ReviewsTile Edge Profile

ProGrip Straight Edge Clamp Ideal for Cutting Large Sheets of Plywood and Dado Slots (36 inch Clamp)

  • .... Each clamp is identified by the maximum clamping distance between jaws. Another great application for these clamps is cutting dado slots for bookshelves. The alignment and cutting process for dados is so much easier than ever before with the ProGrip Straight Edge Guides..
  • Each clamp rail is manufactured with a low profile to make guiding your power tool along the edge much easier. The low profile has also been designed with guide accessories in mind. The clamp rails accept many different accessories (sold separately) or can create your very own jigs and fixtures to use with the ProGrip Straight Edge Guides. Each ProGrip Straight Edge Guide has the exact same profile regardless of length..
  • How does it work? Each ProGrip Straight Edge Guide Clamp has one adjustable jaw and one fixed jaw. The fixed jaw typically will go against the edge of the board closest to you. Once you place the clamp on your board with the fixed jaw over the end, the adjustable end gets drawn in against the opposite side of the board. Once set and aligned, you secure the clamp by simply locking it down with the 3 position lock lever..
  • The lock lever on each clamp can be secured into one of three positions, each position provides varying amounts of pressure. Depending on your projec....
Check Stock

JOREST Connectable Profile Gauge 10+5 Inch Gift for Father Men Husband Grandpa Carpenter DIY Contour Duplicator with Lock Outline Marking Tool for Woodworking Floor/Carpet/Tile Laying

  • 【Connectable profile gauge】- You can splice the 5in and 10in profile gauges by tightening 4 silver screws(4 silver screws are located on the 5in....
  • 【Scenarios for 3 size profile gauge】- 5in is very suitable for some narrow spaces.
  • 【Various uses】- 3 kinds of size profile gauges are suitable for woodworking, carpet cutting, tile laying and other purposes. It is a good helper....
  • 【Excellent design】- The connectable profile gauge is designed with 2 measurement units (inches and centimeters).
  • 【Auxiliary Tools】- An S2 steel Phillips 3.0 adjustment screwdriver, used to adjust the tightness of the profile gauge and blades, a tape measure,....
Check Stock

ProGrip Straight Edge Clamps Ideal for Cutting Large Sheets of Plywood and Dado Slots All 3 Clamps 24 36 and 50 inch

  • .... Each clamp is identified by the maximum clamping distance between jaws. Another great application for these clamps is cutting dado slots for bookshelves. The alignment and cutting process for dados is so much easier than ever before with the ProGrip Straight Edge Guides..
  • Each clamp rail is manufactured with a low profile to make guiding your power tool along the edge much easier. The low profile has also been designed with guide accessories in mind. The clamp rails accept many different accessories (sold separately) or can create your very own jigs and fixtures to use with the ProGrip Straight Edge Guides. Each ProGrip Straight Edge Guide has the exact same profile regardless of length..
  • How does it work? Each ProGrip Straight Edge Guide Clamp has one adjustable jaw and one fixed jaw. The fixed jaw typically will go against the edge of the board closest to you. Once you place the clamp on your board with the fixed jaw over the end, the adjustable end gets drawn in against the opposite side of the board. Once set and aligned, you secure the clamp by simply locking it down with the 3 position lock lever..
  • The lock lever on each clamp can be secured into one of three positions, each position provides varying amounts of pressure. Depending on your projec....
Check Stock

Salomon Sight Mens Snowboard 156

  • Rocker and camber blend a perfect balance of edge control and forgiveness..
  • The Aspen Strong Core brings this board above average with extra snap off jumps and heightened responsiveness while carving..
  • Directional twin - A twin shape for freestyle moves with a directional flex for power at high-speed. Binding stance is set back from center slightly..
  • Cross Profile - Camber between the feet for better control, pop and landing stability. Rocker on tip & tail for effortless floatation forward and switch..
  • Quadratic - A blend of elliptic curves for easy turn initiation, effortless direction changes and fluid edge to edge transitions..
Check Stock

ZELCAN Manual Tile Cutter, Hard Alloy Wheel Cutter with Ergonomic Handle for Porcelain Ceramic Tiles, Laser Guided Precision, Adjustable Measurement Ruler, Anti-Skid Feet (48 inch)

  • 48" MANUAL TILE CUTTER: This tile cutter with adjustable stabilizer from Zelcan makes quick and easy work of your home improvement jobs, cutting clean and precise cuts up to 48 inches straight and 33 inches diagonally through ceramic, porcelain, granite, and other tiles up to 0.6 inches thick.
  • PRECISION SCORING: Our flooring tool features a cutting edge laser guide, built in caliper, and metal ridge that runs perfectly parallel to the path of the scoring wheel to ensure you cut your tiles with utmost precision.
  • SUPERIOR STABILITY: The two supporting feet swing out up to 180 degrees to keep everything securely balanced, while the rubber pad anchors ensure your tile cutter stays in place even with applied cutting force.
  • DURABLE CONSTRUCTION: This bathroom floor tile cutter's corrosion resistant steel rails, expertly designed bearings, and heavy duty aluminum base let you handle hassle-free retiling for years to come.
  • EASY OPERATION: Simply use the laser guide to line up your tile with the cutting wheel, score the tile by applying light pressure on the handle, and then gently apply more downward pressure until the tile snaps.
  • make the most your home or commercial space with the assist of Zelcan's manual flooring tile cutter!.
Check Stock

Tanzfrosch 4.5 inch Diamond Saw Blade 4.5\ Cutting Disc Wheel for Cutting Porcelain Tiles Granite Marble Ceramics Works with Tile Saw and Angle Grinder (3 Pack, Blue)

  • ★FIT SIZE: Outer Diameter: 115mm (4.5 inch). Thickness: 1.2mm. Suitable for most tile saws and hand-held angle grinders with a 7/8" Arbor..
  • ★HIGH PERFORMANCE: Tanzfrosch tile cutter blade outer edge is plenty strong, X teeth offer fast and smooth cutting. Thicker center to avoid vibrations and wobbling. High-Performance diamond matrix provides long life and enhanced material removal..
  • ★COMPATIBLE MODELS: It can be used on different types of angle grinders and tile cutters for Wet and Dry cutting..
  • ★WIDE APPLICATIONS: Tanzfrosch tile cutter blade is designed for cutting porcelain, ceramic tile, granite, sandstone quartz, marble, brick, slate, cement backer board . It will be a perfect partner for tile installers and general homemade DIYers..
  • ★BUY WITH CONFIDENCE: If any of our products fail to meet your expectations, please get in touch with us and we will try our best to resolve the issue..
Check Stock

The Tiles Plaza Peel and Stick Tile Edge Trim for Backsplash Tile 36 Inch Self Adhesive Aluminum Trim Molding Decorative Trim 10-Pack Matte Gray

  • The Tiles Plaza Peel and Stick Tile Edge Trim for Backsplash Tile. 36 Inch Self Adhesive Aluminum Trim Molding Decorative Trim. 10-Pack, Matte Gray.
  • Complete Your Backsplash Project: Peel and Stick Edge trim is a perfect complement for your peel and stick backsplash project.They can cover imperfections on the edges for a better decorative effect. Attention: This product is only works with thicker backplash tiles (0.12-0.16Inch of thickness)..
  • Easy to Install: Just peel and stick, peel the back protective film then paste it on the surface you want. It is recommended to use a metal saw blade cut this trims..
  • Double Adhesive: Each trim has two self adhesive tapes, one sticks on the wall and the other on the backsplash tile. Making the adhesion is double compared to others products on the market..
  • Other Uses: Also you can use it as a decorative trim for other applications as well as picture frame, funiture frame, TV background wall, ceiling, mirror, window and door frame etc..
Check Stock

ZELCAN Manual Tile Cutter for Ceramic Tiles or Porcelain Tiles| For Professional, DIY, or Weekend Warriors| Adjustable Laser Guide for Precision Cutting| Anti-Skid Feet| Ergonomic Handle (40 inch)

  • 40" MANUAL TILE CUTTER: This tile cutter with adjustable stabilizer from Zelcan makes quick and easy work of your home improvement jobs, cutting clean and precise cuts up to 40 inches straight and 28 inches diagonally through ceramic, porcelain, granite, and other tiles up to 0.6 inches thick.
  • PRECISION SCORING: Our flooring tool features a cutting edge laser guide, built in caliper, and metal ridge that runs perfectly parallel to the path of the scoring wheel to ensure you cut your tiles with utmost precision.
  • SUPERIOR STABILITY: The two supporting feet swing out up to 180 degrees to keep everything securely balanced, while the rubber pad anchors ensure your tile cutter stays in place even with applied cutting force.
  • DURABLE CONSTRUCTION: This bathroom floor tile cutter's corrosion resistant steel rails, expertly designed bearings, and heavy duty aluminum base let you handle hassle-free retiling for years to come.
  • EASY OPERATION: Simply use the laser guide to line up your tile with the cutting wheel, score the tile by applying light pressure on the handle, and then gently apply more downward pressure until the tile snaps.
  • make the most your home or commercial space with the assist of Zelcan's manual flooring tile cutter!.
Check Stock

3\ x 12\ Antique Mirror Glossy and Beveled Glass Subway Tile (5 Sq ft- Box of 20 Sheets)

  • TILE SIZE: Rectangular, 3 x 6 inches - 76mm x 152mm x 8mm.
  • Great for a border or trim. Finished edge are very smooth for greater durability and 3D beauty. Safe for use in wet areas.
  • Crystal glass tile is fireproof, resistant to abrasion, anti-damping, zero water absorption and super strong to last forever once installed.
  • Guaranteed Service:Free shipping , damaged glass subway tile replace for free.
Check Stock

Linenspa 12 Inch Memory Hybrid Plush-Edge Support-Quilted Foam Cover Mattress, Plush Mattress Queen

  • This high-profile hybrid combines the edge support of an innerspring mattress with the comfort and adaptability of memory foam to create a comfortable and reliable mattress that will last for years to come.
  • Product dimensions: 80” L x 60” W x 12” H | Feel: Plush | Weight: 50 lbs.
  • Plush memory foam actively contours to your body to align the spine and relieve pressure point aches and pains.
  • Available in a medium-firm 8-inch profile, a medium 10-inch profile, or a plush 12-inch profile with edge suppport..
  • Packaging process may leave small brown flecks called carbons in the mattress packaging.
  • These carbons are harmless pieces of plastic and will not stick to your mattress.
Check Stock

Montolit Masterpiuma 93P5 Power 5 Ergonomic Manual Tile Cutter 36" (93cm) Cutting Tool For Tough and Delicate Large Format Glass and Ceramic Tiles for Floor and Wall Tile Installation

  • Montolit tile cutter 93P5 is suitable for cutting tiles up to 36" in length, supports diagonal cutting up to 26"x26" in size, and can cut tiles up to 3/4" (2cm) thick.
  • The Montolit ceramic tile cutter frame is sized and structured in the points of greatest stress with the insertion of “reinforcement brackets” that optimize the machine's behavior for front cuts, thick cuts, or full-body porcelain..
  • The tile cutter hand tool features an oversized goniometric square that can rotate both to the right (+ 45 °) and to the left (- 45 °), allowing precise cuts at different angles.
  • An expanded ceramic cutter support surface or robust die-cast aluminum wings are perfectly integrated into the frames, ensuring improved support to large tiles with diagonal cuts without leaving the machine profile.
  • The tile cutter features a double trestle splitting, which can be closed for normal cuts and opened for cuts on the corner or for mosaic ceramic tile sheets.
Check Stock