ReviewsTitan 51brake Fluid Tester

CURT 58271 7-Pin RV Blade Trailer Wiring Towing Vehicle Socket Tester, Black

  • VERSATILE. Quickly and confidently confirm the functionality of your vehicle's trailer wiring harness with this connector tester for the taillights, brake lights, reverse lights, turn signals, electric trailer brakes and auxiliary power.
  • SIMPLE TO USE. For each electrical function, an LED lights up indicating a good signal. Just plug the wiring tester into your vehicle's socket and have a helper check the LED signals as you activate them from the driver's seat.
  • EASY GRIP. Plugging in this 7-way trailer light tester into your vehicle is easy with its ergonomic design. It features two hooks on either side of the tester for a better grip when plugging in or unplugging.
  • LONG-LASTING LEDS. To produce a bright, easy-to-read signal and ensure long-lasting use, this vehicle-trailer wiring tester is constructed with LED diodes.
  • DURABLE HOUSING. To resist the elements and maintain reliable performance, the housing of this tow wiring tester is made from durable black plastic that will never rust or corrode.
Check Stock

Mercedes GENUINE 1L Brake Fluid DOT 4 PLUS Ultra Low Viscosity MB Spec 331.0 NEW

  • One 32 fl oz can of STP 18668 Heavy Duty DOT 3 Brake Fluid.
  • Works in all brake systems using DOT 3 brake fluid.
  • Optimizes performance of disc and drum brake systems for easy car care.
  • Brake fluid protects against brake failure from vapor lock.
  • Automotive oil helps to prevent corrosion in the brake system.
  • Use when needed, following the manual's instructions for a brake fluid flush.
Check Stock

Phoenix Systems (3001-B) Brake Fluid Test Strips, 100 Test Strips Per Tube, BrakeStrip, FASCAR, Copper

  • Helps increase the number of needed brake fluid exchange services you perform by providing proof for the needed service..
  • Gives you and your team of service advisors confidence to offer a needed brake fluid exchange..
  • Identifies potential brake flulid related problems before they occur -thereby ensuring your customers safety..
  • Simply remove a test strip from the tube, dip it into brake fluid and 60 seconds later you will know the condition of the brake fluid. (scientific proof).
  • The test follows MAP guidelines and DOT test standards to determine when to change brake flujid. Great for DOT 3, 4 and 5.1 brake fluid (most vehicles use DOT 3 or 4).
Check Stock

UView 560000 Combustion Leak Tester

  • Fast, Economical and Accurate method to test for combustion gas leaks.
  • 16 ounce test fluid good for 16 applications.
  • Positive proof that a leak is present when the tester fluid changes color.
  • Foam lined storage case to protect the tester (glass).
Check Stock

Phoenix Systems (3003-B) Brake Fluid Test Strips, 2 Strips Per Package, Reveals Brake Fluid Condition

  • May save you from paying for an un-needed brake fluid exchange..
  • Gives you the peace of mind that your brake fluid is good and is safely performing its proper function..
  • Identifies potential brake flulid related problems before they occur -thereby ensuring your safety..
  • Simply remove the test strip from the foil wrapper, dip it into your brake fluid and 60 seconds later you will know the condition of your brake fluid. (scientific proof).
  • Great for DOT 3, 4 and 5.1 brake fluid (most vehicles use DOT 3 or 4).
Check Stock

Phoenix Systems (3006-B) Brake Fluid Test Strip Kit, 100 Test Strips and 100 Rating Cards, BrakeStrip, FASCAR

  • Helps increase the number of needed brake fluid exchange services you perform by providing proof for the needed service..
  • Gives you and your team of service advisors confidence to offer a needed brake fluid exchange..
  • Identifies potential brake flulid related problems before they occur -thereby ensuring your customers safety..
  • Simply remove a test strip from the tube, dip it into brake fluid and 60 seconds later you will know the condition of the brake fluid. (scientific proof).
  • The test follows MAP guidelines and DOT test standards to determine when to change brake flujid. Great for DOT 3, 4 and 5.1 brake fluid (most vehicles use DOT 3 or 4).
Check Stock

CATUDIY Automotive Brake Bleeder Kit with Fluid Transfer Pump, Brake Fluid Oil Extractor for Cars Electric Brake System Bleeding Tools with Master Cylinder Adapter Pressure Adjustable 0.6~3bar 110V

  • ⛽【Professional & Widely Use】This brake fluid extractor automotive is used to empty and fill brake fluid in the cars' brake and clutch equipment, while effectively avoid generating air bubbles during the process thanks to its pulsating brake system. We offer a full line of master cylinder adapters with this equipment, available for all vehicles in European, US, and Asian.
  • ⛽【Secure & Reliable】The brake bleeding tools come with a pressure gauge for better observing the fluid exchange pressure value. Also, The oil change pump used to fill the brake fluid reservoir is of pressure monitoring, which will automatically switch itself if cannot build pressure or the pump pull in air. CATUDIY promises 3-year warranty for damage caused by non-human factors.
  • ⛽【Easy & Time-Saving】This brake pressure bleeder tool is very simple to use and can be operated by one person. There are 4 pumps that can change the brake oil in the meantime. Because of its built-in working pressure bleeder pump, you don’t need to connect extra break bleeder vacuum pump kit.
  • ⛽【2 Power Supply Modes】The brake bleeder kit one....
Check Stock

Thorstone Pneumatic Brake Fluid Bleeder Tool Kit, 1L Vacuum Brake Oil Change Set with Extractor and Refill Bottle +4 Master Cylinder Adapters + 2 Air Quick Plugs, for Car, Truck, Motorcycle 90-120PSI

  • PNEUMATIC BRAKE OIL BLEEDING TOOL - This brake bleeder kit is good at exchanging brake and clutch fluid by sucking out waste fluid and air,guiding the new oil to fill the whole brake system on motorcycle car truck and pickup..
  • ONE PERSON OPERATION - Brake jobs are some of the most common vehicle maintenance jobs that can be done at home. Refill bottle can be held on the brake fluid reservoir and a hanger which can hook on the engine hood and keep the bottle above the vehicle bleeder valve. Simple brake bleeder kit one man operation, no need for treading the brake pedal over and again..
  • BRAKE OIL REFILL DEVICE - A long screw fittings on 750ml refill bottle cap with master cylinder adapters to snap on the mouth of the vehicle's brake fluid reservoir, without hand support. Fully open the valve on the long screw, the fluid will flow out and stop once the brake fluid level in the reservoir has been sufficient to cover the threaded port, no need to keep an eye on it..
  • COMPLETE ACCESSORIES - This vacuum brake bleeder kit includes everything you need to quickly and easily remove air from your brakes without creating a mess.
  • 4 master cylinder adapters are suitable for most vehicles (21-30mm, 24-32mm, 28 -37mm, 32-41mm) + 2 air quick plugs + 1.8m long transparent....
Check Stock

ATPEAM Pneumatic Vacuum Brake and Clutch Fluid Bleeder Tool Kit | Car Truck Motorcycle Brake Oil Change Set with Extractor and Refill Bottle, 4 Master Cylinder Adapters, 2 Air Quick Plugs

  • Pneumatic Brake Oil Bleeding Tool: This brake bleeder kit is used for changing brake and clutch oil, as well as suck out old oil and air from replaced brake system on motorcycle car truck and pickup. Connect the extractor to the air compressor and brake caliper, turn on high power air compressor to 90-120PSI, negative pressure is generated in the braking system to suck out the waste fluid and air, and guide the new oil to fill the whole brake system..
  • One Man Operation: Refill bottle can be held on the brake fluid reservoir. On the 1L waste oil extractor bottle, there is a the hanger which can hook on the engine hood and keep the bottle above the vehicle bleeder valve, as well as the trigger locker is also helpful for hand-free when suck. Also, you do not need to tread the brake pedal again and again when use this brake and clutch bleed tool..
  • Automatic Brake Refill Device: There is a long screw fittings on 0.8L refill bottle cap, which can work with the master cylinder adapter to snap on the mouth of the vehicle's brake fluid reservoir, without hand support. Fully open the valve on the long screw, the fluid will flow out, and stop once the brake fluid level in the reservoir has been sufficient to cover the threaded port, no need to keep an eye on it. ....
Check Stock

OEMTOOLS 87045 No Spill Coolant Filling Funnel Kit with Coolant Tester, No Spill Coolant Funnel Kit, Coolant Tester Kit

  • Coolant Filling Kit: 5 direct fit radiator adapters, 4 caps, 2 45 degree elbows, 1 5 inch straight extension, 1 fluid stopper, 1 fluid tester, and 1 clear funnel.
  • Easy to Use: This spill free funnel kit makes coolant filling simple.
  • Select the correct adapter, attach the funnel, and fill.
  • Adapters fit most passenger vehicles and light trucks.
  • Don’t Get Stuck: The 45 degree angled elbows as well as the 5 inch straight extension in the coolant funnel kit allow you to access hard to reach areas.
  • Mess Free Coolant Refill: The fluid stopper prevents drips and spills when removing the funnel from the filler neck.
  • The adapter gaskets also prevent fluid leakage.
  • Test the Waters: The included coolant tester in this spill proof coolant filling kit quickly provides the freezing point of glycol-based coolants.
Check Stock

OEMTOOLS 25036 Bleed-O-Matic One-Man Brake Bleeder Kit, Featuring An Opaque Brake Bleed Bottle w/ Transparent Hoses and Tapered Fittings, No Mess Brake Fluid Bleeding (Packaging May Vary)

  • RELIABLE BRAKE BLEEDING TOOL: Our brake fluid bleeder kit features a reliable magnet for one-man operation.
  • Designed for use on calipers, wheel cylinders, and master cylinders to give you the most effective brake line bleeder kit for your budget.
  • NO MESS BRAKE BLEED: Get a tight fit over calipers with our tapered fittings and transparent brake bleeder hose of our brakes bleeder.
  • The transparent brake bleeder tubing ensures that you’ll know when the brake line is running clear and air-free.
  • ONE MAN OPERATION: No need to use the two-person method for your brake bleed.
  • Attach the one person bleeder's reservoir to the rotor or similar metallic vehicle surface with the strong magnetic attachment and pump the brake.
  • DURABLE BRAKES BLEEDING KIT: The quality construction of our 2 piece design gives you a durable no-mess operation.
  • Bleed brakes while keeping everything clean of caustic brake fluid.
  • Our handy reservoir makes disposal of brake fluid quick and easy.
  • FITS MOST VEHICLES: Our specially tapered fittings work on most vehicles.
  • The hoses hold firmly to the durable brake bleeder bottle and tapered fittings to create a no-mess operation that keeps your components clean of brake fluid.
Check Stock