to hang in the car. Tie straps to the handles on each side of the car ceiling..
  • Perfect for holding rods safely while tackling up or lunching..
  • Particularly great for transport fishing rods in small cars.
  • Capable of holding up to 4 fishing rods or combos.
Check Stock

GlowShift Diesel Gauge Package Compatible with Chevrolet Silverado Duramax & GMC Sierra 2007-2013 - Tinted 7 Color 60 PSI Boost 1500F EGT & Transmission Temp Gauges - Color Matched Triple Pillar Pod

  • GlowShift Diesel Gauge Package for the 2007-2013 Chevy Silverado & GMC Sierra 2500HD 3500HD 6.6L Duramax Truck features a Factory Color Matched Tan....
  • Includes 60 PSI Boost Gauge with 1/8-27 NPT Compression Fittings & 9' Nylon Boost Hose - 1500°F Pyrometer EGT Gauge with 1/8-27 NPT EGT Probe with 3'....
  • Factory Color Matched Tan Triple Pillar Gauge Pod for 2007-2013 Chevy Silverado & GMC Sierra Duramax 2500HD 3500HD Trucks Mounts 3 Gauges to the....
  • Includes GM 6.6L Duramax Installation Guide Complete with Step-By-Step Instructions & Photos that Help Walk You Through the Process of Installing &....
  • GlowShift Guarantee with One Year Limited Warranty & Free Lifetime Technical Support.
Check Stock

OTC 6754 Diesel Fuel Pressure Gauge for GM Duramax Engines

  • For testing fuel pressure on GM vehicles with Duramax diesel engines.
  • Threaded adapter specifically designed for Duramax applications makes hook-up easy.
  • Features an easy to read, black on white gauge face, long hose for remote viewing, and a convenient hang hook for hands free operation and easy storage.
Check Stock