ReviewsTig Tungsten Electrodes

TIG Welding Tungsten Electrode 2% Thoriated 3/32\ x 7\ (Red, EWTh-2) 10-pk YESWELDER

10-pk premium quality TIG welding Tungsten electrodes 2.0% Thoriated ( EWTh-2, Red).
AMERICAN Welding Society standard AWS A5.12M/A5.12:2009 conformance.
Vacuum packing, no oxidation,long time preservation.

Check Stock

HUGEWELD Tig Welder TIG-200,HF TIG/Stick/Arc 2 in 1 TIG Welders,200 Amp 220V TIG Welding Machine,IGBT Inverter Portable Digital Display for Beginner

✅【2 in 1 HF START】TIG200 is high frequency(HF) ignition, stable arc,simple to operate. The conversion efficiency of the whole machine is increased by more than 30%..
✅【IGBT INVERTER】Use the single tube IGBT (the inverter frequency can reach 25-50KHz) to convert 50/60Hz to dc and then to high frequency and lower voltage,portable only 12.54 lbs, 13x6.3x11.4" size !.
✅【2T & 4T 】2T(Manual) / 4T(Semi-auto) switch is available, you can release your finger for long time welding job when on 4T. 2T is suitable for the re-tack welding, transient welding or thin plate welding. 4T is suitable for welding medium thickness plates..
✅【SAFETY and ENERGY SAVING】Automatic Compensation with Voltage Fluctuation, Over-voltage protection, Under Voltage Protection, Over Current Protection, Over Load Protection,Fan dormancy..
✅【EXCELLENT WELDING PERFORMANCE】 Tig welding thickness 0.5-5.0mm under 10-200A output.
application of tungsten electrodes diameter: 1.0/1.6/2.0/2.4/3.0mm. Suitable for welding different metals such as steel, stainless steel, carbon steel etc. (Can’t weld aluminum). ARC welding thickness 2.0-8.0mm under 20-150A current , application of electrodes diameter: 2.5/3.2mm..

Check Stock

HITBOX 4 in 1 Aluminum MIG Welder 200Amp 110V/220V Smart Control IGBT DC Inverter TIG Welder + MMA Stick Mix Gases Gasless Flux Solid Core Wire Welding Machine

【ALL in ONE】 Smart welder for everyone. HITBOX 4 in 1 Function welder starts welding with a button! Choosing weld mode, material, weld wire,....
【Multi-Material Weldable】HITBOX MIG200P inverter welder could weld aluminum, iron, carbon steel, stainless steel, etc. Applies to pipe....
【MIG/MAG Welder】 1. MIXGAS can use 0.6 / 0.8 /0.9/ 1.0mm flux wire. With 0.6 / 0.8 / 1.0mm wire, it can be welded with a thickness of 0.6-3.4mm.....
【TIG /WIG Welder】 Suitable for 1.6 mm and 2.4 mm tungsten. With 1.6 mm tungsten, it can be welded with a thickness of 1.0 to 4.8mm, and with 2.4....
【MMA /ARC Welder】Current 40-170 amperes. 2.5 / 3.2 / 4.0mm electrodes can be welded. Welding thicknesses from 1.6 to 6.4 mm can be welded using....

Check Stock

LOTOS TT132 2 Pin Plug TIG Welding Torch (TIG Welder TIG200)

Designed specifically for LOTOS models TIG200.
Includes a 2 prong 13ft TIG torch and a TIG accessories kit.
TIG accessories kit includes: size 4, 5, 6 Nozzles, 3 collets,1 collet body, 1 tungsten holder.

Check Stock

Forney - 85657 9FV TIG Torch

TIG TORCH FLEXIBILITY-torch head adjusts to make any angle weld, ideally on thin materials.
AIR COOLED TIG TORCH- size 9, single flexhead TIG torch with valve located on handle.
COMPATABLE WITH FORNEY WELDERS- the 9FV TIG Torch holds a 125 AMP capacity with an electrode range of . 02 - 3/32". That can be used with a 200 amp Forney Welder or a lower amp welder with a size 25, DINSE connection.
PRODUCE A HIGH QUALITY WELD-using Forney's TIG Torch on basic materials such as: stainless steel, titanium, magnesium, aluminum and copper.
INCLUDES: 12. 5’ torch with 3/32” collet and tungsten electrode, size #6 nozzle, 5/8” connector and 36” gas hose.

Check Stock

A Dark Heart (Elders and Welders Chronicles Book 2)

️【★TIG&ARC Strong Point】High Frequency Start TIG,Non-Contact Arc Initiation That Reduces Tungsten And Material Consumption.Rated Input Frequency 50/60Hz, Duty Cycle 85%，Improves The Performance Of The Welding Machine..
️【★Feature】TIG/ARC 2-in-1,Tig& ARC Welder With Tig Torch, Earth Clamp, Electrode Holder,Welding Tong.
️【★Portable And Powerful】TIG Welding Thickness 0.3-4.8mm,Stainless Steel, Alloy Steel, Mild Steel, Copper, Cast Iron And Chrome.ARC Welding Thickness 15-42mm.
️【★Energy Saving】Portable Handle Makes It Easier To Operate, The Lightweight Makes It More Convenient To Carry.Suitable For Stainless Steel, Alloy Steel, Carbon Steel, Copper, Copper Alloy And Other Non-ferrous Metal Welding.
️Automatic Compensation For Voltage Fluctuation, Over-voltage Protection, Under Voltage Protection, Over Current Protection, Over Load Protection.

Check Stock

TOOLIOM TIG Welding Tungsten Electrode 2% Thoriated Tungsten 3/32'x 7' (Red, EWTh-2) 10-Pack

Electrode Size: 3/32" x 7" or 2.4mm x 175mm.
Material:2% Thoriated Tungsten (Red, EWTh-2) adhering AMERICAN Welding Society standard AWS A5.12M/A5.12:2009 conformance.
Performance:Good welding performance,long life and operate easily.
To be used on TOOLIOM TL-200T TIG Welder(High Frequency TIG Welding).
Package:Ten (10) pack of premium thoriated tungsten rods ,vacuumed sealed, no oxidation,long time preservation.

Check Stock

WeldingCity 5-Lb ER308L Stainless Steel 308 TIG Welding Rod 3/32\x36\ | Pack of 5-Lb

Packing including: The 53pcs tig welding torch stubby gas lens kit accessories including---4pcs TIG Stubby Gas Lens + 4pcs TIG Gas Lens Collets Body + 12pcs TIG Collets+6pcs #10 Pyrex Glass Cup + 10pcs TIG Alumina Nozzle+3pcs TIG back cup+ 2pcs Gasket Cup+12pcs Temperature Resistant O-rings.
Fit for: 17 & 26 series air cooled torches + 18 series water cooled torches, Lincoln torch model #---PTA-17/PTA-18/PTA-26 , Miller Diamondback torch model#--DB17/DB18/DB26 AND the Weld craft WP-17/ WP-18 /WP-26.
Electric conductivity similar with: 2% thoriated tungsten electrode.
Applicable machine: Mitech, Longetivity,Rilon, Krypton, Riland, Jasic, Chiry, UNT, Berlan etc.

Check Stock

ESAB Rebel EMP 205ic AC/DC Multi-Process MIG/STICK/TIG Welder

True All-Process - excellent performance on MIG, Flux-Cored, STICK (including 6010 electrodes), DC TIG and AC TIG industrial applications.
Professional TIG features such as High Frequency start in DC and AC modes, balance adjustment, frequency adjustment and Pulse DC..
sMIG Technology - exclusive sMIG ("smart MIG") feature continuously learns and adapts to the operator’s welding technique to provide a stable arc....
Unmatched Portability and Durability weighing in at only 49 lbs. (22 kg), Rebel EMP 205ic AC/DC with 5 handle roll cage can tackle any job around the....
TFT Multilingual Display - packed full of features, Rebel EMP 205ic AC/DC has 4 programmable memory locations for each process, multi-language....

Check Stock

Lincoln 225A Gas Engine-Driven Welder K3458-1

3 Year Warranty, 100 Day, 100% Satisfaction Guarantee.
ESAB EMP 210 is a Multi-Process MIG/Flux Cored/Stick/Lift TIG welding system with a 10-200A output. Stable Lift TIG arc at low amperage for total control.
power to run stick electrodes up to 5/32 in. Digital controls with large easy-to-read LED display enable fast, easy and more accurate operation.
Package includes a Tweco Fusion 180 MIG gun with Velocity consumables, Victor Argon/CO2 regulator, Tweco ground clamp with heavy duty 50 mm Dinse connection, 50A-15A (120/230V) power adapter, sample wire spool of ESAB OK AristoRod 12.50 mild steel wire (2#) and 0.024/0.030 and 0.030/0.035 drive rolls., 17v Tig Torch and Electrode holder.
Spool Gun Ready to MIG Aluminum with optional Spool Gun.

Check Stock

Plasma Cutter Welder Combo Pulse TIG Welder Stick Welder 3 in 1 Welding Machine, 50A Plasma Cutting, 200A TIG Welding (Pulse), Arc/MMA Welder More Stable Arc Dual Voltage 110V/220V 520TSCPF

...portability and uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum..
✅【 Pulse TIG Welder】10-200AMP DC TIG electric current output.
The newly added PULSE function makes the welding shape more beautiful and improvers tungsten life. Quality TIG welding on stainless or steel and precise welding of thinner-gauge materials. Easy work with foot-pedal (it is not included in standard accessories). Please make tungsten head sharp before using TIG welder, can get better welding in this way..
✅【STICK/MMA/ARC Welder】Output current 10-180Amps, Hot arc starting, Anti-Stick, Deep welding pool and nice welding surface and few spark. Suitable for welding different acid and basic welding rod size from #1.6mm to #4.0mm..
✅【Multiple Uses 】The welding machine suitable for weld stainless steel, alloy steel, carbon steel and nonferrous metals.
ideal for a welding enthusiast or hobbyist with basic repair needs and general light welding requirements. We have 12 month warranty..
✅ 【 Package Content】1 X 2.5M PT-31 plasma cutter torch....

Check Stock