ReviewsTiles glass Drill Bit

10 Pcs Masonry Drill Bit Set with Strength Carbide Tips Glass Drilling Bits for Ceramic Tile Wood Porcelain Mirror Plastic Marble Wall, 1/8, 3/16, 1/4, 5/16, 3/8, 1/2 Inch.

  • 10 PCS DRILL BITS: measured 1x1/8”, 1x5/32”, 1x3/16”,4x1/4”,1x5/16”,1x3/8”,1x1/2”, the long drilling bits with hex shank can be firmly and stably installed on the electric drill, they’re suitable for drilling holes in ceramic tiles and mirrors..
  • SUPERIOR QUALITY: made of premium metal alloy and coated with zinc, glass drill set is rust-proof and corrosion-resistant, and the strength carbide tip of masonry drill bits for concrete is wear-resistant and durable..
  • SPECIAL CARBIDE TIP: flat designed tip of masonry drill bit is sharp and performs well in penetrating objects, and the holes drilled are round and smooth without broken edges or tremor phenomenon..
  • MULTIPLE FUNCTION: drill bit set with hex shank is widely applicable to ceramic tile, porcelain pot, marble, glass, wood and plastic, and can be used for installing mirror, towel rack and toilet paper roll in bathroom..
  • PROFESSIONAL CUSTOMER SERVICE: please do not drill hole in the hard ceramic tile.
  • please do not use our masonry drill bit set with hammer drill, if you have any questions about this hex shank glass drill kit, please feel free to contact us..
Check Stock

SNUG Fasteners Five (5) 5/32\ x 5-1/2\ Carbide Tip Masonry Drill Bits for Concrete, Brick, or Block (SNG534)

  • ❶HIGH-QUALITY HARD ALLOY: The cutter head is made of cemented carbide. Hardness up to 45HRC, Triangular cutter head resistance is smaller. And it can improve work efficiency, higher hardness than ordinary drill bit, more wear-resistant..
  • ❷EXQUISITE CRAFTSMANSHIP: The surface of the drill bit is treated by fine polishing, and the new electroplating process can prevent the drill bit from rusting and prolong the life of the drill bit..
  • ❸10 PCS DRILL BIT SET WITH 6 DIFFERENT SIZES: 5/32” (4mm), 3/16” (5mm),1/4” (6mm), 5/16” (8mm) ,3/8” (10mm), 1/2” (12mm) fit your different needs..
  • ❹NEW DESIGN: U-shaped drain groove, spiral handle design, easy to remove chips during work, smoother drilling..
  • ❺WIDELY USAGE: It can be used for drilling walls, bricks, ceramic, wood, glass, tiles, stainless steel, concrete, etc. Remember to add Water or coolant when drilling..
Check Stock

Drilax 4-1/8 inch Diamond Hole Saw Plaster Quartz Glass Ceramic Porcelain Tile Marble Granite Drilling Tool Drill Bit Toilet Shower Valve Cutout Recessed Light Installation Ceiling Hole 4 1/8 in

  • DUSTLESS and FAST Large Size Drilling for Floor, Wall Tiles, Toilet Cutout, Shower Diverter Valves. 4-1/8 inch Diamond Hole Saw Drill Bit.
  • DUSTLESS - FAST - CLEAN PROFESSIONAL Holes in Tiles, Glass, Fish Tanks, Marble, Granite Countertop, Ceramic, Porcelain.
  • Use water as coolant to prolong the tool life. DESIRED RESULTS in Granite, Ceramic & Porcelain Tiles, Glass, Marble, Slate, and many types of Stones. No need for a pilot drill..
  • Depth of Cut: 1-1/8 inch - STANDARD 3/8 inch Shank Use Standard Electric or Cordless Rotary Tools or Drill.
  • Plaster Ceiling Holes for Recessed Light Installation.
Check Stock

‎AIFIZO 7PCs Dry Diamond Drill Bits Set for Many Hard Materials Granite Marble Tile Ceramic Stone Glass (NOT for Wood) Round Shank Diamond Hole Saw Kit Diamond Tipped Drill Bit

  • 【Application Scenarios】The Dry Diamond Core Drill Bits Kit is designed for perforating hard materials specifically such as tiles and floor tiles made of granite marble, ceramic, glass mirror. Not suitable for wood materials..
  • 【Package Contents】There are 7 diamond tipped drill bits in one set of drill bits. Each drill bit is made of cemented carbide which is manufactured by vacuum brazing diamond technology with special lubricating wax in the central control tube..
  • 【Adaptation Tool】Round shanks are compatible with most machines such as hand drills, angle grinders and bench drills. Wet and dry use, water can be used to cool the drill bit and prolong the service life..
  • 【Size of Drill】 Bore Size: 5mm 6mm 8mm 10mm 12mm 14mm 16mm,a total of 7 drills. Drilling is smooth..
  • 【Easy to Use 】Each drill is individually packaged to ensure that each drill will not be worn out before use. Be sure to take safety measures when using it to avoid injury..
Check Stock

AIFIZO 7PCs Dry Diamond Drill Bits Set for Many Hard Materials Granite Marble Tile Ceramic Stone Glass (NOT for Wood) Hex Shank Diamond Hole Saw Kit Diamond Drill Bits for Porcelain Tile

  • 【Application Scenarios】The Dry Diamond Core Drill Bits Kit is designed for perforating hard materials specifically such as tiles and floor tiles made of granite marble, ceramic, glass mirror. Not suitable for wood materials..
  • 【Package Contents】There are 7 diamond bits in one set of drill bits. Each drill bit is made of cemented carbide which is manufactured by vacuum brazing diamond technology with special lubricating wax in the central control tube..
  • 【Adaptation Tool】Hex shanks are compatible with most machines such as hand drills, angle grinders and bench drills. Wet and dry use, water can be used to cool the drill bit and prolong the service life..
  • 【Size of Drill】Bore Diameter: 5mm 6mm 8mm 10mm 12mm 14mm 16mm, a total of 7 drills. Drilling is smooth..
  • 【Easy to Use 】Drilling is smooth. Each drill is individually packaged that ensure each drill will not be worn out before use. Be sure to take safety precautions when using it to avoid injury..
Check Stock

kwb Diamond Tile Hole Drill for Angle Grinder, Hole Saw with M14 Mount, Diamond Drill bit Diameter 42 mm

  • Diamond scattered dry cut hole saws (M14) are equipped with high-quality, temperature-resistant industrial diamonds and are therefore suitable for high demands in the do-it-yourself sector, but also for professional use..
  • The glass and tile drill has a length of 60 mm and a cutting depth of 40 mm with a hole saw diameter of 42 mm. It can be used in all commercially available angle grinders with an M14 threaded spindle..
  • The glass drill is filled with cooling wax and requires no additional cooling.
  • the time-consuming preparation for this is no longer necessary. The tool made of high-quality materials enables the ambitious user to work with high drilling speeds and a long service life..
  • The dry-cutting hole saw with its diamond-spread drill bit is ideal for dry drilling of hard and brittle materials. It is thus possible, for example, to drill holes for sockets, switches and flush-mounted sockets in tiles or glass. Ceramics, porcelain stoneware, granite and marble can also be processed with the diamond tipped drill bit..
  • The drill is delivered protected in a practical screw tube packaging. (Art. No. 500242).
Check Stock

Drilax 2 3/4 inch Diamond Drill Bit Hole Saw Ceramic Porcelain Tiles Glass Granite Quartz 2.75 2-3/4 Single Pack

  • DIAMOND TIPPED HOLE SAW DRILL BIT 2-3/4 inch for drain holes, quartz, shower, faucet, kitchen and bathroom upgrades..
  • EASY TO USE Diamond Drill Bits. Start at an angle, go vertical, do not apply too much pressure. Keep the tool wet for cooling..
  • WORKS with STANDARD electric, cordless or upright drill presses. Shank size is 3/8 inch..
  • DRILL HOLES in glass, porcelain ceramic tiles, plant pots, fish tanks, granite, marble with diamond coated drill bit hole saw..
  • Tile installation, tiling made easy for Diamond Hole Saw Tools. Shank size is 3/8" - suitable for all standard cordless or drills..
Check Stock

12 pcs Concrete Drill Bit and Masonry Drill Bit Set，Carbide Drill Bit, Diamond Drill Bits and Tile Drill Bits Suitable for Tile/Concrete/Brick/Glass/Plastic/Wood etc.

  • ❶HIGH-QUALITY HARD ALLOY: The cutter head is made of cemented carbide. Hardness up to 45HRC, Triangular cutter head resistance is smaller. And it can improve work efficiency, higher hardness than ordinary drill bit, more wear-resistant..
  • ❷EXQUISITE CRAFTSMANSHIP: The surface of the drill bit is treated by fine polishing, and the new electroplating process can prevent the drill bit from rusting and prolong the life of the drill bit..
  • ❸15 PCS DRILL BIT SET WITH 6 DIFFERENT SIZES: 5/32” (4mm), 3/16” (5mm),1/4” (6mm), 5/16” (8mm) ,3/8” (10mm), 1/2” (12mm) fit your different needs..
  • ❹NEW DESIGN: U-shaped drain groove, spiral handle design, easy to remove chips during work, smoother drilling..
  • ❺WIDELY USAGE: It can be used for drilling walls, bricks, ceramic, wood, glass, tiles, stainless steel, concrete, etc. Remember to add Water or coolant when drilling..
Check Stock

Mgtgbao 10pc 5MM Masonry Drill Bits +Mgtgbao 10pc 6MM Masonry Drill Bits

  • ➊HIGH-QUALITY MATERIALS：It is made of high quality YG6X alloy as raw material. The process of oxynitriding of the cutter head strengthen the drill hardness..
  • ➋SURFACE ELECTROPHORETIC PAINT PROCESS: Full-grinding and anti-rust treatment, clean and sharp without burrs .The drill bit is more wear-resistant and more durable .Fully automated polishing: Polished CNC is fully automated, each one is unified..
  • ➌UNIQUE CROSS ANGLE DESIGN :Small incision resistance，feature drilling stably, fast speed, not breaking the border. Opening neat, smooth, no broken edges, no tremor phenomenon, chip easily..
  • ➍WIDE USAGE: Professional glass and tile drill bits provide smooth and accurate drilling in ceramic tiles, marble, thin iron plate, mirrors and glass. Remember to add Water or coolant when drilling..
  • ❺NEW DESIGN: U-shaped drain groove, spiral handle design, easy to remove chips during work, smoother drilling. 10 pcs drill bit set with 5mm (3/16”) sizes: that is 10 x 5mm (3/16”) fit your different needs..
Check Stock

7 Piece Masonry Drill Bits Set 1/8\-1/2\ Concrete Drill Bit with Professional Tungsten Steel Alloy Tip for Tile Brick Cement Concrete Glass Plastic with Industrial Strength Carbide Tip

  • ❶NEW DESIGN: U-shaped drain groove, spiral handle design, easy to remove chips during work, smoother drilling. 10 pcs drill bit set with 5 different sizes: that is3/16” (5mm),1/4” (6mm), 5/16” (8mm) ,3/8” (10mm), 1/2” (12mm) fit your different needs..
  • ❷EXQUISITE CRAFTSMANSHIP: The surface of the drill bit is treated by fine polishing, and the new electroplating process can prevent the drill bit from rusting and prolong the life of the drill bit..
  • ❸HIGH-QUALITY HARD ALLOY: The cutter head is made of cemented carbide. Hardness up to 45HRC, Triangular cutter head resistance is smaller. And it can improve work efficiency, higher hardness than ordinary drill bit, more wear-resistant..
  • ❹NON-SLIP 1/4 HEX SHANK: 1/4 hex shank which makes the electric drill more tight and not easy to slip Making it safer to use.
  • ❺WIDELY USED: It can be used for drilling walls, bricks, wood, glass, tiles, stainless steel, concrete, etc. Remember to add Water or coolant when drilling..
Check Stock

OCR Masonry Drill Bits Set, Triangle Drill Bits Set for Tile, Brick, Cement, Concrete, Glass, Plastic, Cinder Block, Wood, Bits for Power Drills, 6/8/10/12mm, 5pcs

  • 【Material】Triangle Drill Bit is made of high-quality carbon steel, has durability, rust resistance. Spiral chip removal space design to speed up chip removal and improve work efficiency..
  • 【Durable】Carbide tipped drill bits with special sharpening technology ensure drilling efficiency with less incision resistance..
  • 【U Slot Drill】The threaded U-shaped flute design is smooth and flat, allowing the chip to be removal quickly. Greatly improving the punching efficiency..
  • 【Applications】Industrial strength carbide drill bit tip can easily penetrate tiles, glass, cinder blocks, hard plastic, cement, concrete, mirrors, windows, travertine, bricks, wood and more!.
  • 【Package】Total 5 Pcs drill bit with 4 different sizes:6mm, 8mm, 10mm, 12mm. Triangle drill bits are packaged in a hard plastic container..
Check Stock