ReviewsTire Insertion Tool

Tragoods Premium Bicycle Tire Lever Tyre Spoon Iron Changing Tool, Bike Tire Levers Premium Stainless Steel Levers to Repair Bike Tube, Best Tire Changing Tool, Set of 3

  • Repair A Hole in Seconds- if you run tubeless, you need this set of rope plugs! Designed for use with our tubeless repair kit, these tire plugs can fix a flat in seconds. ‘Ram’ a rubberised rope plug in the hole from the outside, re-inflate the tire with a bike pump or CO2 inflator. Job done..
  • Save Your Ride – When a puncture is too large for the tubeless sealant, our tire repair plugs combined with our tire reamer and insertion tool found in our tubeless repair kit make fixing a flat a breeze so that you can quickly get back to the joy of your ride..
  • Quick and Easy Flat Repair - for Mountain, Hybrid, E-Bike, Cyclocross, Gravel Bikes and ATV. Refill pack for our bike tire plug repair kit includes 20 ‘Black’ strips, 0.14 inches / 3.5mm for mountain bike and hybrid tires. Ideal for larger punctures..
  • Built for the Job- our plugs are made from vulcanized butyl rubber, which is an ideal material for emergency puncture repair. Please note that these plugs will need to be replaced after 2 years..
  • Pro Quality – We are so confident about the quality of our products that if you have any product issues, we're very happy to either provide a Refund or a Replacement!.
Check Stock

ARB ARB505 10000011 E-Z Deflator and Speedy Seal Tire Repair Kit

  • ARB505: Corrosion resistant brass/stainless deflator tool // Quality bronze bourdon tube gauge design ensures accuracy is not affected by changes in....
  • Fully geared, solid brass precision movement // Easy to read dial with 1 pressure per square inch increments // Includes protective canvas pouch and....
  • 10000011: Spare repair cords are also available in packs of 50 from ARB, so before you head out on your next 4x4 trip, make sure you've got all the....
  • Includes a quality pencil type tire gauge, insertion and reamer tools, needle nose plyers, lubricant, additional valve accessories and 30 self....
Check Stock

Chrome-Plated Motorcycle Bike Change Kit Anti-Slip Labor-Saving Tire Spoon High Hardness Motorcycle Lever Spoon Remover Repair Tool for Car Motorcycle

  • OTC's Sliding Dual Tire Spoon is configured with mount and demount heads on either end and a 3.5 pound slide hammer mounted mid bar.
  • Bar mounted slide hammer has plenty of travel to deliver the force required to easily insert or remove either spoon tip.
  • Twist-lock feature locks 3.5 lb. slide weight securely in position - it moves when you want it to, stays put when you don't.
  • Unique 'Convex Slip Head' curved design dramatically reduces pinching and allows the spoon to slide easily into and out of the tire bead.
  • built in 'spoon bump' limits spoon insertion depth.
  • 35 inches long with a 3/4 inch diameter shank.
  • tool is made from forged steel to ensure superior strength and rigidity.
Check Stock

ARB 10000011 Speedy Seal 2 - Universal Heavy Duty Tire Repair Kit For Car, Truck, RV, Jeep, ATV, Motorcycle, Tractor, Trailer. Flat Tire Puncture Repair Kit Fix Punctures and Plug Flats 50 String Plug

  • the ARB Speedy Seal II includes a premium spring steel insertion needle with cast handle, hardened steel reamer tool, 40 vulcanizing repair cords, lubricant, quality pliers, blade, spare valve cores, spare valve caps, allen key and a dual chuck pencil type tyre gauge to make checking your pressures a snap..
  • Includes a quality pencil type tire gauge, insertion and reamer tools, needle nose plyers, lubricant, additional valve accessories and 30 self vulcanizing repair cords.
  • Spare repair cords are also available in packs of 50 from ARB, so before you head out on your next 4x4 trip, make sure you've got all the necessary equipment for making emergency repairs.
  • Small Travel Cars, Universal Fitting, Fits Neatly into ARB Roller drawers – RF945, RF1045, RF1355.
Check Stock

ARB ARB601 ARB505 10000011 Digital Tire Inflator with E-Z Deflator and Speedy Seal Tire Repair Kit

  • ARB601: Universal // Large LCD digital readouts with Blue backlight // Rubber bump guard to protect against drops and knocks.
  • ARB505: Corrosion resistant brass/stainless deflator tool // Quality bronze bourdon tube gauge design ensures accuracy is not affected by changes in....
  • 10000011: Spare repair cords are also available in packs of 50 from ARB, so before you head out on your next 4x4 trip, make sure you've got all the....
  • Includes a quality pencil type tire gauge, insertion and reamer tools, needle nose plyers, lubricant, additional valve accessories and 30 self....
Check Stock

Ken-Tool (32130 Wheel Lock Ring Set

  • Great for many motorcycles and bikes tire changes in the garage or travel use.
  • Long enough lever, use it with little effort.
  • 100% brand new and good quality tire changing tool kit includes 2 tire lever tool spoons.
  • Made of hardened stainless steel with polished chrome finish, the tire lever tool spoon is heavy duty, weatherproof and rust resistant.
Check Stock

Jonard FT-6 Flaring and Insertion Tool, 4-1/4\ Length

  • The flaring end of the tool facilitates the expansion of the cable providing easier insertion of "F" connectors.
  • The insertion end makes "F" connector insertion fast and easy, even in cold weather.
  • This tool is recommended for use on polyethylene jacketed cables and plenum cables, and is especially helpful when using tri-shield and quad-shield cables.
Check Stock

KINGBOLEN EL-50448 Plus TPMS Relearn Tool for Ford GM Automotive Tire Pressure Monitor Sensor 315/433 MHz Reset Tool, 2 in 1 Activation Tool for F150/Focus/Lincoln/Buick/Cadillac Vehicle

  • 【Ford & GM Tire Sensor Relearn Tool】The EL-50448 Plus tire pressure monitor sensors 2 in 1 Relearn Tool is perfectly compatible with Ford and GM series cars, including F150, F250, Focus, Lincoln, Mercury, Buick, Cadillac, Chevrolet, GMC, Daewoo, Opel, Isuzu, etc.(Truck is not supported. No support for Toyota and Nissan).
  • 【Easy To Operate】1.Put a new 9v battery into the tool and set the car into TPMS learning model. 2.Start from left-front tire, point antenna against the sidewall of the tire, near the valve stem. 3.Depress the power button, the horn bleeps once then move to the next tire. 4.Follow this order to reset TPMS one by one: front left, front right, rear right, rear left tires. 5.After all sensors reset, the car horns twice means TPMS relearn finished.（9V battery not included）.
  • 【High-quality EL50448 TPMS Relearn Tool】The EL-50448 Plus tire sensors reset tool is portable and convenient, small but high performance, work well on most Ford and GM series cars equipped with 315/433 MHz. With good penetration, the tire pressure sensor can be easily reset and learned..
  • 【Trusted Tire Pressure Activation Tool】Through FCC certification, powerful circuit board and sensitive sensor chip design, our TPMS Relearn Tool EL-50448 Plus can acti....
Check Stock

Tire Lever Repair Tool, 2Pcs Motoycle Bike Tire Lever Tool Spoon Tyre Wheel Changing Repair Set

  • 【 Weatherproof & Rust Resistant 】This tire lever tool spoon is made hardened stainless steel with polished chrome finish, the tire lever tool spoon is heavy duty, weatherproof and rust resistant..
  • 【 Convenient to Use 】Curved end fits securely in the hand. Long enough lever, use it with little effort. Such a practical tool you will need it..
  • 【 Wide Usage 】Great for many motoycles and bikes tire changes in the garage or travel use. This is a perfect choice if you are in need of tire lever tool spoon!.
  • 【 Durable 】100% brand new and good quality tire changing tool kit includes 2 tire lever tool spoons. Stable characteristics, high reliability..
  • 【 Service Guaranteed 】Professional, premium aftermarket replacement. In terms of any problem of this product, you can send emails as soon We will provide you excellent customer service and 100% satisfaction warranty. BUY WITH COFIDENCE!.
Check Stock

Neiko 20600A Tire Spoon Levers, Repair Tool Kit, 11 1/2-Inch Hardened Steel Irons, 2 Rim Protectors, 5-Piece Set

  • CAR-TIRE LEVERS: Need some tire and wheel tools? The steel spoons in this tire-lever kit have curved tips that give you strong prying leverage for quick and simple removal of damaged truck, car, or motorcycle tires for easy self-repair..
  • TIRE & WHEEL TOOLS: This 5-piece tire-changing kit has 3 tire spoons and 2 rim protectors for car and bike tires. Place the protectors on your tire rim and insert the levers above the protectors to leverage the rubber tire away from the rim..
  • FIRM HANDLE GRIP: Each handle has a contoured rubber grip that helps prevent fatigue to your hands during prolonged use. When you need to change a flat tire, these car and motorcycle tire spoons can help get the job done..
  • QUALITY MATERIALS: The rim protectors are constructed with a flexible polypropylene material that keeps your rims protected from damage, and the tire-spoon shafts have a polished chrome finish for smooth insertion into your tires..
  • QUICK STORAGE: These tire-removal tools all fit inside an included brass-grommet hanging bag. You can easily transport them to and from your automotive jobs, and you can hang them from pegs in your workshop when they aren’t in use..
Check Stock

2-in-1 Drip Irrigation Tubing Hole Punch & Fitting Insertion Tool Kit for Easier 1/4' Inch Fitting & Emitter Insertion Drip Sprinkler Systems (Blue)

  • 2-In-1 Punch and Fitting Insert: The drip irrigation hole punch tool is designed to fit for drip tubing punch and 1/4 fitting insertion use.
  • Hold the handle of the drip irrigation tubing punch and clamp the tube, gently press it until the tube is pierced.
  • The hole size is 4 mm/ 0.12 inch to ensure the proper insertion of the connector, fitting and emitter, making the installation more closely fitting..
  • Quality Material: Punch tools are maded made of high-quality plastic and metal, strong and durable, and the puncher has been polished so it will not become dull And can be used for a long time..
  • Application: This 2-in-one drip irrigation tubing hole punch & fitting insertion tool can be used to puncture holes when installing drippers and micro-sprinklers in polyethylene tubing..
  • Easy to Use: Simply press the tool through the tubing and then remove the punch tool with a pre-punched hole left.
  • Insert the fitting into the tubing, then slide the tubing according to the slot and push the fitting into pre-cut hole..
  • Humanized Design: The smartly designed fitting insertion tool will make you feel untired even after using it for a long time.
  • It can help you drill easily and fast and save time and energy for you.
  • The combination of blue and black color makes the dr....
Check Stock