ReviewsTilt Angle Gauge

DESIGNA Mesh Metal Ventilated Adjustable Laptop Stand for Desk Notebook Tablet Black

7 adjustable height positions：Easily adjusted to achieve a comfortable and ergonomic viewing angle as needed..
Metal Mesh Panels：Fine-gauge metal mesh panels work with tilt construction to supply more efficient Cooling Ventilation for laptop..
Cord Organizer：Six slots cord organizer on the back to keep cords neatly ,accommodates power cords and USB cables ..
Anti-Slip/damper mat：Allows for fixed positions and protects your desk from scratches.
Light weight design：This stand can be fold up for space saving storage, portable..

Check Stock

(2) JBL Pro JRX212 12\ 2000w Professional Passive PA/DJ Speakers 8 Ohm JRX 212

...cores and heavy gauge wire. Progressive Transition high frequency waveguide. 19 mm (.75 in) MDF (Medium Density Fiberboard) enclosure. SonicGuard protects the high frequency driver from excess power without interrupting the performance..
Non-resonant, all-steel handles. 18-gauge hexagon perforated, steel grille Dual-angle pole-mount socket allows the speaker to tilt 10. Specifications: Power Rating : 250 W / 1000 W. Frequency Range (-10 dB) : 60 Hz - 20 kHz. Frequency Response (3 dB) : 80 Hz - 18 kHz.
Sensitivity (@1m) : 98 dB SPL (1w/1m). Nominal Impedance : 8 ohms. Recommended Amplifier Power : 250 W to 500 W into 8 ohms. Maximum SPL : 128 dB. Nominal Dispersion : 90 x 50. Crossover Frequency : 2.1 kHz. Dimensions (H x W x D) : 584 mm x 399 mm x 325 mm (23 in x 15.7 in x 12.8 in).
Weight : 19.5 kg (43 lb). High Frequency Driver : JBI 2414H-C 1" exit compression driver mounted on Progressive Transition Waveguide. Low Frequency Driver : JBI M112-8. Input Connectors : Neutrik Speakon NL-4 (x1).
parallel. Grille : 18-gauge, powder-coated steel.

Check Stock

(2) JBL JRX215 1000w 15" DJ P/A Speakers+(2) 18" 1400w Subwoofers+Powered Mixer

...nsition high frequency waveguide. 19 mm (.75 in) MDF (Medium Density Fiberboard) enclosure. SonicGuard protects the high frequency driver from excess power without interrupting the performance. Non-resonant, all-steel handles.
18-gauge hexagon perforated, steel grille Dual-angle pole-mount socket allows the speaker to tilt 10. Details: Power Rating : 250 W / 1000W. Frequency Range (-10 dB) : 41 Hz - 18 kHz. Frequency Response (3 dB) : 59 Hz - 13 kHz. Sensitivity (1w/1m) : 99 dB SPL. Nominal Impedance : 8 ohms. Recommended Amplifier Power : 250 W to 500 W into 8 ohms. Maximum SPL: 129 dB. Nominal Dispersion : 90 x 50.
Crossover Frequency : 2.2 kHz Dimensions (H x W x D) : 699 mm x 460 mm x 432 mm (27.5 in x 18.1 in x 17 in). Weight : 27.4 kg (60.5 lb). High Frequency Driver : JBI 2414H-C , 1" exit compression driver mounted on Progressive TransitionWave guide. Low Frequency Driver : JBI M115-8A. Input Connectors : Parallel Neutrik Speakon NL-4 (x1).
.25in TS phone jack (x1). Grille : 18-gauge, powder-coated steel. Mounting & Suspension : 36 mm, dual-angle pole-mount socket. :.

Check Stock

General Tools 102 0-Inch to 1-Inch .001-Inch Graduation Micrometer

【Material】- This Angle gauge set is made of high quality stainless steel, high hardness, and durable in use..
【Parameter】- 60 Degree cutting tool for the inspection of tooth‑shaped 55 degree angle and metric thread and inch thread, and also it can measure blade angles..
【Comprehensive Angle Range】- This set of drill bits gauge has a comprehensive angle range: 60 °, 70 °, 90 °, 110 °, 118 °, 125 °, 135 °, 150 ° and 160 °..
【Suitable Utilization】- Diameter drill front edge of the protractor 50 gauge 118 ° angle twist drills grinding gauge is suitable for 118 ° diameter of less than 50mm grinding twist drills..
【Professional Measurement Tool】- This is a practical set of angle gauge set in drill bits angle measuring and drill sharpener inspection..

Check Stock

Shop Fox W1712-6" x 48" Belt/12" Disc Combo Sander

... quick release lever helps you switch and replace sandpaper grits as needed without wasting time. Dust port allows a dust-free operation when connecting with a dust collector. Graphite board ensures the sanding belt running smoothly and extends its service life.
MULTI-ANGLE SANDING: The sanding belt can tilt from 0 to 90 degrees for horizontal and vertical sanding to meet your different projects, the spacious sanding disc worktable can be adjusted from 0 to 60 degrees to meet your different angle needs.
TWO-IN-ONE SANDING MACHINE: The two-in-one sanding machine includes both a 6 x 48-inch belt and a 10-inch disc sander, the angle adjustable spacious sanding disc worktable with aluminum miter gauge can be used on sanding disc.

Check Stock

DigiPas DWL80E Pocket Size Digital Level Electronic Angle Gauge Protractor Angle Finder Bevel Gauge 0.1° 4 inch

DUAL FUNCTIONS - tilt/angle gauge to set and also check relative angles between two surfaces using Alternate Zero function.
EASY RE-CALIBRATION by user back to factory setting with no special fixture required (patented).
RESOLUTION: ±0.1° (0° & 90°), ±0.2° for 1° to....
STRONG MAGNETIC BASE: securely attach to fences, saw blade & base, and other metallic surfaces.
improve accuracy with precise displays in degrees, In/Ft, mm/M, % slope.
Measurement Range 0° ~ +/- 90° x 4 (360°).

Check Stock

Neiko 20699A 1/2\ Drive Torque Angle Gauge, Clear

Torque angle gauge is used specially for later model engines that require a torque to yield fastener.
Easy to use arm attachment is used for holding the gauge in place for an undisturbed work flow while turn plate makes it easy to zero out the gauge.
360 degree scale is large and easy to read with 30 degree intervals and 10 degree increments.
Specs: the angle gauge has a 1/2 inch male and female square drive ratchet handle.
Gauge measures angle of rotation after pre-torque in torque-angle applications.

Check Stock

EctoTach GPS

8 FUNCTIONS: Speedometer, Vehicle tilt angle, Pitch angle, Real-time monitoring of battery voltage status, Satellite time, Compass, Altitude and....
SAFETY ALARM: Precisely show the pitch angle and tilt angle change of the vehicle, when one or both angle is over 40 degree the alarm alerts.
ADJUSTABLE: All three dials are on the one plane, which is clear at a glance. Long press the brightness button for 3s to enter the setting mode, that....
GPS MODULE: M60 Built in High-precision Satellite GPS Signal Module, automatically monitor vehicle driving conditions. Widely applicable to most Asian....
WARRANTY: MR CARTOOL offers 24 MONTHS warranty and 7 x 24 Hours after-sale service. If you have any questions about the M60, you can contact us so....

Check Stock

GemRed 82412 Mini Digital Level Angle Gauge Angle Finder Protractor Inclinometer Aluminum Framework with Magnet

【Great Repeatability and Consistency】This angle gauge is designed with accuracy of ± 0.2° and the resolution is 0.1°. The measuring range: 0 to 360° (4*90°). Display unit: DEGREE only. It provides convenience in woodworking, construction, machinery, telecommunications, automobile etc. It is pre-calibrated in factory..
【Strong Aluminum Framework&Magnetic Flat Base】The digital angle gauge applied sturdy aluminum alloy instead of plastic for the main framework. It’ll provide years’ usage.【Two Measuring Mode】①Checking the true level. ②Checking the relative angle between two surfaces..
【Lower Power Reversible LCD Display with ERROR indicator】 The Digital Angle Gauge has a large LCD display with backlight, which only needs one battery for providing accurate, quick and clear measurements and even you can easily read in dark environment. If the digital angle gauge is used in an incorrect position (e.g. tilts diagonally over 30 degree), display will tell ERROR to make sure that use is getting the accurate measurement..
【Easy Battery Installation】You can install battery easily and need no screwdriver. WIth only one AAA battery, the digital angle gauge works 50 hours averagely. *Automatic shut-off after 5 minutes..

Check Stock

Tool School: The Complete Guide to Using Your Tools from Tape Measures to Table Saws

Micro-Make Super Value Packages Are An Economical Way To Expand Your Workshop Or Get Involved In A New Hobby..
Take our best-selling saw, add some of our most popular accessories for it, and what do you get? A versatile mini woodworking and metal cutting workstation like no other..
Package includes: MicroLux Tilt Arbor Table Saw, 40 Tooth Carbide Tip Saw, Taper Jig, Ripping Gauge Set, Featherboard and Fence Set Blade, Angle Setter/Protractor, Ferrous Cut-Off Disk, and Blank Blade Plates.
Value if purchased separately is $529.60!.

Check Stock

Drill Angle Gauge, 3Pcs Drill Bits Angle Gauge Set Dirll Sharpener Tools S/S Angle Measuring Gage Drill Bit Angle (60 °, 70 °, 90 °, 110 °, 118 °, 125 °, 135 °, 150 °, 160 °)

【Material】: This Angle gauge set is made of high quality stainless steel, high hardness, and durable in use..
【Design】: It is a practical Angle gauge set in drill bits Angle measuring and drill sharpener inspection,and comes with a case, convenient for carrying out..
【Feature】: Diameter drill front edge of the protractor 50 gauge 118 ° apex angle of twist drills grinding gauge suitable for 118 ° apex diameter of not more than 50mm of grinding twist drills..
【Drill Apex Angle】: Check the drill apex angle (60 °, 70 °, 90 °, 110 °, 118 °, 125 °, 135 °, 150 °, 160 °). Cutting tool angle is 60 degrees for a tooth-shaped angle 55 degree angle and metric thread, inch thread inspection, blade and special measuring tools for measuring angles.
【Usage】: Suitable For: Angle measurement.

Check Stock