ReviewsTile Hole Saw

Lenox Tools 1211932DGHS 32 Diamond Grit Hole Saw 2-Inch or 50.8mm red

  • LENOX Diamond hole saw has a brazed diamond edge for more holes in tile and stone.
  • Diamond-tip hole saw has a durable, robust design for greater versatility in tough applications.
  • Diamond-tipped hole saw cuts holes in less time than carbide-grit or carbide-tipped hole saws.
  • Round holes make removing plugs faster and easier.
  • Uses a 2L, 3L, 6L or 7L standard arbor or a 2L or 6L SNAP-BACK arbor.
Check Stock

Tile Cutter Hand Tool Cut Floor Tile Glass Tile Cut Tiles Straight or Quarter Curve Manual Tile Cutter Tool for Cutting Wall Tile Porcelain Tile and Glass Tile Faster and Cleaner than a Wet Tile saw

  • For Straight Lines And Up to A Quarter Circle Curve The Tile Cutter Is Great, For Semi Circles Inside Corner Cut Outs Around Outlets Doorways And Toilets You Will Want Kit 1 With Tile Hack Saw Blade For Wall Tile And 4 1/2" Grinder Diamond Tile Blade For Porcelain And Floor Tile, Kit 2 Has Tile Drill Bits For Ceramic And Diamond Drill Bits For Porcelain And Glass To Drill Holes For Grab Bars Shower Doors And Towel Rails, Kit 3 Includes Diamond Tile Hole Saw And Guide For Shower Head Or Faucets..
  • No Wet Saw Rental No Messy Tile Saw, Even Professional Tile Setters Don't Like the Mess a Wet Tile Saw Makes and Even the Best Diamond Blades Can Chip the Edges of The Tiles Forget About Cutting Glass Mosaic Backsplash Tiles on Mesh with Water Saw They Chip Scrunch Up Fly Away and When They Get Wet, They Fall Off Anyway. So, You End Up Pushing Each Tiny Tile Through the Wet Saw with What’s Left of Your Fingers. So, No More Running in And Out the House with Every Tile for Every Single Cut..
  • Not the Old-Fashioned Glass and Tile Cutter It's Not Sharp Its Hard, You Must Apply Pressure to Tile Cutting Wheel to Work Only Work If You Soak Cutter Wheel in Oil and Keep Oiling. Score Tile at Waist Height Not on a Floor. Must Use 2 Hands to Score Hard Tile Never Hold Cu....
Check Stock

Tile Cutters Tile Tools for Cutting Ceramic Tile Glass Tile Cut Straight Lines and Curved Lines Cleanly No Wet Saw No Mess Cut Faster and Cleaner than a Wet Tile saw Replaceable Blade Cuts 1000 Feet

  • For Straight Lines And Up to A Quarter Circle Curve The Tile Cutter Is Great, For Semi Circles Inside Corner Cut Outs Around Outlets Doorways And Toilets You Will Want Kit 1 With Tile Hack Saw Blade For Wall Tile And 4 1/2" Grinder Diamond Tile Blade For Porcelain And Floor Tile, Kit 2 Has Tile Drill Bits For Ceramic And Diamond Drill Bits For Porcelain And Glass To Drill Holes For Grab Bars Shower Doors And Towel Rails, Kit 3 Includes Diamond Tile Hole Saw And Guide For Shower Head Or Faucets..
  • No Wet Saw Rental No Messy Tile Saw, Even Professional Tile Setters Don't Like the Mess a Wet Tile Saw Makes and Even the Best Diamond Blades Can Chip the Edges of The Tiles Forget About Cutting Glass Mosaic Backsplash Tiles on Mesh with Water Saw They Chip Scrunch Up Fly Away and When They Get Wet, They Fall Off Anyway. So, You End Up Pushing Each Tiny Tile Through the Wet Saw with What’s Left of Your Fingers. So, No More Running in And Out the House with Every Tile for Every Single Cut..
  • Not the Old-Fashioned Glass and Tile Cutter It's Not Sharp Its Hard, You Must Apply Pressure to Tile Cutting Wheel to Work Only Work If You Soak Cutter Wheel in Oil and Keep Oiling.....
Check Stock

6-3/8 Inch Hole Saw with Heavy Duty Arbor, 6 3/8”Recessed Lighting Hole Saw with 1-1/2 Inch Cutting Depth, Bi-Metal Hole Cutter for Smoothly Cutting Ceiling Tile Drywall Plywood Plaster Metal Plastic

  • ...duty steel construction and carbide grit edge, ensuring perfect drilling performance and providing the fastest, most consistent and longest lasting cutting.
  • 【Recessed Lighting Hole Saw】The 6 3/8inch recessed lighting hole saw can drill precise holes fast in varied ceiling materials like drywall, plywood, ceiling tile, fiberglass, cement board, plaster and MDF.
  • 6Inch recessed light fixtures requiring the 6-3/8" hole saw that suitable for most major brands of 6-Inch (162 mm) recessed lighting fixtures.
  • 【Wide Applications 162MM Hole Drilling Cutter】Made with a continual rim, Bi-Metal hole saw cut metal and wood quickly and cleanly without tearing the material, widely used for cutting 6inch holes in metal, plaster, wood, plastic, acrylic-board, steel and aluminum.
  • Essential home hole cutter for ceiling lights, recessed light, cornhole board, air ducts, speakers, range hood.
  • 【Smooth and Fast Cutting】Designed with the non-binding clean edge and sharp carbide teeth, the heavy duty 6-3/8” hole saw can cutting faster, smoother, and more precise holes than most hole saw on the market.
  • Widely used in plate holes, household wood, galvanized pipe, gypsum board and other opening operations.
  • 【Package & Size】The package includes 1pcs 6-3/8Inch hole saw....
Check Stock

WoWSupM 6-3/8 ,4-3/8 inch Recessed Light Installation kit Carbide Grit Hole Saw Cutting Drywall, Ceilin Tile　for 6” ,4”Lights

  • 【Package】The Carbide grit hole saw Installation light kit includes:1pcs of 4-3/8”, 1pcs of 6-3/8" carbide drill bits(Black or Red), 1pcs of 0.43” hex shank arbor, 2pcs of Ø0.25”x 3.5" HSS pilot drill bits..
  • [Application] This Carbide grit installation light hole saw kit is For 4”, 6” recessed light, Cutting Drywall, Plaster, Ceiling ,Corn Hole Board, Acoustical Tile. Cutting depth: Up to 1” ..
  • [Advantage 1] The carbide grit teeth hardness over 80HRC.It is more sharp ,hard. It’s a longer life in abrasive material..
  • [Advantage 2] The specially back removes the plug easily. It’s faster than bi-metal hole saw 2 times..
  • [Advantage 3] The specially sharp teeth cuts more smooth,clean . It is more faster than tradition carbide grit hole saw up to 30%. It is more faster than tradition bi-metal hole saw up to 50%..
Check Stock

4 inch Deep Hole Saw Carbide, 2.36” Cutting Depth for Multiple Material Hardy Plank MDF Wall Tile 10X More cuts 5X More Faster

  • 1, The Carbide Tipped Teeth hardness HRC overs 80. It’s more hard, more shape, longer life. Up to 10X times more Cuts than standard bi-metal hole saw drilling for Hardy plank. Up to 5X times more Speed than standard bi-metal hole saw drilling for Hardy plank..
  • 2, The big slot design is to remove the plug easily. Up to 5 times Faster than standard hole saw..
  • 3, Max cutting depth:2.36 “( 60mm) . Replaced the following drill bits: Spade bit, Forstner bit, Auger bit, bi-metal hole saw..
  • 4, Ideal drilling for multiple materials: Hardy Plank, Hard wood（not with nail), Drywall, MDF, Fiberglass, Wall Tile, Air Brick, Plasterboard. Cutting material MOHS hardness ：Not up to 6 . For use in standard rotary drills. Not for use in Hammer mode..
  • 5，This carbide hole saw cutter includes: 4”(102mm) carbide tipped hole saw , 1 of 0.34”(8.6mm) hex shank arbor, 1 of Ø1/4”x4.3”(110mm) silver HSS pilot drill bit for wood. 1 of Ø1/4”x4.3”(110mm) carbide tipped pilot drill bit for hardy plank, stone, wood..
Check Stock

Lenox Tools - T29964-64CG LENOX Tools Hole Saw, Carbide Grit, 4-Inch or 102mm (2996464CG)

  • Carbide grit hole saw cuts through a wide range of abrasive materials.
  • Hole saw has a clean-cutting carbide grit edge that won't snag or chip when cutting thin materials.
  • Use the hole saw with a 2L or 7L standard arbor or a 2L SNAP-BACK arbor.
  • Heat resistant carbide teeth for long life in tile and stainless steel..
Check Stock

HomeyMosaic 10-Sheets Stainless Steel Backsplash Peel and Stick Art 3D Metal Tile Self-Adhesive Mosaic Kitchen Bathroom Stove Home Accent Wall Decor,Copper

  • ✔ Just peel and stick:Directly stick the tile on wall, save your time and money on labor. Easy for installation.Each backsplash tile sheet has self-adhesive back sticker, no grout.Strong stickiness, will not fall off.(Not Magnetic).
  • ✔Finish: Each sheet has 4 kinds of 3D rock raised pattern mixed mirror stainless steel particles, which can be mixed or installed separately.Each design has consistently adhered to and unique production process,the natural Stainless Steel material into creative design..
  • ✔Excellent applications for wall decoration, such as kitchen,bedroom,laundry rooms,shower enclosure,bathtub surround or in-home accent wall etc.The tile's surface is resistant to heat and moisture,easy wipe to remove the stains..
  • ✔ Package: There are 10 sheets in a box covering 10 square feet(12*12*0.16 Inch per sheet). 1% extra wastage is recommended in every project..
  • ✔WARNING:The surface of this tile is made of real stainless steel material.If you need to cut this tile, installation will be a little bit difficult. The edges of this tiles have been processed rounded, if ....
Check Stock

Drilax 4 Inch Diamond Hole Saw Ceramic Porcelain Tile Quartz Granite Countertop Glass Bottle Super Long Life Vacuum Brazed Technology Single Pack Tile Drill Bit 4 inch

  • 4 inch super long life vacuum brazed diamond hole saw, tile drill bits, glass drill bits, ceramic drill bits for pots.
  • Standard 3/8 inch shank fits standard drill electric or cordless..
  • High quality, diamond drill bits, glass drill bit, hole saw drill bit diamond - DRILL THROUGH TILES and Backer Cement Board.
  • Extra long (tall) diamond drill bits for ceramic tile, diamond core bits for granite and quartz countertop.
  • Tall enough to go through 3cm thick countertops ceramic tile, diamond core bits for granite and quartz countertop.
Check Stock

HLOFIZI 4 Inch Carbide Grit Hole Saw for Recessed Lights and Dryer Vent, Cuts Through Stucco, Ceiling Old Plaster, Drywall, Cement Board, Hard Wood with 1-1/2\ Depth, Up to 6X Faster

  • 4 inch hole saw ideal for installing recessed lighting, dryer vent hole, and other roof vent.
  • Drilling holes through lots of abrasive materials, ceiling stucco, old plaster, drywall, hard wood, plywood, sheetrock, cement board, plastic, PVC. Not recommended for cutting metal sheet, brick, concrete block, cement tile.
  • Constructed with long-lasting tungsten carbide grit edge, 4 in. hole saw easy and fast cuts thick wood, plaster stucco ceiling & wall. Cutting depth 1-1/2 inch.
  • Clean and smooth cutting, slot for easy plug removal. Comes with arbor and carbide-tipped pilot drills. Hole saw arbor: fit 3/8" chuck.
  • 100% SATISFACTION GURANTEED: If you are dissatisfied with our 4" carbide hole saw for any reason, return your order within 90-Days for full refund, we will always go above and beyond to ensure you are happy with your customer experience. We appreciate all your remarks and comments. They are the key tools to develop and improve our hole saw.
Check Stock

tonchean 6PCS Drill Bits Hole Saw Set Carbide Hole Cutter Set 5/8-2inch(16-51mm) Heavy Duty Hole Saw Kit for Plastic, Stainless Steel, Metal, Iron, Aluminum, Alloy, Wood, with Aluminum Case

  • ... time to put it to use. At tonchean, we provide a high-quality hard and tough aluminum case for each hole saw kit for easy storage and convenience..
  • 【Wide Application】Widely used in stainless steel plate, hard metal, iron, mild steel, alloy steel, aluminum, FRP, and plastic to drilling holes. Not recommended for tile, glass, concrete, stone..
Check Stock